This patch adds support for requesting the regulator powering the vio pin. Signed-off-by: Sebastian Reichel <sre@xxxxxxxxxx> Reviewed-by: Pavel Machek <pavel@xxxxxx> --- drivers/net/wireless/ti/wl1251/spi.c | 19 +++++++++++++++++-- drivers/net/wireless/ti/wl1251/wl1251.h | 2 ++ 2 files changed, 19 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c index 6abcbc3..0a8aacc 100644 --- a/drivers/net/wireless/ti/wl1251/spi.c +++ b/drivers/net/wireless/ti/wl1251/spi.c @@ -27,6 +27,7 @@ #include <linux/spi/spi.h> #include <linux/wl12xx.h> #include <linux/gpio.h> +#include <linux/regulator/consumer.h> #include "wl1251.h" #include "reg.h" @@ -306,13 +307,26 @@ static int wl1251_spi_probe(struct spi_device *spi) irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING); - ret = wl1251_init_ieee80211(wl); + wl->vio = devm_regulator_get(&spi->dev, "vio"); + if (IS_ERR(wl->vio)) { + ret = PTR_ERR(wl->vio); + wl1251_error("vio regulator missing: %d", ret); + goto out_free; + } + + ret = regulator_enable(wl->vio); if (ret) goto out_free; + ret = wl1251_init_ieee80211(wl); + if (ret) + goto disable_regulator; + return 0; - out_free: +disable_regulator: + regulator_disable(wl->vio); +out_free: ieee80211_free_hw(hw); return ret; @@ -324,6 +338,7 @@ static int wl1251_spi_remove(struct spi_device *spi) free_irq(wl->irq, wl); wl1251_free_hw(wl); + regulator_disable(wl->vio); return 0; } diff --git a/drivers/net/wireless/ti/wl1251/wl1251.h b/drivers/net/wireless/ti/wl1251/wl1251.h index f396a95..b0bfdf5 100644 --- a/drivers/net/wireless/ti/wl1251/wl1251.h +++ b/drivers/net/wireless/ti/wl1251/wl1251.h @@ -279,6 +279,8 @@ struct wl1251 { int irq; bool use_eeprom; + struct regulator *vio; + spinlock_t wl_lock; enum wl1251_state state; -- 1.8.4.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html