From: Oliver Schinagl <oliver@xxxxxxxxxxx>
This patch adds sunxi sata support to A10 and A20 boards that have such
a connector. Some boards also feature a regulator via a GPIO and support
for this is also added.
Signed-off-by: Olliver Schinagl <oliver@xxxxxxxxxxx>
---
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 26 +++++++++++++++++++++++++
arch/arm/boot/dts/sun4i-a10.dtsi | 9 +++++++++
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 26 +++++++++++++++++++++++++
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 26 +++++++++++++++++++++++++
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 26 +++++++++++++++++++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 9 +++++++++
6 files changed, 122 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 425a7db..b620084 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -42,7 +42,18 @@
};
};
+ sata: ahci@01c18000 {
+ pwr-supply = <®_ahci_5v>;
+ status = "okay";
+ };
+
pinctrl@01c20800 {
+ ahci_pwr_pin: ahci_pwr_pin@0 {
+ allwinner,pins = "PB8";
+ allwinner,function = "gpio_out";
+ allwinner,driver = <0>;
+ allwinner,pull = <0>;
+ };
led_pins_cubieboard: led_pins@0 {
allwinner,pins = "PH20", "PH21";
allwinner,function = "gpio_out";
@@ -86,4 +97,19 @@
linux,default-trigger = "heartbeat";
};
};
+
+ regulators {
+ compatible = "simple-bus";
+ pinctrl-names = "default";
+
+ reg_ahci_5v: ahci-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "ahci-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-0 = <&ahci_pwr_pin>;
+ gpio = <&pio 1 8 0>;
+ enable-active-high;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 4dccdb0..53c6cdb 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -306,6 +306,15 @@
#size-cells = <0>;
};
+ sata: ahci@01c18000 {
+ compatible = "allwinner,sun4i-a10-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <0 56 1>;
+ clocks = <&ahb_gates 25>, <&pll6 0>;
+ clock-names = "ahb_sata", "pll6_sata";
+ status = "disabled";
+ };
+
intc: interrupt-controller@01c20400 {
compatible = "allwinner,sun4i-ic";
reg = <0x01c20400 0x400>;
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 5c51cb8..99c5e78 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -34,7 +34,18 @@
};
};
+ sata: ahci@01c18000 {
+ pwr-supply = <®_ahci_5v>;
+ status = "okay";
+ };
+
pinctrl@01c20800 {
+ ahci_pwr_pin: ahci_pwr_pin@0 {
+ allwinner,pins = "PB8";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
led_pins_cubieboard2: led_pins@0 {
allwinner,pins = "PH20", "PH21";
allwinner,function = "gpio_out";
@@ -77,4 +88,19 @@
gpios = <&pio 7 20 0>;
};
};
+
+ regulators {
+ compatible = "simple-bus";
+ pinctrl-names = "default";
+
+ reg_ahci_5v: ahci-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "ahci-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-0 = <&ahci_pwr_pin>;
+ gpio = <&pio 1 8 0>;
+ enable-active-high;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 8a1009d..19af23e 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -19,7 +19,18 @@
compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
soc@01c00000 {
+ sata: ahci@01c18000 {
+ pwr-supply = <®_ahci_5v>;
+ status = "okay";
+ };
+
pinctrl@01c20800 {
+ ahci_pwr_pin: ahci_pwr_pin@0 {
+ allwinner,pins = "PH12";
+ allwinner,function = "gpio_out";
+ allwinner,driver = <0>;
+ allwinner,pull = <0>;
+ };
led_pins_cubietruck: led_pins@0 {
allwinner,pins = "PH7", "PH11", "PH20", "PH21";
allwinner,function = "gpio_out";
@@ -60,4 +71,19 @@
gpios = <&pio 7 7 0>;
};
};
+
+ regulators {
+ compatible = "simple-bus";
+ pinctrl-names = "default";
+
+ reg_ahci_5v: ahci-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "ahci-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-0 = <&ahci_pwr_pin>;
+ gpio = <&pio 7 12 0>;
+ enable-active-high;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index ead3013..23ed708 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -34,7 +34,19 @@
};
};
+ sata: ahci@01c18000 {
+ pwr-supply = <®_ahci_5v>;
+ status = "okay";
+ };
+
pinctrl@01c20800 {
+ ahci_pwr_pin: ahci_pwr_pin@0 {
+ allwinner,pins = "PB8";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PH2";
allwinner,function = "gpio_out";
@@ -91,4 +103,18 @@
default-state = "on";
};
};
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_ahci_5v: ahci-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "ahci-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-0 = <&ahci_pwr_pin>;
+ gpio = <&pio 1 8 0>;
+ enable-active-high;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 0552a64..b72c69e 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -368,6 +368,15 @@
};
};
+ sata: ahci@01c18000 {
+ compatible = "allwinner,sun4i-a10-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <0 56 1>;
+ clocks = <&ahb_gates 25>, <&pll6 0>;
+ clock-names = "ahb_sata", "pll6_sata";
+ status = "disabled";
+ };
+
timer@01c20c00 {
compatible = "allwinner,sun4i-timer";
reg = <0x01c20c00 0x90>;
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
