Re: [PATCH 1/3] RFC: AHCI: libahci is missing DMA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hey Tejun Heo,

On 04-12-13 13:32, Tejun Heo wrote:
On Wed, Dec 04, 2013 at 01:10:53PM +0100, oliver@xxxxxxxxxxx wrote:
From: Oliver Schinagl <oliver@xxxxxxxxxxx>

The Allwinner sunxi platforms have patched in the following to enable
DMA. This patch enables DMA controllers for the SUNXI Architecture.

Signed-off-by: Olliver Schinagl <oliver@xxxxxxxxxxx>
---
  drivers/ata/ahci.h    | 6 ++++++
  drivers/ata/libahci.c | 8 ++++++++
  2 files changed, 14 insertions(+)

diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 2289efdf..2bf2423 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -138,6 +138,7 @@ enum {
  	PORT_SCR_NTF		= 0x3c, /* SATA phy register: SNotification */
  	PORT_FBS		= 0x40, /* FIS-based Switching */
  	PORT_DEVSLP		= 0x44, /* device sleep */
+	PORT_DMA		= 0x70, /* direct memory access */
/* PORT_IRQ_{STAT,MASK} bits */
  	PORT_IRQ_COLD_PRES	= (1 << 31), /* cold presence detect */
@@ -209,6 +210,11 @@ enum {
  	PORT_DEVSLP_DSP		= (1 << 1),       /* DevSlp present */
  	PORT_DEVSLP_ADSE	= (1 << 0),       /* Aggressive DevSlp enable */
+ /* PORT_DMA bits */
+	PORT_DMA_SETUP_OFFSET	= 8, /* dma setup offset */
+	PORT_DMA_SETUP_MASK	= (0xff << PORT_DMA_SETUP_OFFSET),/* dma mask */
+	PORT_DMA_SETUP_INIT	= (0x44 << 0),
Ummm... this doesn't belong to ahci proper, right?
I have no idea why Allwinner added that and what it really does. We have no documentation, only code drops.

I had high hopes someone around here knows what it could mean and where it does belong.

+
  	/* hpriv->flags bits */
#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index c482f8c..d697a74 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -570,6 +570,14 @@ void ahci_start_engine(struct ata_port *ap)
  	void __iomem *port_mmio = ahci_port_base(ap);
  	u32 tmp;
+#ifdef CONFIG_ARCH_SUNXI
+	/* Setup DMA before DMA start */
+	tmp = readl(port_mmio + PORT_DMA);
+	tmp &= ~PORT_DMA_SETUP_MASK;
+	tmp |= PORT_DMA_SETUP_INIT << PORT_DMA_SETUP_OFFSET;
+	writel(tmp, port_mmio + PORT_DMA);
+#endif
If this is something platform device specific, wouldn't overriding
->port_start() which wraps around ahci_port_start() make more sense?
Again, I don't know, this is where Allwinner had put it. We don't even know who's IP they use. I'm happy to start experimenting moving this around a bit and will take your clue to figure out what you mean and if it could work.

Oliver

Thanks.


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux