Add nodes for the two SATA PHYs on kirkewood.
Add node for the one SATA PHY on Dove.
Add pHandles to the PHYs in the sata nodes.
Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
---
arch/arm/boot/dts/dove.dtsi | 11 +++++++++++
arch/arm/boot/dts/kirkwood-6281.dtsi | 2 ++
arch/arm/boot/dts/kirkwood-6282.dtsi | 2 ++
arch/arm/boot/dts/kirkwood.dtsi | 18 ++++++++++++++++++
4 files changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 113a8bc7bee7..d56b3c675249 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -490,10 +490,21 @@
reg = <0xa0000 0x2400>;
interrupts = <62>;
clocks = <&gate_clk 3>;
+ phys = <&sata_phy0>;
+ phy-names = "0";
nr-ports = <1>;
status = "disabled";
};
+ sata_phy0: sata_phy@0 {
+ compatible = "marvell,mvebu-sata-phy";
+ reg = <0xa2000 0x0334>;
+ clocks = <&gate_clk 3>;
+ clock-names = "sata";
+ #phy-cells = <0>;
+ status = "ok";
+ };
+
rtc: real-time-clock@d8500 {
compatible = "marvell,orion-rtc";
reg = <0xd8500 0x20>;
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index 650ef30e1856..92a1c747456a 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -89,6 +89,8 @@
interrupts = <21>;
clocks = <&gate_clk 14>, <&gate_clk 15>;
clock-names = "0", "1";
+ phys = <&sata_phy0>, <&sata_phy1>;
+ phy-names = "0", "1";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 3933a331ddc2..dfa6b073cf00 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -117,6 +117,8 @@
interrupts = <21>;
clocks = <&gate_clk 14>, <&gate_clk 15>;
clock-names = "0", "1";
+ phys = <&sata_phy0>, <&sata_phy1>;
+ phy-names = "0", "1";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 8b73c80f1dad..5558b89d48ce 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -282,5 +282,23 @@
/* set phy-handle property in board file */
};
};
+
+ sata_phy0: sata_phy@0 {
+ compatible = "marvell,mvebu-sata-phy";
+ reg = <0x82000 0x0334>;
+ clocks = <&gate_clk 14>;
+ clock-names = "sata";
+ #phy-cells = <0>;
+ status = "ok";
+ };
+
+ sata_phy1: sata_phy@1 {
+ compatible = "marvell,mvebu-sata-phy";
+ reg = <0x84000 0x0334>;
+ clocks = <&gate_clk 15>;
+ clock-names = "sata";
+ #phy-cells = <0>;
+ status = "ok";
+ };
};
};
--
1.8.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
