[PATCH 3/7] ARM: dts: add dts files for exynos5260 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




From: Arun Kumar K <arun.kk@xxxxxxxxxxx>

The patch adds the dts files for exynos5260 and for xyref
evt0 board.

Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
Signed-off-by: Arun Kumar K <arun.kk@xxxxxxxxxxx>
---
 arch/arm/boot/dts/Makefile                      |    1 +
 arch/arm/boot/dts/exynos5260-pinctrl.dtsi       |  586 +++++++++++++++++++++++
 arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts |   85 ++++
 arch/arm/boot/dts/exynos5260.dtsi               |  315 ++++++++++++
 4 files changed, 987 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos5260-pinctrl.dtsi
 create mode 100644 arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts
 create mode 100644 arch/arm/boot/dts/exynos5260.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 741bf73..8d26135 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -63,6 +63,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
+	exynos5260-xyref5260-evt0.dtb \
 	exynos5420-smdk5420.dtb \
 	exynos5440-sd5v1.dtb \
 	exynos5440-ssdk5440.dtb
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
new file mode 100644
index 0000000..67aaee7
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -0,0 +1,586 @@
+/*
+ * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	pinctrl@11600000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa2: gpa2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb0: gpb0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb1: gpb1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb2: gpb2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb3: gpb3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb4: gpb4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb5: gpb5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd0: gpd0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd2: gpd2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe0: gpe0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe1: gpe1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk0: gpk0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart0_data: uart0-data {
+			samsung,pins = "gpa0-0", "gpa0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart0_fctl: uart0-fctl {
+			samsung,pins = "gpa0-2", "gpa0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_data: uart1-data {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_fctl: uart1-fctl {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_data: uart2-data {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi0_bus: spi0-bus {
+			samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi1_bus: spi1-bus {
+			samsung,pins = "gpa2-5", "gpa2-6", "gpa2-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		usb3_vbus0_en: usb3-vbus0-en {
+			samsung,pins = "gpa2-4";
+			samsung,pin-function = <1>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s1_bus: i2s1-bus {
+			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+					"gpb0-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm1_bus: pcm1-bus {
+			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+					"gpb0-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spdif1_bus: spdif1-bus {
+			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi2_bus: spi2-bus {
+			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c0_hs_bus: i2c0-hs-bus {
+			samsung,pins = "gpb3-0", "gpb3-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c1_hs_bus: i2c1-hs-bus {
+			samsung,pins = "gpb3-2", "gpb3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c2_hs_bus: i2c2-hs-bus {
+			samsung,pins = "gpb3-4", "gpb3-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c3_hs_bus: i2c3-hs-bus {
+			samsung,pins = "gpb3-6", "gpb3-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c4_bus: i2c4-bus {
+			samsung,pins = "gpb4-0", "gpb4-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c5_bus: i2c5-bus {
+			samsung,pins = "gpb4-2", "gpb4-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c6_bus: i2c6-bus {
+			samsung,pins = "gpb4-4", "gpb4-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c7_bus: i2c7-bus {
+			samsung,pins = "gpb4-6", "gpb4-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c8_bus: i2c8-bus {
+			samsung,pins = "gpb5-0", "gpb5-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c9_bus: i2c9-bus {
+			samsung,pins = "gpb5-2", "gpb5-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c10_bus: i2c10-bus {
+			samsung,pins = "gpb5-4", "gpb5-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c11_bus: i2c11-bus {
+			samsung,pins = "gpb5-6", "gpb5-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_gpio_a: cam-gpio-a {
+			samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+				"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+				"gpe1-0", "gpe1-1";
+				samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_gpio_b: cam-gpio-b {
+			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_i2c1_bus: cam-i2c1-bus {
+			samsung,pins = "gpf0-2", "gpf0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_i2c0_bus: cam-i2c0-bus {
+			samsung,pins = "gpf0-0", "gpf0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_spi0_bus: cam-spi0-bus {
+			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_spi1_bus: cam-spi1-bus {
+			samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		hdmi_hpd_irq: hdmi-hpd-irq {
+			samsung,pins = "gpx3-7";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@12290000 {
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc2: gpc2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc3: gpc3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc4: gpc4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		sd0_clk: sd0-clk {
+			samsung,pins = "gpc0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cmd: sd0-cmd {
+			samsung,pins = "gpc0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cd: sd0-cd {
+			samsung,pins = "gpc0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus1: sd0-bus-width1 {
+			samsung,pins = "gpc0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus4: sd0-bus-width4 {
+			samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus8: sd0-bus-width8 {
+			samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_clk: sd1-clk {
+			samsung,pins = "gpc1-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cmd: sd1-cmd {
+			samsung,pins = "gpc1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cd: sd1-cd {
+			samsung,pins = "gpc1-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus1: sd1-bus-width1 {
+			samsung,pins = "gpc1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus4: sd1-bus-width4 {
+			samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus8: sd1-bus-width8 {
+			samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_clk: sd2-clk {
+			samsung,pins = "gpc2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cmd: sd2-cmd {
+			samsung,pins = "gpc2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cd: sd2-cd {
+			samsung,pins = "gpc2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus1: sd2-bus-width1 {
+			samsung,pins = "gpc2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus4: sd2-bus-width4 {
+			samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+	};
+
+	pinctrl@128B0000 {
+		gpz0: gpz0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpz1: gpz1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts b/arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts
new file mode 100644
index 0000000..aa1fcda
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts
@@ -0,0 +1,85 @@
+/*
+ * SAMSUNG XYREF5260 EVT0 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5260.dtsi"
+
+/ {
+	model = "SAMSUNG XYREF5260 EVT0 board based on EXYNOS5260";
+	compatible = "samsung,xyref5260", "samsung,exynos5260";
+
+	chosen {
+		bootargs = "console=ttySAC2,115200";
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5260-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	serial@12C00000 {
+		status = "okay";
+	};
+
+	serial@12C10000 {
+		status = "okay";
+	};
+
+	serial@12C20000 {
+		status = "okay";
+	};
+
+	serial@12860000 {
+		status = "okay";
+	};
+
+	dwmmc0@12140000 {
+		status = "okay";
+		num-slots = <1>;
+		broken-cd;
+		bypass-smu;
+		supports-highspeed;
+		supports-hs200-mode; /* 200 Mhz */
+		fifo-depth = <0x40>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <0 4>;
+		samsung,dw-mshc-ddr-timing = <0 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+		};
+	};
+
+	dwmmc2@12160000 {
+		status = "okay";
+		num-slots = <1>;
+		supports-highspeed;
+		fifo-depth = <0x40>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+			disable-wp;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
new file mode 100644
index 0000000..fcb8d4f
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -0,0 +1,315 @@
+/*
+ * SAMSUNG EXYNOS5260 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "skeleton.dtsi"
+#include "exynos5260-pinctrl.dtsi"
+
+#include <dt-bindings/clk/exynos5260-clk.h>
+
+/ {
+	compatible = "samsung,exynos5260";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+	};
+
+	chipid@10000000 {
+		compatible = "samsung,exynos4210-chipid";
+		reg = <0x10000000 0x100>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			cci-control-port = <&cci_control1>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			cci-control-port = <&cci_control1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			cci-control-port = <&cci_control0>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			cci-control-port = <&cci_control0>;
+		};
+		cpu@4 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			cci-control-port = <&cci_control0>;
+		};
+		cpu@5 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			cci-control-port = <&cci_control0>;
+		};
+	};
+
+	cmus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		cmu_top: clock-controller@0x10010000 {
+			compatible = "exynos5260-cmu-top",
+					"samsung,exynos5260-clock";
+			reg = <0x10010000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_peri: clock-controller@0x10200000 {
+			compatible = "exynos5260-cmu-peri", "samsung,exynos5260-clock";
+			reg = <0x10200000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_egl: clock-controller@0x10600000 {
+			compatible = "exynos5260-cmu-egl", "samsung,exynos5260-clock";
+			reg = <0x10600000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_kfc: clock-controller@0x10700000 {
+			compatible = "exynos5260-cmu-kfc", "samsung,exynos5260-clock";
+			reg = <0x10700000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_g2d: clock-controller@0x10A00000 {
+			compatible = "exynos5260-cmu-g2d", "samsung,exynos5260-clock";
