The TI AEMIF driver registers are used to setup timings for each chip select. The same registers range is used to setup NAND settings. The AEMIF and NAND drivers not use the same registers in this range. In case with TI AEMIF driver, the memory address range is requested already by AEMIF, so we cannot request it twice, just ioremap. Acked-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx> Reviewed-by: Grygorii Strashko <grygorii.strashko@xxxxxx> Reviewed-by: Taras Kondratiuk <taras@xxxxxx> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx> --- drivers/mtd/nand/davinci_nand.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index f7b21b8..0cd4dbc 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -636,9 +636,11 @@ static int __init nand_davinci_probe(struct platform_device *pdev) if (IS_ERR(vaddr)) return PTR_ERR(vaddr); - base = devm_ioremap_resource(&pdev->dev, res2); - if (IS_ERR(base)) - return PTR_ERR(base); + base = devm_ioremap(&pdev->dev, res2->start, resource_size(res2)); + if (!base) { + dev_err(&pdev->dev, "ioremap failed for resource %pR\n", res2); + return -EADDRNOTAVAIL; + } info->dev = &pdev->dev; info->base = base; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html