Hi sandeep! On 7/25/11, sandeep kumar <coolsandyforyou@xxxxxxxxx> wrote: > Hi all, > In Android target mobiles there is a facility called "Ramdump", where the > entire Ram image is copied to a file > as the kernel goes to panic. > > Ramdump is implemented like this > 1) As the panic() function is called target will be reset. > 2) Bootloader boots up in specific mode, where it enables the USB driver in > uploading mode. > 3) Through USB entire RAM content is copied to a file in the host computer. > 4) This file is parsed through different tools and we can get the logs info > wat exactly happened just before kernel panic happend. > > > Now here is the interesting part, > While the mobile's RAM image is being uploaded to host computer, our > bootloader is still running in the mobile's RAM. > How can it copy its own running region. > > This triggered me the following questions, > > 1) When bootloader runs, will it run in a specific reserved region of RAM or > it takes entire RAM? AFAIK, it runs in specific region. For instance, for Das U-boot bootloader you can get this with $file ./uImage uImage: u-boot legacy uImage, Linux-2.6.35-g6d019da-dirty, Linux/ARM, OS Kernel Image (Not compressed), 2733288 bytes, Thu Sep 2 01:11:09 2010, Load Address: 0x80008000, Entry Point: 0x80008000, Header CRC: 0xEA95BF09, Data CRC: 0xF652AF6B > 2) When it hands over the control to kernel, will it relinquish the entire > RAM or certain part of RAM is reserved for it? > 3) Does kernel use the entire RAM while running? I think this kind of behaviour could be configurable. In case you have described bootloader can protect its code. Actually, kernel does not know itself how much RAM is presented. Bootloader must provide kernel with memory configuration through ATAGs (see mem boot option). Therefore, bootloader can reserve some RAM for itself and does not say kernel about it. As you have already get kernel use all memory which is provided with bootloader and it is not always an entry RAM. > 4) When the kernel is running, is ther any chance that, control again be > taken back to bootloader?(coz i saw in bootloader code kernel is being > called, > > after that code also some code is there,some printks and error handling > stuff) > > Pls help me out here.. > > > > -- > With regards, > Sandeep Kumar Anantapalli, > _______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