+			reg = <0x10A00000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_mif: clock-controller@0x10CE0000 {
+			compatible = "exynos5260-cmu-mif", "samsung,exynos5260-clock";
+			reg = <0x10CE0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_mfc: clock-controller@0x11090000 {
+			compatible = "exynos5260-cmu-mfc", "samsung,exynos5260-clock";
+			reg = <0x11090000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_g3d: clock-controller@0x11830000 {
+			compatible = "exynos5260-cmu-g3d", "samsung,exynos5260-clock";
+			reg = <0x11830000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_fsys: clock-controller@0x122E0000 {
+			compatible = "exynos5260-cmu-fsys", "samsung,exynos5260-clock";
+			reg = <0x122E0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_aud: clock-controller@0x128C0000 {
+			compatible = "exynos5260-cmu-aud", "samsung,exynos5260-clock";
+			reg = <0x128C0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_isp: clock-controller@0x133C0000 {
+			compatible = "exynos5260-cmu-isp", "samsung,exynos5260-clock";
+			reg = <0x133C0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_gscl: clock-controller@0x13F00000 {
+			compatible = "exynos5260-cmu-gscl", "samsung,exynos5260-clock";
+			reg = <0x13F00000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_disp: clock-controller@0x14550000 {
+			compatible = "exynos5260-cmu-disp", "samsung,exynos5260-clock";
+			reg = <0x14550000 0x10000>;
+			#clock-cells = <1>;
+		};
+	};
+
+	gic:interrupt-controller@10481000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		interrupt-controller;
+		reg = <0x10481000 0x1000>,
+			<0x10482000 0x1000>,
+			<0x10484000 0x2000>,
+			<0x10486000 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	mct@100B0000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x100B0000 0xb00>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+				<4 0>, <5 0>, <6 0>, <7 0>,
+				<8 0>, <9 0>, <10 0>, <11 0>;
+		clocks = <&cmu_top FIN_PLL>, <&cmu_peri PERI_PCLK_MCT>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &gic 0 104 0>,
+					<0x1 0 &gic 0 105 0>,
+					<0x2 0 &gic 0 106 0>,
+					<0x3 0 &gic 0 107 0>,
+					<0x4 0 &gic 0 122 0>,
+					<0x5 0 &gic 0 123 0>,
+					<0x6 0 &gic 0 124 0>,
+					<0x7 0 &gic 0 125 0>,
+					<0x8 0 &gic 0 126 0>,
+					<0x9 0 &gic 0 127 0>,
+					<0xa 0 &gic 0 128 0>,
+					<0xb 0 &gic 0 129 0>;
+		};
+	};
+
+	cci@10F00000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x10F00000 0x1000>;
+		ranges = <0x0 0x10F00000 0x6000>;
+
+		cci_control0: slave-if@4000 {			/* Please check again */
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;			/* Please check again */
+		};
+
+		cci_control1: slave-if@5000 {			/* Please check again */
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;			/* Please check again */
+		};
+	};
+
+	pinctrl_0: pinctrl@11600000 {
+		compatible = "samsung,exynos5260-pinctrl";
+		reg = <0x11600000 0x1000>;
+		interrupts = <0 79 0>;				/* GPIO_RT */
+
+		wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupts = <0 32 0>;
+		};
+	};
+
+	pinctrl_1: pinctrl@12290000 {
+		compatible = "samsung,exynos5260-pinctrl";
+		reg = <0x12290000 0x1000>;			/* GPIO_FSYS */
+		interrupts = <0 157 0>;
+	};
+
+	pinctrl_2: pinctrl@128B0000 {
+		compatible = "samsung,exynos5260-pinctrl";
+		reg = <0x128B0000 0x1000>;
+		interrupts = <0 243 0>;				/* GPIO_AUD */
+	};
+
+	serial@12C00000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C00000 0x100>;
+		interrupts = <0 146 0>;
+		clocks = <&cmu_peri PERI_PCLK_UART0>, <&cmu_peri PERI_SCLK_UART0>;
+		clock-names = "uart", "clk_uart_baud0";
+		status = "disabled";
+	};
+
+	serial@12C10000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C10000 0x100>;
+		interrupts = <0 147 0>;
+		clocks = <&cmu_peri PERI_PCLK_UART1>, <&cmu_peri PERI_SCLK_UART1>;
+		clock-names = "uart", "clk_uart_baud0";
+		status = "disabled";
+	};
+
+	serial@12C20000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C20000 0x100>;
+		interrupts = <0 148 0>;
+		clocks = <&cmu_peri PERI_PCLK_UART2>, <&cmu_peri PERI_SCLK_UART2>;
+		clock-names = "uart", "clk_uart_baud0";
+		status = "disabled";
+	};
+
+	serial@12860000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12860000 0x100>;
+		interrupts = <0 145 0>;
+		clocks = <&cmu_aud AUD_PCLK_AUD_UART>, <&cmu_aud AUD_SCLK_AUD_UART>;
+		clock-names = "uart", "clk_uart_baud0";
+		status = "disabled";
+	};
+
+	dwmmc_0: dwmmc0@12140000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12140000 0x2000>;
+		interrupts = <0 156 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cmu_fsys FSYS_HCLK_MMC0>, <&cmu_top TOP_SCLK_MMC0>;
+		clock-names = "biu", "ciu";
+		status = "disabled";
+	};
+
+	dwmmc_1: dwmmc1@12150000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12150000 0x2000>;
+		interrupts = <0 158 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cmu_fsys FSYS_HCLK_MMC1>, <&cmu_top TOP_SCLK_MMC1>;
+		clock-names = "biu", "ciu";
+		status = "disabled";
+	};
+
+	dwmmc_2: dwmmc2@12160000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12160000 0x2000>;
+		interrupts = <0 159 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cmu_fsys FSYS_HCLK_MMC2>, <&cmu_top TOP_SCLK_MMC2>;
+		clock-names = "biu", "ciu";
+		status = "disabled";
+	};
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux