Re: [PATCHv3 4/4] arm: dts: Add support for SD/MMC on SOCFPGA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, 2013-12-05 at 04:07 +0100, Arnd Bergmann wrote:
> On Wednesday 04 December 2013, dinguyen@xxxxxxxxxx wrote:
> 
> > +
> > +* compatible: should be
> > +        - "altr,socfpga-dw-mshc": for controllers with Altera SOCFPGA
> > +          specific extensions.
> > +
> > +* samsung,dw-mshc-sdr-timing: See exynos-dw-mshc.txt for more information about
> > +	this property.
> > +
> > +Example:
> > +	dwmmc0@ff704000 {
> > +		compatible = "altr,socfpga-dw-mshc", "snps,dw-mshc";
> > +		reg = <0xff704000 0x1000>;
> > +		interrupts = <0 139 4>;
> > +		fifo-depth = <0x400>;
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +		clocks = <&l4_mp_clk>, <&sdmmc_clk>, <&sysmgr_sdr_mmc>;
> > +		clock-names = "biu", "ciu", "sysmgr-sdr-mmc";
> 
> You add a "sysmgr-sdr-mmc" clock here without documenting it. I think what you
> actually mean here is
> 
> > +		clocks = <&l4_mp_clk>, <&sysmgr_sdr_mmc>;
> > +		clock-names = "biu", "ciu";
> 
> i.e. the <&sysmgr_sdr_mmc> clock is actually your "ciu". If I understand your
> code correctly, the dw-mshc has exactly two clock inputs, biu and ciu, and
> you use sysmgr to provide ciu. The driver code already contains logic to
> set the rate of the ciu clock, and you just need to hook into that.

Ah yes! This is fantastic. I can definitely just re-use the ciu-clk
hook.

Thanks!

Dinh
> 
> 	Arnd
> 



--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux