Linux Kernel Newbies

Thread Index

Re: Including library in the Linux open source
- From: Greg KH <greg@xxxxxxxxx>
Including library in the Linux open source
- From: "Sahana B Adiga - ERS, HCL Tech" <sahana.b@xxxxxxx>
Fw: Automatic module insert in boot time
- From: Yacob Hassidim <yacobh@xxxxxxxxxxxx>
Re: CPU pinning
- From: Kernel Piddu <kernelpiddu@xxxxxxxxx>
Re: CPU pinning
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
generic-usb: probe of 0003:074D:3576.0002 failed with error -22
- From: Stanislav Stratu <stas.stratu@xxxxxxxxx>
Issue about setting interface flag on network device.
- From: 陳國成 <gcchen.org@xxxxxxxxx>
Re: Automatic module insert in boot time
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Automatic module insert in boot time
- From: Yacob Hassidim <yacobh@xxxxxxxxxxxx>
Re: Why do processes with higher priority to be allocated more timeslice?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Hooking exec system call
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Hooking exec system call
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Re: Hooking exec system call
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Hooking exec system call
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Re: Hooking exec system call
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: download 2.6.11 ver.
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: download 2.6.11 ver.
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Hooking exec system call
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Re: download 2.6.11 ver.
- From: esmaeil mirzaee <esmaeil.debian@xxxxxxxxx>
Re: download 2.6.11 ver.
- From: rohan puri <rohan.puri15@xxxxxxxxx>
download 2.6.11 ver.
- From: esmaeil mirzaee <esmaeil.debian@xxxxxxxxx>
Why do processes with higher priority to be allocated more timeslice?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: Debugging IP packet through Linux stack
- From: Jayapal Reddy <jayapalatiiit@xxxxxxxxx>
Re: What's wrong on this mmap() ?
- From: Gasparini Andrea <gaspa@xxxxxxxxxxx>
What's wrong on this mmap() ?
- From: Andrea Gasparini <gaspa@xxxxxxxxxxx>
Re: How to traverse or walk, the kernel's page table without mem_map?
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Hooking exec system call
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Hooking exec system call
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
How to traverse or walk, the kernel's page table without mem_map?
- From: Jeff Donner <jeffrey.donner@xxxxxxxxx>
Re: Hooking exec system call
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Hooking exec system call
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Re: Hooking exec system call
- From: Rajat Sharma <fs.rajat@xxxxxxxxx>
Re: Optimizing the performance of the Scheduler in the Kernel 3.0
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Optimizing the performance of the Scheduler in the Kernel 3.0
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Hooking exec system call
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: what does sys_sync() function do when suspend is called?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: question on memory mapping one page at a time
- From: Ezequiel García <elezegarcia@xxxxxxxxxxxx>
Optimizing the performance of the Scheduler in the Kernel 3.0
- From: Edward Alvarez <edwardalvarezm@xxxxxxxxx>
Re: Hooking exec system call
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Hooking exec system call
- From: Christophe Hauser <christophe.hauser@xxxxxxxxxx>
Re: Debugging IP packet through Linux stack
- From: amit mehta <gmate.amit@xxxxxxxxx>
Hooking exec system call
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Re: TCP_DELACK_MIN vs TCP_ATO_MIN
- From: rohan puri <rohan.puri15@xxxxxxxxx>
what does sys_sync() function do when suspend is called?
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Re: Debugging IP packet through Linux stack
- From: Abu Rasheda <rcpilot2010@xxxxxxxxx>
Re: Debugging IP packet through Linux stack
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
Debugging IP packet through Linux stack
- From: Abu Rasheda <rcpilot2010@xxxxxxxxx>
Re: question on memory mapping one page at a time
- From: Sri Ram Vemulpali <sri.ram.gmu06@xxxxxxxxx>
Re: Cannot read using USB Skeleton Driver
- From: Greg KH <greg@xxxxxxxxx>
Re: TCP_DELACK_MIN vs TCP_ATO_MIN
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
Re: TCP_DELACK_MIN vs TCP_ATO_MIN
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: load balancing scheduler on linux
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: looking for 3.0 source
- From: Greg KH <greg@xxxxxxxxx>
Re: Cannot read using USB Skeleton Driver
- From: Felix Varghese <felixv1986@xxxxxxxxx>
TCP_DELACK_MIN vs TCP_ATO_MIN
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
Re: load balancing scheduler on linux
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: load balancing scheduler on linux
- From: Murali N <nalajala.murali@xxxxxxxxx>
Re: looking for 3.0 source
- From: Pritam Bankar <pritambankar1988@xxxxxxxxx>
load balancing scheduler on linux
- From: Murali N <nalajala.murali@xxxxxxxxx>
Re: looking for 3.0 source
- From: Vishnupradeep <intermedia.vishnu@xxxxxxxxx>
Re: looking for 3.0 source
- From: Mirco Tischler <mt-ml@xxxxxx>
Re: File change notification along with user
- From: rohan puri <rohan.puri15@xxxxxxxxx>
File change notification along with user
- From: "V.Ravikumar" <ravikumar.vallabhu@xxxxxxxxx>
Re: question on memory mapping one page at a time
- From: rohan puri <rohan.puri15@xxxxxxxxx>
How to deal with two tasks with the same virtual time
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: looking for 3.0 source
- From: Jacky Lam <lamshuyin@xxxxxxxxx>
RE: question on memory mapping one page at a time
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
question on memory mapping one page at a time
- From: Sri Ram Vemulpali <sri.ram.gmu06@xxxxxxxxx>
Re: Why do the CFS chase fairness?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: Why do the CFS chase fairness?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
reading devices with input.h
- From: Volker Poplawski <volker@xxxxxxxxxxxx>
Re: 2.6.39 Kernel Changes for FileSystem, get_sb removed
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: do_gettiimeofday query
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: 2.6.39 Kernel Changes for FileSystem, get_sb removed
- From: kashish bhatia <koolest77@xxxxxxxxx>
Re: 2.6.39 Kernel Changes for FileSystem, get_sb removed
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: 2.6.39 Kernel Changes for FileSystem, get_sb removed
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Re: 2.6.39 Kernel Changes for FileSystem, get_sb removed
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Re: 2.6.39 Kernel Changes for FileSystem, get_sb removed
- From: rohan puri <rohan.puri15@xxxxxxxxx>
do_gettiimeofday query
- From: Lal <learner.kernel@xxxxxxxxx>
2.6.39 Kernel Changes for FileSystem, get_sb removed
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Re: Why do the CFS chase fairness?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: profiling functions called in interrupt context
- From: anish singh <anish198519851985@xxxxxxxxx>
Re: profiling functions called in interrupt context
- From: Nuno Martins <nuno.m.g.martins@xxxxxxxxx>
Re: profiling functions called in interrupt context
- From: Amit Nagal <helloin.amit@xxxxxxxxx>
Re: regarding disable of CONFIG_DEBUG_FS
- From: Amit Nagal <helloin.amit@xxxxxxxxx>
Re: profiling functions called in interrupt context
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: regarding disable of CONFIG_DEBUG_FS
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: profiling functions called in interrupt context
- From: Amit Nagal <helloin.amit@xxxxxxxxx>
Re: regarding disable of CONFIG_DEBUG_FS
- From: Amit Nagal <helloin.amit@xxxxxxxxx>
Re: profiling functions called in interrupt context
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: regarding disable of CONFIG_DEBUG_FS
- From: rohan puri <rohan.puri15@xxxxxxxxx>
profiling functions called in interrupt context
- From: Amit Nagal <helloin.amit@xxxxxxxxx>
regarding disable of CONFIG_DEBUG_FS
- From: Amit Nagal <helloin.amit@xxxxxxxxx>
Re: Cannot read using USB Skeleton Driver
- From: Felix Varghese <felixv1986@xxxxxxxxx>
Re: Why do the CFS chase fairness?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: kernel crash dump analysis using crash utility
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Why do the CFS chase fairness?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: Why do the CFS chase fairness?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Why do the CFS chase fairness?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: Cannot read using USB Skeleton Driver
- From: Greg KH <greg@xxxxxxxxx>
Re: Cannot read using USB Skeleton Driver
- From: Felix Varghese <felixv1986@xxxxxxxxx>
Re: kernel crash dump analysis using crash utility
- From: amit mehta <gmate.amit@xxxxxxxxx>
Re: Cannot read using USB Skeleton Driver
- From: Greg KH <greg@xxxxxxxxx>
Re: how to use hashmap in kernel module?
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
kernel crash dump analysis using crash utility
- From: amit mehta <gmate.amit@xxxxxxxxx>
how to use hashmap in kernel module?
- From: Jon Zhou <Jon.Zhou@xxxxxxxx>
Re: Why do the CFS chase fairness?
- From: Michael Blizek <michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Re: Cannot read using USB Skeleton Driver
- From: Felix Varghese <felixv1986@xxxxxxxxx>
Re: Regarding mmap synchronization.
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Regarding mmap synchronization.
- From: mindentropy <mindentropy@xxxxxxxxx>
Re: Regarding mmap synchronization.
- From: Dave Hylands <dhylands@xxxxxxxxx>
Regarding mmap synchronization.
- From: mindentropy <mindentropy@xxxxxxxxx>
Re: Why do the CFS chase fairness?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Why do the CFS chase fairness?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: Kernel
- From: DiP <aspamkiller@xxxxxxxxx>
Kernel
- From: Jestin Joy <jestinjoy@xxxxxxxxxxx>
Re: thread_info address calculation
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Cannot read using USB Skeleton Driver
- From: Greg KH <greg@xxxxxxxxx>
Re: Project on USB OTG
- From: Christopher Harvey <chris@xxxxxxxxxxxxxxxx>
using the kmsg_dumper.
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Re: thread_info address calculation
- From: Vijay Chauhan <kernel.vijay@xxxxxxxxx>
Re: thread_info address calculation
- From: Denis Kirjanov <kirjanov@xxxxxxxxx>
thread_info address calculation
- From: Vijay Chauhan <kernel.vijay@xxxxxxxxx>
Re: Cannot read using USB Skeleton Driver
- From: Felix Varghese <felixv1986@xxxxxxxxx>
Re: Cannot read using USB Skeleton Driver
- From: Greg KH <greg@xxxxxxxxx>
No human readable MCE decoding support on this CPU type
- From: Jon Zhou <Jon.Zhou@xxxxxxxx>
Project on USB OTG
- From: madav maddy <maddy.mdv007@xxxxxxxxx>
Re: the cost of vmalloc
- From: Michael Blizek <michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Re: How to create some threads running tha same function
- From: Kaustubh Ashtekar <ksashtekar@xxxxxxxxx>
Re: Code Generator
- From: Jim Cromie <jim.cromie@xxxxxxxxx>
Re: the cost of vmalloc
- From: Zheng Da <zhengda1936@xxxxxxxxx>
CPU pinning.
- From: Kernel Piddu <kernelpiddu@xxxxxxxxx>
Re: Understanding pipes and blocking calls
- From: Sri Ram Vemulpali <sri.ram.gmu06@xxxxxxxxx>
Re: How to create some threads running tha same function
- From: Kristof Provost <kristof@xxxxxxxxxx>
How to create some threads running tha same function
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: CPU usage accounting
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Cannot read using USB Skeleton Driver
- From: Felix Varghese <felixv1986@xxxxxxxxx>
Re: CPU usage accounting
- From: Vimal <j.vimal@xxxxxxxxx>
writing on mmap() ?
- From: Andrea Gasparini <gaspa@xxxxxxxxxxx>
Re: looking for 3.0 source
- From: Mirco Tischler <mt-ml@xxxxxx>
looking for 3.0 source
- From: "Littlefield, Tyler" <tyler@xxxxxxxxxxxxx>
Re: CPU usage accounting
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
CPU usage accounting
- From: Vimal <j.vimal@xxxxxxxxx>
perf hardware events
- From: Andreas Leppert <wudmx@xxxxxx>
Re: error : no symbol version for "function"
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: error : no symbol version for "function"
- From: Pelle Windestam <pelle@xxxxxxxxxxxx>
Re: Watchdog timer expired, but panic logs not seen
- From: Kaustubh Ashtekar <ksashtekar@xxxxxxxxx>
Re: error : no symbol version for "function"
- From: Jorgyano Bruno <jorgyano@xxxxxxxxx>
Re: Code Generator
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: Watchdog timer expired, but panic logs not seen
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Code Generator
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: error : no symbol version for "function"
- From: kashish bhatia <koolest77@xxxxxxxxx>
Re: error : no symbol version for "function"
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Paging of Kernel Memory
- From: Rik van Riel <riel@xxxxxxxxxxx>
Re: error : no symbol version for "function"
- From: Jorgyano Bruno <jorgyano@xxxxxxxxx>
Enabling USB OTG
- From: madav maddy <maddy.mdv007@xxxxxxxxx>
Re: kthread Working
- From: Rajat Sharma <fs.rajat@xxxxxxxxx>
error : no symbol version for "function"
- From: kashish bhatia <koolest77@xxxxxxxxx>
Re: maintenance time and git error
- From: Adam Lee <adam8157@xxxxxxxxx>
Re: maintenance time and git error
- From: esmaeil mirzaee <esmaeil.debian@xxxxxxxxx>
Re: maintenance time and git error
- From: Adam Lee <adam8157@xxxxxxxxx>
maintenance time and git error
- From: esmaeil mirzaee <esmaeil.debian@xxxxxxxxx>
Re: Watchdog timer expired, but panic logs not seen
- From: Kaustubh Ashtekar <ksashtekar@xxxxxxxxx>
Code Generator
- From: mosta <mosta.me@xxxxxxxxxxxxxx>
userspace address to bus address
- From: "Florian Bauer" <florian.bauer@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
kthread Working
- From: Gaurav Mahajan <gauravmahajan2007@xxxxxxxxx>
Re: the cost of vmalloc
- From: Michael Blizek <michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Re: the cost of vmalloc
- From: Zheng Da <zhengda1936@xxxxxxxxx>
Re: the cost of vmalloc
- From: Michael Blizek <michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Re: the cost of vmalloc
- From: Zheng Da <zhengda1936@xxxxxxxxx>
Understanding pipes and blocking calls
- From: Kristian Evensen <kristian.evensen@xxxxxxxxx>
Re: the cost of vmalloc
- From: Michael Blizek <michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Re: compile kernel
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: the cost of vmalloc
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: how diff between hardlink trees works?
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: how diff between hardlink trees works?
- From: Kai Meyer <kai@xxxxxxxxxx>
the cost of vmalloc
- From: Zheng Da <zhengda1936@xxxxxxxxx>
Re: how diff between hardlink trees works?
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: how diff between hardlink trees works?
- From: Kai Meyer <kai@xxxxxxxxxx>
how diff between hardlink trees works?
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Watchdog timer expired, but panic logs not seen
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Re: compile kernel
- From: esmaeil mirzaee <esmaeil.debian@xxxxxxxxx>
Re: pci_request_regions erring out
- From: Shakthi Kannan <shakthimaan@xxxxxxxxx>
compile kernel
- From: esmaeil mirzaee <esmaeil.debian@xxxxxxxxx>
pci_request_regions erring out
- From: Giriprasad Deviprasad <g_pr21@xxxxxxxx>
Re: adding preprocessor defines in module makefiles
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Why the PF_SUPERPRIV flag is cleared?
- From: rohan puri <rohan.puri15@xxxxxxxxx>
2 mods with same PCI-ID table, one installs, other fails modprobe
- From: Jim Cromie <jim.cromie@xxxxxxxxx>
Filesystem allocation bitmap
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: Query about custom fedora build process
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: adding preprocessor defines in module makefiles
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Why the PF_SUPERPRIV flag is cleared?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
adding preprocessor defines in module makefiles
- From: Christopher Harvey <chris@xxxxxxxxxxxxxxxx>
Re: Doubt regarding asmlinkage
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Doubt regarding asmlinkage
- From: Pei Lin <telent997@xxxxxxxxx>
Re: Why the PF_SUPERPRIV flag is cleared?
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Doubt regarding asmlinkage
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Paging of Kernel Memory
- From: Asutosh Das <das.asutosh@xxxxxxxxx>
Why the PF_SUPERPRIV flag is cleared?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: Doubt regarding asmlinkage
- From: Pei Lin <telent997@xxxxxxxxx>
Re: Doubt regarding asmlinkage
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Doubt fork system call
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Doubt regarding asmlinkage
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Doubt fork system call
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Doubt fork system call
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Doubt regarding asmlinkage
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Doubt regarding asmlinkage
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Query about custom fedora build process
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Doubt fork system call
- From: Darshan Ghumare <darshan.ghumare@xxxxxxxxx>
Doubt regarding asmlinkage
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Doubt fork system call
- From: rohan puri <rohan.puri15@xxxxxxxxx>
How to identify the SD card in Linux.
- From: varun Yadav <varunyadav83@xxxxxxxxx>
Re: Paging of Kernel Memory
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Paging of Kernel Memory
- From: ashish anand <ashishanand26cs@xxxxxxxxx>
Re: project on linux kernel
- From: Greg KH <greg@xxxxxxxxx>
Re: project on linux kernel
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: project on linux kernel
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
freeze_bdev
- From: Mike Gibson <mike.gibson@xxxxxxxxxxxxxxxx>
Re: analysis of kernel panic logs.
- From: anish singh <anish198519851985@xxxxxxxxx>
Re: analysis of kernel panic logs.
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Paging of Kernel Memory
- From: Christopher Harvey <chris@xxxxxxxxxxxxxxxx>
Paging of Kernel Memory
- From: Vijay Chauhan <kernel.vijay@xxxxxxxxx>
How to identify Connected USB Storage device (Harddisk, flash Memory or SSD)
- From: mani <manishrma@xxxxxxxxx>
Re: Finding physical and logical core number in a kernel module ?
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
CRC calculation in Module.symvers
- From: Shakthi Kannan <shakthimaan@xxxxxxxxx>
Re: Re: Regarding threaded irq and normal irq
- From: anish singh <anish198519851985@xxxxxxxxx>
Re: Regarding threaded irq and normal irq
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: Finding physical and logical core number in a kernel module ?
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
Finding physical and logical core number in a kernel module ?
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Re: Regarding threaded irq and normal irq
- From: anish singh <anish198519851985@xxxxxxxxx>
Re: Re: Regarding threaded irq and normal irq
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Uniquely Identify Machine
- From: Gaurav Mahajan <gauravmahajan2007@xxxxxxxxx>
Re: Parallel IO port conflict (driver problem)
- From: Greg KH <greg@xxxxxxxxx>
Parallel IO port conflict (driver problem)
- From: Shenli Zhu <zhushenli2@xxxxxxxxx>
Re: Regarding threaded irq and normal irq
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Re: Regarding threaded irq and normal irq
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: Uniquely Identify Machine
- From: Greg KH <greg@xxxxxxxxx>
Re: Uniquely Identify Machine
- From: ajit mote <mail2blackmen@xxxxxxxxx>
Re: analysis of kernel panic logs.
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Uniquely Identify Machine
- From: Gaurav Mahajan <gauravmahajan2007@xxxxxxxxx>
Re: analysis of kernel panic logs.
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: analysis of kernel panic logs.
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Can we put the pages allocated by alloc_pages in the page cache?
- From: Da Zheng <zhengda1936@xxxxxxxxx>
Re: kernel 3.0.4 installation failed
- From: Vishnupradeep <intermedia.vishnu@xxxxxxxxx>
Re: kernel 3.0.4 installation failed
- From: Prashant Shah <pshah.mumbai@xxxxxxxxx>
Re: kernel 3.0.4 installation failed
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
kernel 3.0.4 installation failed
- From: Vishnupradeep <intermedia.vishnu@xxxxxxxxx>
Re: Re: How make modprobe find my kernel module?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: How make modprobe find my kernel module?
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: analysis of kernel panic logs.
- From: Dave Hylands <dhylands@xxxxxxxxx>
How make modprobe find my kernel module?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: analysis of kernel panic logs.
- From: keshav yadav <keshav.yadav2005@xxxxxxxxx>
Re: analysis of kernel panic logs.
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Re: analysis of kernel panic logs.
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
analysis of kernel panic logs.
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Regarding threaded irq and normal irq
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Re: Compile a Single Kernel Module
- From: "Leonid V. Fedorenchik" <leonidsbox@xxxxxxxxx>
Re: Kernel Lock Debugging
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: how to configure printk() in 2.6 kernel
- From: Mirco Tischler <mt-ml@xxxxxx>
Re: Kernel Lock Debugging
- From: Venkatram Tummala <venkatram867@xxxxxxxxx>
Re: how to configure printk() in 2.6 kernel
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Kernel Lock Debugging
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
Kernel Lock Debugging
- From: Venkatram Tummala <venkatram867@xxxxxxxxx>
Compile a Single Kernel Module
- From: Nestor Waldyd <nestor.alvarez@xxxxxxxxxxxxxxx>
RE: how to configure printk() in 2.6 kernel
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: how to configure printk() in 2.6 kernel
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
pci_set_consistent_dma_mask explanation
- From: Christopher Harvey <chris@xxxxxxxxxxxxxxxx>
Re: BUG: sleeping function called from invalid context
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Re: ptrace() behaviour when doing PTRACE_KILL
- From: Pablo Antonio <pabloa@xxxxxxxxx>
Re: how to configure printk() in 2.6 kernel
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: BUG: sleeping function called from invalid context
- From: Dave Hylands <dhylands@xxxxxxxxx>
BUG: sleeping function called from invalid context
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Re: how to configure printk() in 2.6 kernel
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Unknown symbol usb_register_driver
- From: Prajosh Premdas <premdas.prajosh@xxxxxxxxx>
Re: how to configure printk() in 2.6 kernel
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Unknown symbol usb_register_driver
- From: StephanT <stman937-linewbie@xxxxxxxxx>
Re: how to configure printk() in 2.6 kernel
- From: "Ramesh.P" <rameshpa@xxxxxxxxx>
Re: Unknown symbol usb_register_driver
- From: Greg KH <greg@xxxxxxxxx>
RE: Unknown symbol usb_register_driver
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: Unknown symbol usb_register_driver
- From: Greg KH <greg@xxxxxxxxx>
Unknown symbol usb_register_driver
- From: Prajosh Premdas <premdas.prajosh@xxxxxxxxx>
how to configure printk() in 2.6 kernel
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: ptrace() behaviour when doing PTRACE_KILL
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Can not free irq 0
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: question about oops and panic
- From: Christopher Harvey <chris@xxxxxxxxxxxxxxxx>
Re: question about oops and panic
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Re: question about oops and panic
- From: anish singh <anish198519851985@xxxxxxxxx>
Re: question about oops and panic
- From: Stratos Psomadakis <s.psomadakis@xxxxxxxxx>
Re: question about oops and panic
- From: Mandeep Sandhu <mandeepsandhu.chd@xxxxxxxxx>
Re: question about oops and panic
- From: anish singh <anish198519851985@xxxxxxxxx>
BlueTooth: HCI: Error message
- From: Pradeep Kumar <pradeep4uiiita@xxxxxxxxx>
question about oops and panic
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: Can not free irq 0
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
ptrace() behaviour when doing PTRACE_KILL
- From: Pablo Antonio <pabloa@xxxxxxxxx>
Re: understanding GPIO registers
- From: vichy <vichy.kuo@xxxxxxxxx>
Re: understanding GPIO registers
- From: "OrazioPirataDelloSpazio (Lorenzo)" <ziducaixao@xxxxxxxxxxxxx>
Re: Can not free irq 0
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: understanding GPIO registers
- From: vichy <vichy.kuo@xxxxxxxxx>
Re: Can not free irq 0
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Can not free irq 0
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: Can not free irq 0
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Can not free irq 0
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: I need suggestions for a practical work related with Kernel Development
- From: amit mehta <gmate.amit@xxxxxxxxx>
Need help with the Uncompressed kernel be overriden after decompress_kernel called?
- From: "jiangtao.jit" <jiangtao.jit@xxxxxxxxx>
Re: The core in which NAPI is using
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: I need suggestions for a practical work related with Kernel Development
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
(struct spi_transfer)->rx_buf == (struct spi_transfer)->tx_buf?
- From: Arvid Brodin <arvid.brodin@xxxxxxxx>
RE: I need suggestions for a practical work related with KernelDevelopment
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
RE: I need suggestions for a practical work related with KernelDevelopment
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
I need suggestions for a practical work related with Kernel Development
- From: Facundo Viale <facundo.m.viale@xxxxxxxxx>
The core in which NAPI is using
- From: "J.Hwan Kim" <frog1120@xxxxxxxxx>
Re: How to understand 'make oldconfig'?
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Soft interrupt in multi-core environment
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
RE: How to understand 'make oldconfig'?
- From: Adrian Cornish <adrianc@xxxxxxx>
Soft interrupt in multi-core environment
- From: "J.Hwan Kim" <frog1120@xxxxxxxxx>
Re: How to understand 'make oldconfig'?
- From: "Leonid V. Fedorenchik" <leonidsbox@xxxxxxxxx>
Re: How to understand 'make oldconfig'?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: How to distribute IRQs to all cores
- From: "J.Hwan Kim" <frog1120@xxxxxxxxx>
understanding GPIO registers
- From: "OrazioPirataDelloSpazio (Lorenzo)" <ziducaixao@xxxxxxxxxxxxx>
Re: How to distribute IRQs to all cores
- From: Akash <email2akashjain@xxxxxxxxx>
Re: How to make the kernel support NTFS?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: How to understand 'make oldconfig'?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: How to make the kernel support NTFS?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
How to understand 'make oldconfig'?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
How to distribute IRQs to all cores
- From: "J.Hwan Kim" <frog1120@xxxxxxxxx>
Re: Purpose of using __be16 inside a data structure?
- From: 陳國成 <gcchen.org@xxxxxxxxx>
Re: How to make the kernel support NTFS?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: Error Building Fedora Kernel - problem in applying patch
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Error Building Fedora Kernel - problem in applying patch
- From: Anuz Pratap Singh Tomar <chambilkethakur@xxxxxxxxx>
Error Building Fedora Kernel - problem in applying patch
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Compile the driver against kernel source requires a build kernel ??
- From: Anuz Pratap Singh Tomar <chambilkethakur@xxxxxxxxx>
Question on __pv_stub
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Compile the driver against kernel source requires a build kernel ??
- From: Sraddha <dhakatevaishali@xxxxxxxxx>
Re: How to make the kernel support NTFS?
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: How to make the kernel support NTFS?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: How to make the kernel support NTFS?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: What does drop_caches do?
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: startingKernelProgramming
- From: Metin KAYA <kayameti@xxxxxxxxx>
startingKernelProgramming
- From: Srinidhi Rao <srinidhi.rx@xxxxxxxxx>
Re: where is the definition of irq_desc array?
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: What does drop_caches do?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Purpose of using __be16 inside a data structure?
- From: Adam Lee <adam8157@xxxxxxxxx>
Re: TCP - RST flag
- From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
Re: TCP - RST flag
- From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
Re: Headset driver detection problem during bootup
- From: anish singh <anish198519851985@xxxxxxxxx>
Re: Is it needed to reinstall custom kernel every time, after rebuilding?
- From: Jesper Juhl <jj@xxxxxxxxxxxxx>
Purpose of using __be16 inside a data structure?
- From: 陳國成 <gcchen.org@xxxxxxxxx>
Re: Compile kernel for various times and problem of too long time consuming
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
Re: Compile kernel for various times and problem of too long time consuming
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
SYSLOG_ACTION_READ_ALL question
- From: William Douglas <william.r.douglas@xxxxxxxxx>
Re: SRIO maintenance read hangs (mpc8548)
- From: tony zhou <xp_zhou84@xxxxxxx>
Re: How can install gcc-3.2.tar.bz
- From: Ian Lance Taylor <iant@xxxxxxxxxx>
Re: How can patch a bug
- From: Ian Lance Taylor <iant@xxxxxxxxxx>
Re: How can patch a bug
- From: Ian Lance Taylor <iant@xxxxxxxxxx>
[net] Hacking the wholism of GNU/Linux net*
- From: Shawn <citypw@xxxxxxxxx>
What does drop_caches do?
- From: Prateek Sharma <prateeks@xxxxxxxxxxxxxx>
Compiling enough of the kernel to get symbols for EXTMODs, but no more
- From: David Wuertele <dave+gmane@xxxxxxxxxxxx>
Bond, round robin mis-configuration.
- From: Eduard Sinelnikov <eduard.sinelnikov@xxxxxxxxx>
Re: failed to do make menuconfig
- From: "Srivatsa S. Bhat" <srivatsa.bhat@xxxxxxxxxxxxxxxxxx>
Re: Headset driver detection problem during bootup
- From: Takashi Iwai <tiwai@xxxxxxx>
Re: Compile kernel for various times and problem of too long time consuming
- From: Stratos Psomadakis <psomas@xxxxxxxxxx>
Re: question about staging tree branches
- From: Greg KH <greg@xxxxxxxxx>
Re: TCP - RST flag
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
Re: TCP - RST flag
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
TCP - RST flag
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
Re: Difference between logical and physical cpu hotplug
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
where is the definition of irq_desc array?
- From: "LovelyLich" <lovelylich@xxxxxxxxx>
Re: How to make the kernel support NTFS?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: How to make the kernel support NTFS?
- From: Prashant Shah <pshah.mumbai@xxxxxxxxx>
How to make the kernel support NTFS?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: how to compile additional module?
- From: loody <miloody@xxxxxxxxx>
Re: how to compile additional module?
- From: Mirco Tischler <mt-ml@xxxxxx>
Re: how to compile additional module?
- From: loody <miloody@xxxxxxxxx>
Re: how to compile additional module?
- From: Mirco Tischler <mt-ml@xxxxxx>
Re: how to compile additional module?
- From: loody <miloody@xxxxxxxxx>
how to compile additional module?
- From: loody <miloody@xxxxxxxxx>
Re: Running code on an isolated core
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
Re: [ Kernel not booting up ]
- From: ashish raste <rasteashish@xxxxxxxxx>
Re: [ Kernel not booting up ]
- From: ashish raste <rasteashish@xxxxxxxxx>
Re: Difference between logical and physical cpu hotplug
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Running code on an isolated core
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: question in request_threaded_irq
- From: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>
Re: Running code on an isolated core
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
Re: Can i allocate 4GB virtual addresses (more than a certain limit) using vmalloc?
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: Running code on an isolated core
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Can i allocate 4GB virtual addresses (more than a certain limit) using vmalloc?
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Re: [ Kernel not booting up ]
- From: Prashant Shah <pshah.mumbai@xxxxxxxxx>
How to find out if the NIC supports SR-IOV
- From: C K Kashyap <ckkashyap@xxxxxxxxx>
Re: How to get the physical address of memory allocated by kmalloc
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
How to get the physical address of memory allocated by kmalloc
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Re: Difference between logical and physical cpu hotplug
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: [ Kernel not booting up ]
- From: Kaustubh Ashtekar <ksashtekar@xxxxxxxxx>
Re: [ Kernel not booting up ]
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
Re: [ Kernel not booting up ]
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: Reading debug/tracing info
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
Re: Reading debug/tracing info
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
Re: [ Kernel not booting up ]
- From: ashish raste <rasteashish@xxxxxxxxx>
Re: getting started
- From: Julie Sullivan <kernelmail.jms@xxxxxxxxx>
Re: Headset driver detection problem during bootup
- From: anish singh <anish198519851985@xxxxxxxxx>
Re: [ Kernel not booting up ]
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: [ Kernel not booting up ]
- From: Anuz Pratap Singh Tomar <chambilkethakur@xxxxxxxxx>
Re: Reading debug/tracing info
- From: esmaeil mirzaee <esmaeil.debian@xxxxxxxxx>
[ Kernel not booting up ]
- From: ashish raste <rasteashish@xxxxxxxxx>
Re: Reading debug/tracing info
- From: Prateek Sharma <prateek3.14@xxxxxxxxx>
Re: books and pointers...
- From: Anuz Pratap Singh Tomar <chambilkethakur@xxxxxxxxx>
Reading debug/tracing info
- From: Prateek Sharma <prateek3.14@xxxxxxxxx>
books and pointers...
- From: Srinidhi Rao <srinidhi.rx@xxxxxxxxx>
Re: Port Linux multiprocessor support
- From: Greg KH <greg@xxxxxxxxx>
Re: getting started
- From: esmaeil mirzaee <esmaeil.debian@xxxxxxxxx>
Re: How to measure the performance hit of changes in kernel code
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
How to measure the performance hit of changes in kernel code
- From: john k <johnxsec@xxxxxxxxx>
Re: multiple dependent out-of-tree modules
- From: Jorgyano Bruno <jorgyano@xxxxxxxxx>
Re: Difference between logical and physical cpu hotplug
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: ohci_hcd leak ed
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: getting started
- From: Julie Sullivan <kernelmail.jms@xxxxxxxxx>
Re: getting started
- From: Julie Sullivan <kernelmail.jms@xxxxxxxxx>
Re: Port Linux multiprocessor support
- From: Giorgis Georgakoudis <ggeorgakoudis@xxxxxxxxx>
Re: ohci_hcd leak ed
- From: DiP <aspamkiller@xxxxxxxxx>
Re: ohci_hcd leak ed
- From: DiP <aspamkiller@xxxxxxxxx>
Re: ohci_hcd leak ed
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
RE: Is it possible to relocate a kernel page in physical memory?
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: Is it possible to relocate a kernel page in physical memory?
- From: Arvid Brodin <arvid.brodin@xxxxxxxx>
RE: Is it possible to relocate a kernel page in physical memory?
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Is it possible to relocate a kernel page in physical memory?
- From: Arvid Brodin <arvid.brodin@xxxxxxxx>
Re: Port Linux multiprocessor support
- From: Greg KH <greg@xxxxxxxxx>
Port Linux multiprocessor support
- From: Giorgis Georgakoudis <ggeorgakoudis@xxxxxxxxx>
Re: multiple dependent out-of-tree modules
- From: Greg KH <greg@xxxxxxxxx>
Re: getting started
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
Re: multiple dependent out-of-tree modules
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
multiple dependent out-of-tree modules
- From: Jorgyano Bruno <jorgyano@xxxxxxxxx>
getting started
- From: "Littlefield, Tyler" <tyler@xxxxxxxxxxxxx>
Re: Is it needed to reinstall custom kernel every time, after rebuilding?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: ohci_hcd leak ed
- From: DiP <aspamkiller@xxxxxxxxx>
ohci_hcd leak ed
- From: DiP <aspamkiller@xxxxxxxxx>
Proc fs Guide
- From: Ezequiel García <elezegarcia@xxxxxxxxxxxx>
Re: Difference between logical and physical cpu hotplug
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: Difference between logical and physical cpu hotplug
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: PCI IO memory resource allocation
- From: Erlon Cruz <sombrafam@xxxxxxxxx>
Re: Difference between logical and physical cpu hotplug
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Is it needed to reinstall custom kernel every time, after rebuilding?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Is it needed to reinstall custom kernel every time, after rebuilding?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Is it needed to reinstall custom kernel every time, after rebuilding?
- From: Amirali Shambayati <amirali.shambayati@xxxxxxxxx>
Re: How to reinstall modified custom kernel?
- From: "Littlefield, Tyler" <tyler@xxxxxxxxxxxxx>
Is it needed to reinstall custom kernel every time, after rebuilding?
- From: Amirali Shambayati <amirali.shambayati@xxxxxxxxx>
How to reinstall modified custom kernel?
- From: Amirali Shambayati <amirali.shambayati@xxxxxxxxx>
Re: Difference between logical and physical cpu hotplug
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Query about the realtime processes scheduling.
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: PCI IO memory resource allocation
- From: "J.Hwan.Kim" <j.hwan.kim99@xxxxxxxxx>
Re: Difference between logical and physical cpu hotplug
- From: srivatsa bhat <bhat.srivatsa@xxxxxxxxx>
Re: Difference between logical and physical cpu hotplug
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: how to enable linux box to dump crash image on local disk
- From: amit mehta <gmate.amit@xxxxxxxxx>
Re: how to enable linux box to dump crash image on local disk
- From: "Leonid V. Fedorenchik" <leonidsbox@xxxxxxxxx>
Re: Query about the realtime processes scheduling.
- From: nilesh <nilesh.tayade@xxxxxxxxxxxx>
Query about the realtime processes scheduling.
- From: nilesh <nilesh.tayade@xxxxxxxxxxxx>
Re: PCI IO memory resource allocation
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
Re: Running code on an isolated core
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
Running code on an isolated core
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Difference between logical and physical cpu hotplug
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Thunderbolt and Mac Book Pro
- From: Greg KH <greg@xxxxxxxxx>
Re: how to enable linux box to dump crash image on local disk
- From: sumeet gandhare <sumeetgandhare@xxxxxxxxx>
Re: how to enable linux box to dump crash image on local disk
- From: amit mehta <gmate.amit@xxxxxxxxx>
PCI IO memory resource allocation
- From: "J.Hwan Kim" <frog1120@xxxxxxxxx>
Re: how to enable linux box to dump crash image on local disk
- From: sumeet gandhare <sumeetgandhare@xxxxxxxxx>
Re: how to enable linux box to dump crash image on local disk
- From: amit mehta <gmate.amit@xxxxxxxxx>
how to enable linux box to dump crash image on local disk
- From: amit mehta <gmate.amit@xxxxxxxxx>
Re: Difference between logical and physical cpu hotplug
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Difference between logical and physical cpu hotplug
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
Difference between logical and physical cpu hotplug
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Thunderbolt and Mac Book Pro
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: Thunderbolt and Mac Book Pro
- From: Greg KH <greg@xxxxxxxxx>
Thunderbolt and Mac Book Pro
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
export atomic64_t into /proc/sys/
- From: "LovelyLich" <lovelylich@xxxxxxxxx>
Re: question in request_threaded_irq
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
Re: question in request_threaded_irq
- From: radhika bhaskaran <radhibhas@xxxxxxxxx>
Re: Dev Environment?
- From: Christophe Hauser <christophe.hauser@xxxxxxxxxx>
Re: Dev Environment?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Dev Environment?
- From: Daniel Hilst Selli <danielhilst@xxxxxxxxx>
Re: Tracing file size changes
- From: Christophe Hauser <christophe.hauser@xxxxxxxxxx>
Re: Dev Environment?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Purpose of using __be16 inside a data structure?
- From: Michael Blizek <michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Re: Dev Environment?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: question in request_threaded_irq
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
Purpose of using __be16 inside a data structure?
- From: 陳國成 <gcchen.org@xxxxxxxxx>
question in request_threaded_irq
- From: radhika bhaskaran <radhibhas@xxxxxxxxx>
Dev Environment?
- From: Daniel Hilst Selli <danielhilst@xxxxxxxxx>
Re: Tracing file size changes
- From: Chris <lists@xxxxxxxxxx>
Re: Need help in understanding sysfs
- From: Greg KH <greg@xxxxxxxxx>
Re: Need help in understanding sysfs
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Tracing file size changes
- From: Chris <lists@xxxxxxxxxx>
Re: about gcc-3.4.6
- From: Bernd Petrovitsch <bernd@xxxxxxxxxxxxxxxxxxx>
Re: SYSLOG_ACTION_READ_ALL question
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: about gcc-3.4.6
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
Re: SYSLOG_ACTION_READ_ALL question
- From: william douglas <william.r.douglas@xxxxxxxxx>
RE: SYSLOG_ACTION_READ_ALL question
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
SYSLOG_ACTION_READ_ALL question
- From: william douglas <william.r.douglas@xxxxxxxxx>
Re: What's the value of %cs before jump in pm32 on booting?
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: What's the value of %cs before jump in pm32 on booting?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
What's the value of %cs before jump in pm32 on booting?
- From: "jiangtao.jit" <jiangtao.jit@xxxxxxxxx>
Re: Tracing file size changes
- From: "Vaughn Clinton" <vclinton@xxxxxxx>
Re: Tracing file size changes
- From: Adam Lee <adam8157@xxxxxxxxx>
Tracing file size changes
- From: Chris <lists@xxxxxxxxxx>
Re: Need help in understanding sysfs
- From: Greg KH <greg@xxxxxxxxx>
Re: Need help in understanding sysfs
- From: Anuz Pratap Singh Tomar <chambilkethakur@xxxxxxxxx>
Re: Need help in understanding sysfs
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
RE: Need help in understanding sysfs
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: Need help in understanding sysfs
- From: Greg KH <greg@xxxxxxxxx>
Re: Need help in understanding sysfs
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Need help in understanding sysfs
- From: Greg KH <greg@xxxxxxxxx>
Need help in understanding sysfs
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Mapped more than Cached in /proc/meminfo
- From: "=/_00/\\/\\" <z0032oom@xxxxxxxxx>
Re: difference between io_schedule() and schedule()
- From: Rajat Sharma <fs.rajat@xxxxxxxxx>
Re: Debugging Kernel Panic
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Debugging Kernel Panic
- From: Zac Storer <zac.3.14159@xxxxxxxxx>
Interrupt not getting re-enabled after handler is killed
- From: anish singh <anish198519851985@xxxxxxxxx>
Re: difference between io_schedule() and schedule()
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Mapped more than Cached in /proc/meminfo
- From: Prateek Sharma <prateek3.14@xxxxxxxxx>
Re: Mapped more than Cached in /proc/meminfo
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Debugging Kernel Panic
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
Debugging Kernel Panic
- From: Zac Storer <zac.3.14159@xxxxxxxxx>
Re: Mapped more than Cached in /proc/meminfo
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
Re: difference between io_schedule() and schedule()
- From: Rajat Sharma <fs.rajat@xxxxxxxxx>
Re: Mapped more than Cached in /proc/meminfo
- From: "=/_00/\\/\\" <z0032oom@xxxxxxxxx>
Re: About HPET is_hpet_capable()
- From: Stratos Psomadakis <s.psomadakis@xxxxxxxxx>
About HPET is_hpet_capable()
- From: limp <johnkyr83@xxxxxxxxxxx>
Re: kallsyms_lookup_name
- From: Venkatram Tummala <venkatram867@xxxxxxxxx>
Re: new kernel boot
- From: Amirali Shambayati <amirali.shambayati@xxxxxxxxx>
Re: new kernel boot
- From: Spiro Trikaliotis <ml-kernelnewbies@xxxxxxxxxxxxxxxxxxxxx>
Re: kallsyms_lookup_name
- From: Abu Rasheda <rcpilot2010@xxxxxxxxx>
Re: xx_initcall ( ) in kernel
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Re: difference between io_schedule() and schedule()
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: Creating sparse file on XFS and EXT3 has different results
- From: Ashish Sangwan <ashishsangwan2@xxxxxxxxx>
Re: Creating sparse file on XFS and EXT3 has different results
- From: Ashish Sangwan <ashishsangwan2@xxxxxxxxx>
Re: Compile kernel for various times and problem of too long time consuming
- From: Prateek Sharma <prateek3.14@xxxxxxxxx>
Re: Compile kernel for various times and problem of too long time consuming
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
Re: new kernel boot
- From: Eduard Sinelnikov <eduard.sinelnikov@xxxxxxxxx>
new kernel boot
- From: Amirali Shambayati <amirali.shambayati@xxxxxxxxx>
Re: MSI-edge in /proc/interrupts
- From: Prashant Shah <pshah.mumbai@xxxxxxxxx>
MSI-edge in /proc/interrupts
- From: "J.Hwan Kim" <frog1120@xxxxxxxxx>
Exact scenario to use __wait_on_bit() ?
- From: Indraneel Mukherjee <indro.ml@xxxxxxxxx>
Re: kallsyms_lookup_name
- From: Venkatram Tummala <venkatram867@xxxxxxxxx>
Re: Creating sparse file on XFS and EXT3 has different results
- From: mani <manishrma@xxxxxxxxx>
Re: kallsyms_lookup_name
- From: Abu Rasheda <rcpilot2010@xxxxxxxxx>
Re: Question on Alignment requiremnet
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Re: Compile kernel for various times and problem of too long time consuming
- From: Amirali Shambayati <amirali.shambayati@xxxxxxxxx>
Re: Compile kernel for various times and problem of too long time consuming
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Compile kernel for various times and problem of too long time consuming
- From: Amirali Shambayati <amirali.shambayati@xxxxxxxxx>
Compile kernel for various times and problem of too long time consuming
- From: Amirali Shambayati <amirali.shambayati@xxxxxxxxx>
Re: Reserve physical page
- From: Prateek Sharma <prateek3.14@xxxxxxxxx>
Re: Reserve physical page
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
Re: Question on Alignment requiremnet
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: Reserve physical page
- From: Thayumanavar S <thayumker@xxxxxxxxx>
Re: Reserve physical page
- From: Prateek Sharma <prateek3.14@xxxxxxxxx>
Re: Question on Alignment requiremnet
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: One more question on alignment
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Re: One more question on alignment
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
One more question on alignment
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Re: Compiling kernel module ...
- From: Greg KH <greg@xxxxxxxxx>
Re: Question on Alignment requiremnet
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Re: Compiling kernel module ...
- From: Abu Rasheda <rcpilot2010@xxxxxxxxx>
Re: Compiling kernel module ...
- From: Greg KH <greg@xxxxxxxxx>
Re: Compiling kernel module ...
- From: Abu Rasheda <rcpilot2010@xxxxxxxxx>
Re: kallsyms_lookup_name
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Reserve physical page
- From: Thayumanavar S <thayumker@xxxxxxxxx>
Re: Question on Alignment requiremnet
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Debugging the linux kernel core dump
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Question on Alignment requiremnet
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Re: Creating sparse file on XFS and EXT3 has different results
- From: mani <manishrma@xxxxxxxxx>
Re: How to get current core id in kernel source
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
How to get current core id in kernel source
- From: "J.Hwan Kim" <frog1120@xxxxxxxxx>
Reserve physical page
- From: Prateek Sharma <prateek3.14@xxxxxxxxx>
difference between io_schedule() and schedule()
- From: Rajat Sharma <fs.rajat@xxxxxxxxx>
kallsyms_lookup_name
- From: Venkatram Tummala <venkatram867@xxxxxxxxx>
Re: Debugging the linux kernel core dump
- From: Akash <email2akashjain@xxxxxxxxx>
Re: how to freeze the 2.6 kernel on SMP m/c
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Mapped more than Cached in /proc/meminfo
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Debugging the linux kernel core dump
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: can i simply "re-version" the kernel down to 2.x?
- From: Josh Cartwright <joshc@xxxxxxxxx>
Re: Compiling kernel module ...
- From: Akash <email2akashjain@xxxxxxxxx>
Re: Reboot not calling module_exit of LKM
- From: "Ramesh.P" <rameshpa@xxxxxxxxx>
trouble with __aquires(lock) __releases(lock)
- From: Jim Cromie <jim.cromie@xxxxxxxxx>
Compiling kernel module ...
- From: Abu Rasheda <rcpilot2010@xxxxxxxxx>
Re: Reboot not calling module_exit of LKM
- From: Greg KH <greg@xxxxxxxxx>
Reboot not calling module_exit of LKM
- From: "Ramesh.P" <rameshpa@xxxxxxxxx>
Re: can i simply "re-version" the kernel down to 2.x?
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
Re: can i simply "re-version" the kernel down to 2.x?
- From: Greg KH <greg@xxxxxxxxx>
can i simply "re-version" the kernel down to 2.x?
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
Mapped more than Cached in /proc/meminfo
- From: "=/_00/\\/\\" <z0032oom@xxxxxxxxx>
Re: Creating sparse file on XFS and EXT3 has different results
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: Creating sparse file on XFS and EXT3 has different results
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
how to freeze the 2.6 kernel on SMP m/c
- From: san deep <sandeep.albur@xxxxxxxxx>
Re: Debugging the linux kernel core dump
- From: amit mehta <gmate.amit@xxxxxxxxx>
Re: Debugging the linux kernel core dump
- From: Akash <email2akashjain@xxxxxxxxx>
Re: Debugging the linux kernel core dump
- From: amit mehta <gmate.amit@xxxxxxxxx>
Need help: GCC cross compiler and OS/platform dependency
- From: amit mehta <gmate.amit@xxxxxxxxx>
Debugging the linux kernel core dump
- From: Akash <email2akashjain@xxxxxxxxx>
Creating sparse file on XFS and EXT3 has different results
- From: Ashish Sangwan <ashishsangwan2@xxxxxxxxx>
Kernel support for video and graphics overlay
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
Re: Usage of unlikely in RCU code
- From: Julie Sullivan <kernelmail.jms@xxxxxxxxx>
Re: Usage of unlikely in RCU code
- From: Julie Sullivan <kernelmail.jms@xxxxxxxxx>
Re: Usage of unlikely in RCU code
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: [net] Hacking the wholism of GNU/Linux net*
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: understanding the SCSI Specification.
- From: Jack Wang <xjtuwjp@xxxxxxxxx>
Re: Usage of unlikely in RCU code
- From: Adam Cozzette <acozzette@xxxxxxxxxx>
Re: Usage of unlikely in RCU code
- From: Julie Sullivan <kernelmail.jms@xxxxxxxxx>
Re: understanding the SCSI Specification.
- From: RKK <kulkarni.ravi4@xxxxxxxxx>
Re: understanding the SCSI Specification.
- From: amit mehta <gmate.amit@xxxxxxxxx>
can LTP be used to verify the ASIC design of peripherals
- From: Gang Lei (雷刚) <gang.lei@xxxxxxxxxxxx>
Re: Tasklet vs workqueues
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
Re: How to isolate Hardware for one particular process
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
Re: [net] Hacking the wholism of GNU/Linux net*
- From: Shawn <citypw@xxxxxxxxx>
Re: understanding the SCSI Specification.
- From: RKK <kulkarni.ravi4@xxxxxxxxx>
How to isolate Hardware for one particular process
- From: bill <bill_carson@xxxxxxx>
Re: Asking about how to edit wiki?
- From: Shawn <citypw@xxxxxxxxx>
Re: [net] Hacking the wholism of GNU/Linux net*
- From: Prashant Shah <pshah.mumbai@xxxxxxxxx>
Re: Asynchronous read
- From: Da Zheng <zhengda1936@xxxxxxxxx>
Re: Asking about how to edit wiki?
- From: Michael Blizek <michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Re: Asking about how to edit wiki?
- From: Anuz Pratap Singh Tomar <chambilkethakur@xxxxxxxxx>
Asking about how to edit wiki?
- From: Shawn <citypw@xxxxxxxxx>
Re: [net] Hacking the wholism of GNU/Linux net*
- From: Shawn <citypw@xxxxxxxxx>
Re: [net] Hacking the wholism of GNU/Linux net*
- From: Shawn <citypw@xxxxxxxxx>
Re:Re: Re: Bond, round robin mis-configuration.
- From: bill <bill_carson@xxxxxxx>
Re: Usage of unlikely in RCU code
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Usage of unlikely in RCU code
- From: Manish Katiyar <mkatiyar@xxxxxxxxx>
Re: Usage of unlikely in RCU code
- From: Dave Hylands <dhylands@xxxxxxxxx>
Usage of unlikely in RCU code
- From: Julie Sullivan <kernelmail.jms@xxxxxxxxx>
Re: [net] Hacking the wholism of GNU/Linux net*
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
RE: [net] Hacking the wholism of GNU/Linux net*
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: understanding the SCSI Specification.
- From: amit mehta <gmate.amit@xxxxxxxxx>
Re: Tasklet vs workqueues
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: [net] Hacking the wholism of GNU/Linux net*
- From: "mypopy@xxxxxxxxx" <mypopy@xxxxxxxxx>
Re: [net] Hacking the wholism of GNU/Linux net*
- From: Anuz Pratap Singh Tomar <chambilkethakur@xxxxxxxxx>
[net] Hacking the wholism of GNU/Linux net*
- From: Shawn <citypw@xxxxxxxxx>
Re: Tasklet vs workqueues
- From: santhosh kumars <karuna.linux@xxxxxxxxx>
One more question about interrupts
- From: manish honap <manish_honap_vit@xxxxxxxxxxx>
Re: Re: Bond, round robin mis-configuration.
- From: Eduard Sinelnikov <eduard.sinelnikov@xxxxxxxxx>
understanding the SCSI Specification.
- From: RKK <kulkarni.ravi4@xxxxxxxxx>
Re:Re: Bond, round robin mis-configuration.
- From: bill <bill_carson@xxxxxxx>
Re: Bond, round robin mis-configuration.
- From: Eduard Sinelnikov <eduard.sinelnikov@xxxxxxxxx>
Re: Asynchronous read
- From: Rajat Sharma <fs.rajat@xxxxxxxxx>
Re: embedded ftp server which support IPV6
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Asynchronous read
- From: Adam Cozzette <acozzette@xxxxxxxxxx>
RE: embedded ftp server which support IPV6
- From: Gang Lei (雷刚) <gang.lei@xxxxxxxxxxxx>
Asynchronous read
- From: Da Zheng <zhengda1936@xxxxxxxxx>
Re: Bond, round robin mis-configuration.
- From: Peter Senna Tschudin <peter.senna@xxxxxxxxx>
Re: Bond, round robin mis-configuration.
- From: Eduard Sinelnikov <eduard.sinelnikov@xxxxxxxxx>
Re: Bond, round robin mis-configuration.
- From: Peter Senna Tschudin <peter.senna@xxxxxxxxx>
Bond, round robin mis-configuration.
- From: Eduard Sinelnikov <eduard.sinelnikov@xxxxxxxxx>
Re: Tasklet vs workqueues
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Fw: Question about interrupts
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: How to get cpu utilization through code with least overhead?
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Tasklet vs workqueues
- From: santhosh kumars <karuna.linux@xxxxxxxxx>
Re: Fw: Question about interrupts
- From: santhosh kumars <karuna.linux@xxxxxxxxx>
Re: How can install gcc-3.2.tar.bz
- From: "Leonid V. Fedorenchik" <leonidsbox@xxxxxxxxx>
No printk to inform how much memory freed in ARM after booting
- From: anish singh <anish198519851985@xxxxxxxxx>
Re: emneded ftp server which support IPV6
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Regarding connector netlink running out of buffer space.
- From: mindentropy <mindentropy@xxxxxxxxx>
RE: Regarding connector netlink running out of buffer space.
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Regarding connector netlink running out of buffer space.
- From: mindentropy <mindentropy@xxxxxxxxx>
How can install gcc-3.2.tar.bz
- From: esmaeil mirzaee <esmaeil.debian@xxxxxxxxx>
Re: How can patch a bug
- From: esmaeil mirzaee <esmaeil.debian@xxxxxxxxx>
Re: How to get cpu utilization through code with least overhead?
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: How can patch a bug
- From: Anuz Pratap Singh Tomar <chambilkethakur@xxxxxxxxx>
How can patch a bug
- From: esmaeil mirzaee <esmaeil.debian@xxxxxxxxx>
Re: about gcc-3.4.6
- From: esmaeil mirzaee <esmaeil.debian@xxxxxxxxx>
Re: about gcc-3.4.6
- From: Bernd Petrovitsch <bernd@xxxxxxxxxxxxxxxxxxx>
Re: about gcc-3.4.6
- From: esmaeil mirzaee <esmaeil.debian@xxxxxxxxx>
Re: about gcc-3.4.6
- From: Pravin Shedage <pravinshedage2008@xxxxxxxxx>
Re: about gcc-3.4.6
- From: Bernd Petrovitsch <bernd@xxxxxxxxxxxxxxxxxxx>
about gcc-3.4.6
- From: esmaeil mirzaee <esmaeil.debian@xxxxxxxxx>
Re: Query regarding dma_alloc()
- From: RKK <kulkarni.ravi4@xxxxxxxxx>
Fw: Question about interrupts
- From: manish honap <manish_honap_vit@xxxxxxxxxxx>
Re: Question about interrupts
- From: santhosh kumars <karuna.linux@xxxxxxxxx>
Question about interrupts
- From: manish honap <manish_honap_vit@xxxxxxxxxxx>
Query regarding dma_alloc()
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Re: will kill frees the kernel resources?
- From: Gaurang Shastri <gmshastri@xxxxxxxxx>
will kill frees the kernel resources?
- From: Tirtha Ghosh <gtirtha@xxxxxxxxx>
RE: emneded ftp server which support IPV6
- From: Gang Lei (雷刚) <gang.lei@xxxxxxxxxxxx>
Re: How to get cpu utilization through code with least overhead?
- From: Raghu Udiyar <raghusiddarth@xxxxxxxxx>
Re: How to get cpu utilization through code with least overhead?
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Regarding netlink connector documentation code.
- From: mindentropy <mindentropy@xxxxxxxxx>
Re: How to get cpu utilization through code with least overhead?
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: How to get cpu utilization through code with least overhead?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
How to get cpu utilization through code with least overhead?
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Using RPMBUILD
- From: Bernd Petrovitsch <bernd@xxxxxxxxxxxxxxxxxxx>
Re: emneded ftp server which support IPV6
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
RE: emneded ftp server which support IPV6
- From: Gang Lei (雷刚) <gang.lei@xxxxxxxxxxxx>
Using RPMBUILD
- From: Rodger Swann <rodger.swann@xxxxxxxxxx>
Regarding perf top utility in linux
- From: ankur dwivedi <ankurengg2003@xxxxxxxxx>
about create_mapping function
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Re: emneded ftp server which support IPV6
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
emneded ftp server which support IPV6
- From: Gang Lei (雷刚) <gang.lei@xxxxxxxxxxxx>
Re: when early_param("string", function_name) will be called?
- From: Dave Hylands <dhylands@xxxxxxxxx>
when early_param("string", function_name) will be called?
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Re: failed to do make menuconfig
- From: Prashant Shah <pshah.mumbai@xxxxxxxxx>
Re: failed to do make menuconfig
- From: srivatsa bhat <bhat.srivatsa@xxxxxxxxx>
Re: failed to do make menuconfig
- From: Prashant Shah <pshah.mumbai@xxxxxxxxx>
Re: Interesting case while taking Ramdump of Linux kernel based device
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
Re: no files can be opened in a C program
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Re: Query regarding kernel memory
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: no files can be opened in a C program
- From: Manish Katiyar <mkatiyar@xxxxxxxxx>
Re: no files can be opened in a C program
- From: Manish Katiyar <mkatiyar@xxxxxxxxx>
Re: Query regarding kernel memory
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: no files can be opened in a C program
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Re: Query regarding kernel memory
- From: santhosh kumars <karuna.linux@xxxxxxxxx>
Re: Query regarding kernel memory
- From: Dave Hylands <dhylands@xxxxxxxxx>
Query regarding kernel memory
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: T.XYZ symbols
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: T.XYZ symbols
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: T.XYZ symbols
- From: Andreas Platschek <andi.platschek@xxxxxxxxx>
Re: T.XYZ symbols
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: T.XYZ symbols
- From: andi <andi.platschek@xxxxxxxxx>
Re: T.XYZ symbols
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: no files can be opened in a C program
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: failed to do make menuconfig
- From: Prashant Shah <pshah.mumbai@xxxxxxxxx>
Re: failed to do make menuconfig
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: no files can be opened in a C program
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Re: Need help: How to set .RECIPEPREFIX variable to whitespaces
- From: amit mehta <gmate.amit@xxxxxxxxx>
Re: no files can be opened in a C program
- From: Naveen Kumar <navee83@xxxxxxxxx>
Re: no files can be opened in a C program
- From: Anuz Pratap Singh Tomar <chambilkethakur@xxxxxxxxx>
no files can be opened in a C program
- From: Venkateswarlu P <p.venkatesh551@xxxxxxxxx>
Re: problem with queue numbers between bridge, bonding and lo devices
- From: "jiangtao.jit" <jiangtao.jit@xxxxxxxxx>
T.XYZ symbols
- From: Andreas Platschek <andi.platschek@xxxxxxxxx>
Re: Interesting case while taking Ramdump of Linux kernel based device
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Re: setitimer shows different between amd64 and ia32
- From: Adam Lee <adam8157@xxxxxxxxx>
Re: Interesting case while taking Ramdump of Linux kernel based device
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
Re: Interesting case while taking Ramdump of Linux kernel based device
- From: Dave Hylands <dhylands@xxxxxxxxx>
Interesting case while taking Ramdump of Linux kernel based device
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Re: setitimer shows different between amd64 and ia32
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: setitimer shows different between amd64 and ia32
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: regarding do_IRQ()
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
setitimer shows different between amd64 and ia32
- From: Adam Lee <adam8157@xxxxxxxxx>
regarding do_IRQ()
- From: santhosh kumars <karuna.linux@xxxxxxxxx>
"echo c > /proc/sysrq-trigger" is hung in fedora14 guest os.
- From: Sudhakar Jha <sudhakar.jha000@xxxxxxxxx>
Re: git format-patch: skipping interim commits.
- From: Ali Bahar <ali@xxxxxxxxxxxxxxx>
Re: git format-patch: skipping interim commits.
- From: Manish Katiyar <mkatiyar@xxxxxxxxx>
git format-patch: skipping interim commits.
- From: Ali Bahar <ali@xxxxxxxxxxxxxxx>
Re: Memory change notifications
- From: Kaspter Ju <nigh0st3018@xxxxxxxxx>
Re: How to recognize synchronous write requests
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: Problem installing vanilla kernel on Fedora 13
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
GPIO acces on x86
- From: Victor Rodriguez <vm.rod25@xxxxxxxxx>
Re: Problem installing vanilla kernel on Fedora 13
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
failed to do make menuconfig
- From: Prashant Shah <pshah.mumbai@xxxxxxxxx>
Re: mount FS without filesystem type
- From: piyush moghe <pmkernel@xxxxxxxxx>
Re: Problem installing vanilla kernel on Fedora 13
- From: "Srivatsa S. Bhat" <bhat.srivatsa@xxxxxxxxx>
Re: Problem installing vanilla kernel on Fedora 13
- From: Prashant Shah <pshah.mumbai@xxxxxxxxx>
Problem installing vanilla kernel on Fedora 13
- From: srivatsa bhat <bhat.srivatsa@xxxxxxxxx>
Problem installing vanilla kernel on Fedora 13
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re:RE: How to generate PAUSE frame
- From: bill <bill_carson@xxxxxxx>
Re: How to submit multiple related patches
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
How to submit multiple related patches
- From: Zac Storer <zac.3.14159@xxxxxxxxx>
How to write portable device drivers?
- From: gmane@xxxxxxxxxxxxxxxxxxxxxxxxxxx
Re: mount FS without filesystem type
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
Re: mount FS without filesystem type
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: Regarding remap_pfn_page
- From: mindentropy <mindentropy@xxxxxxxxx>
Re: Regarding remap_pfn_page
- From: Rajat Sharma <fs.rajat@xxxxxxxxx>
Re: Regarding remap_pfn_page
- From: mindentropy <mindentropy@xxxxxxxxx>
Re: Regarding remap_pfn_page
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
RE: How to generate PAUSE frame
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: Regarding remap_pfn_page
- From: mindentropy <mindentropy@xxxxxxxxx>
Re: mount FS without filesystem type
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
mount FS without filesystem type
- From: piyush moghe <pmkernel@xxxxxxxxx>
Re: Regarding remap_pfn_page
- From: Rajat Sharma <fs.rajat@xxxxxxxxx>
How to generate PAUSE frame
- From: bill <bill_carson@xxxxxxx>
Re: Re: problem with queue numbers between bridge, bonding and lo devices
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: Regarding remap_pfn_page
- From: mindentropy <mindentropy@xxxxxxxxx>
Re: Regarding remap_pfn_page
- From: mindentropy <mindentropy@xxxxxxxxx>
Re: Regarding remap_pfn_page
- From: mindentropy <mindentropy@xxxxxxxxx>
Re: Regarding remap_pfn_page
- From: Rajat Sharma <fs.rajat@xxxxxxxxx>
Re: PCI Driver not writing to Config Space
- From: Prashant Shah <pshah.mumbai@xxxxxxxxx>
PCI Driver not writing to Config Space
- From: Giriprasad Deviprasad <g_pr21@xxxxxxxx>
Regarding remap_pfn_page
- From: mindentropy <mindentropy@xxxxxxxxx>
Re: Re: problem with queue numbers between bridge, bonding and lo devices
- From: "jiangtao.jit" <jiangtao.jit@xxxxxxxxx>
Re: why backtiks for a word?
- From: zeal <zealcook@xxxxxxxxx>
Re: Memory change notifications
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Memory change notifications
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
Re: problem with queue numbers between bridge, bonding and lo devices
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: why backtiks for a word?
- From: Julie Sullivan <kernelmail.jms@xxxxxxxxx>
Re: Memory change notifications
- From: mindentropy <mindentropy@xxxxxxxxx>
Re: Memory change notifications
- From: mindentropy <mindentropy@xxxxxxxxx>
Memory change notifications
- From: Erlon Cruz <sombrafam@xxxxxxxxx>
Re: why backtiks for a word?
- From: mechanical amit <mechanicalamit@xxxxxxxxx>
Re: Need help understanding memory models, cpu modes and address translation
- From: Joel A Fernandes <agnel.joel@xxxxxxxxx>
Re: interview question how does application connects to device
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: interview question how does application connects to device
- From: Anuz Pratap Singh Tomar <chambilkethakur@xxxxxxxxx>
Re: interview question how does application connects to device
- From: Bond <jamesbond.2k.g@xxxxxxxxx>
Re: interview question how does application connects to device
- From: Bond <jamesbond.2k.g@xxxxxxxxx>
Re: interview question how does application connects to device
- From: Anuz Pratap Singh Tomar <chambilkethakur@xxxxxxxxx>
Re: interview question how does application connects to device
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: interview question how does application connects to device
- From: Bond <jamesbond.2k.g@xxxxxxxxx>
Re: interview question how does application connects to device
- From: Anuz Pratap Singh Tomar <chambilkethakur@xxxxxxxxx>
Re: interview question how does application connects to device
- From: Bond <jamesbond.2k.g@xxxxxxxxx>
Re: interview question how does application connects to device
- From: Anuz Pratap Singh Tomar <chambilkethakur@xxxxxxxxx>
Re: interview question how does application connects to device
- From: Bond <jamesbond.2k.g@xxxxxxxxx>
Re: why backtiks for a word?
- From: zeal <zealcook@xxxxxxxxx>
Re: why backtiks for a word?
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
Re: why backtiks for a word?
- From: zeal <zealcook@xxxxxxxxx>
Re: why backtiks for a word?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Need help understanding memory models, cpu modes and address translation
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Need help understanding memory models, cpu modes and address translation
- From: Joel A Fernandes <agnel.joel@xxxxxxxxx>
why backtiks for a word?
- From: zeal <zealcook@xxxxxxxxx>
Re: Need help understanding memory models, cpu modes and address translation
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: LinuxCon Japan Videos
- From: Julie Sullivan <kernelmail.jms@xxxxxxxxx>
Re: LinuxCon Japan Videos
- From: Paul Fisher <r01.gjk@xxxxxxxxx>
Re: LinuxCon Japan Videos
- From: Prashant Shah <pshah.mumbai@xxxxxxxxx>
Re: Difference between Processors
- From: Shaz <shazalive@xxxxxxxxx>
Difference between Processors
- From: Niamathullah sharief <newbiesha@xxxxxxxxx>
problem with queue numbers between bridge, bonding and lo devices
- From: "jiangtao.jit" <jiangtao.jit@xxxxxxxxx>
Re: Need help understanding memory models, cpu modes and address translation
- From: Rajesh S R <srrajesh1989@xxxxxxxxx>
Re: Need help understanding memory models, cpu modes and address translation
- From: santhosh kumars <karuna.linux@xxxxxxxxx>
Re: linux dma apis
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
linux dma apis
- From: Abhishek Batta <sweep.parser@xxxxxxxxx>
Re: Need help understanding memory models, cpu modes and address translation
- From: Joel A Fernandes <agnel.joel@xxxxxxxxx>
Re: Need help understanding memory models, cpu modes and address translation
- From: Kaustubh Ashtekar <ksashtekar@xxxxxxxxx>
Re: Need help understanding memory models, cpu modes and address translation
- From: Joel A Fernandes <agnel.joel@xxxxxxxxx>
Re: Need help understanding memory models, cpu modes and address translation
- From: Joel A Fernandes <agnel.joel@xxxxxxxxx>
Re: Need help understanding memory models, cpu modes and address translation
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Need help understanding memory models, cpu modes and address translation
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Need help understanding memory models, cpu modes and address translation
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
LinuxCon Japan Videos
- From: Paul Fisher <r01.gjk@xxxxxxxxx>
How to recognize synchronous write requests
- From: Amirali Shambayati <amirali.shambayati@xxxxxxxxx>
Re: change kthread priority
- From: santhosh kumars <karuna.linux@xxxxxxxxx>
Re: Questions regarding console drivers..
- From: Prashant Shah <pshah.mumbai@xxxxxxxxx>
Re: flush_cache_all API
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>

[Index of Archives] [Newbies FAQ] [Linux Kernel Mentors] [Linux Kernel Development] [IETF Annouce] [Git] [Networking] [Security] [Bugtraq] [Yosemite] [MIPS Linux] [ARM Linux] [Linux RAID] [Linux SCSI] [Linux ACPI]