Re: [PATCH v7 2/2] mmc: sdhci-msm: Initial support for MSM chipsets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 12/05/2013 12:27 PM, Mark Rutland wrote:
On Wed, Nov 06, 2013 at 03:56:45PM +0000, Georgi Djakov wrote:
This platform driver adds the initial support of Secure
Digital Host Controller Interface compliant controller
found in Qualcomm MSM chipsets.

Signed-off-by: Georgi Djakov <gdjakov@xxxxxxxxxx>
---
  drivers/mmc/host/Kconfig     |   13 +
  drivers/mmc/host/Makefile    |    1 +
  drivers/mmc/host/sdhci-msm.c |  651 ++++++++++++++++++++++++++++++++++++++++++
  3 files changed, 665 insertions(+)
  create mode 100644 drivers/mmc/host/sdhci-msm.c

[...]

+static int sdhci_msm_dt_parse_vreg_info(struct device *dev,
+                                       struct sdhci_msm_reg_data *vreg,
+                                       const char *vreg_name)
+{
+       int len;
+       const __be32 *prop;

Seeing raw property handling in drivers worries me. If there's a reason
to touch the raw DTB we should add helpers to do it rather than leaking
binary format issues into drivers.

+       char prop_name[MAX_PROP_SIZE];
+       struct device_node *np = dev->of_node;
+
+       snprintf(prop_name, MAX_PROP_SIZE, "%s-supply", vreg_name);
+       if (!of_parse_phandle(np, prop_name, 0)) {
+               dev_info(dev, "No vreg data found for %s\n", vreg_name);
+               return -EINVAL;
+       }
+
+       vreg->name = vreg_name;
+
+       snprintf(prop_name, MAX_PROP_SIZE, "qcom,%s-lpm-sup", vreg_name);
+       if (of_get_property(np, prop_name, NULL))
+               vreg->lpm_sup = true;
+
+       snprintf(prop_name, MAX_PROP_SIZE, "qcom,%s-voltage-level", vreg_name);
+       prop = of_get_property(np, prop_name, &len);
+       if (!prop || (len != (2 * sizeof(__be32)))) {
+               dev_warn(dev, "%s %s property\n",
+               prop ? "invalid format" : "no", prop_name);
+       } else {
+               vreg->low_vol_level = be32_to_cpup(&prop[0]);
+               vreg->high_vol_level = be32_to_cpup(&prop[1]);
+       }

You can use of_property_read_u32_array here.

+
+       snprintf(prop_name, MAX_PROP_SIZE, "qcom,%s-current-level", vreg_name);
+       prop = of_get_property(np, prop_name, &len);
+       if (!prop || (len != (2 * sizeof(__be32)))) {
+               dev_warn(dev, "%s %s property\n",
+                        prop ? "invalid format" : "no", prop_name);
+       } else {
+               vreg->lpm_uA = be32_to_cpup(&prop[0]);
+               vreg->hpm_uA = be32_to_cpup(&prop[1]);
+       }

Likewise.


I will clean this up use only of_property_read_u32_array() and of_property_read_bool() for DT parsing. Thanks!


[...]

+       /*
+        * CORE_SW_RST above may trigger power irq if previous status of PWRCTL
+        * was either BUS_ON or IO_HIGH_V. So before we enable the power irq
+        * interrupt in GIC (by registering the interrupt handler), we need to
+        * ensure that any pending power irq interrupt status is acknowledged
+        * otherwise power irq interrupt handler would be fired prematurely.
+        */
+       irq_status = readl_relaxed(msm_host->core_mem + CORE_PWRCTL_STATUS);
+       writel_relaxed(irq_status, (msm_host->core_mem + CORE_PWRCTL_CLEAR));
+       irq_ctl = readl_relaxed(msm_host->core_mem + CORE_PWRCTL_CTL);
+       if (irq_status & (CORE_PWRCTL_BUS_ON | CORE_PWRCTL_BUS_OFF))
+               irq_ctl |= CORE_PWRCTL_BUS_SUCCESS;
+       if (irq_status & (CORE_PWRCTL_IO_HIGH | CORE_PWRCTL_IO_LOW))
+               irq_ctl |= CORE_PWRCTL_IO_SUCCESS;
+       writel_relaxed(irq_ctl, (msm_host->core_mem + CORE_PWRCTL_CTL));
+       /*
+        * Ensure that above writes are propogated before interrupt enablement
+        * in GIC.
+        */
+       mb();

Does this guarantee that the device has finished responding to the write
and deasserted the interrupt line (i.e. does the device only acknowledge
the write once that is true)?


I am not sure that i understand your concern. The write to CORE_PWRCTL_CTL should acknowledge and deassert the interrupt.

Thanks,
Georgi
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux