Linux Kernel Newbies

Thread Index

Re: Does Linux process exist information leakage?
- From: Scott Lovenberg <scott.lovenberg@xxxxxxxxx>
Re: Does Linux process exist information leakage?
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Does Linux process exist information leakage?
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: Does LAN speed distributes among connected terminals on load
- From: Alexandru Juncu <alex.juncu@xxxxxxxxxx>
Does Linux process exist information leakage?
- From: 夏业添 <summerxyt@xxxxxxxxx>
Does LAN speed distributes among connected terminals on load
- From: Manavendra Nath Manav <mnm.kernel@xxxxxxxxx>
Re: TCP MD5 Verification - 2.6.35.14
- From: richard -rw- weinberger <richard.weinberger@xxxxxxxxx>
Re: TCP MD5 Verification - 2.6.35.14
- From: Nitin Sharma <nitinics@xxxxxxxxx>
Re: TCP MD5 Verification - 2.6.35.14
- From: richard -rw- weinberger <richard.weinberger@xxxxxxxxx>
Re: What is a console? and Why it is always associated with UART?
- From: Dave Hylands <dhylands@xxxxxxxxx>
What is a console? and Why it is always associated with UART?
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
TCP MD5 Verification - 2.6.35.14
- From: Nitin Sharma <nitinics@xxxxxxxxx>
Re: Some help about backporting a nic module to 2.6.32 longterm
- From: Greg KH <greg@xxxxxxxxx>
Re: Some help about backporting a nic module to 2.6.32 longterm
- From: André Ferraz <deferraz@xxxxxxxxxxxx>
Re: Some help about backporting a nic module to 2.6.32 longterm
- From: Greg KH <greg@xxxxxxxxx>
Re: BCM4313 802.11b/g/n Wireless LAN Controller error in kernel 3.0
- From: Julie Sullivan <kernelmail.jms@xxxxxxxxx>
Some help about backporting a nic module to 2.6.32 longterm
- From: André Ferraz <deferraz@xxxxxxxxxxxx>
BCM4313 802.11b/g/n Wireless LAN Controller error in kernel 3.0
- From: rajaneesh acharya <rajaneeshacharya@xxxxxxxxxxxxxx>
Re: DEFINE Macro
- From: Fredrick <fjohnber@xxxxxxxx>
Re: DEFINE Macro
- From: Josh Cartwright <joshc@xxxxxxxxx>
Re: kernel testing
- From: Ian Fleming <iflema@xxxxxxxxxxxx>
kernel testing
- From: chromaticwt zac <zac.3.14159@xxxxxxxxx>
Re: DEFINE Macro
- From: "mypopy@xxxxxxxxx" <mypopy@xxxxxxxxx>
DEFINE Macro
- From: Fredrick <fjohnber@xxxxxxxx>
Re: Snapshot in ext4
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: Snapshot in ext4
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: Snapshot in ext4
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: Snapshot in ext4
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
s3c24xx_console_init in s3c2440.c
- From: hz hanks <hankshz@xxxxxxxxx>
Re: help regarding ext4 extend and multiblock allocation
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: Internal Data structure of ext4
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: Regarding Copy on Write in ext4
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: Kernel oops when using kprobes
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Kernel oops when using kprobes
- From: Sorin Baltateanu <baltateanu.sorin@xxxxxxxxx>
Snapshot in ext4
- From: Swapnil Gaikwad <swapnilgaik72@xxxxxxxxx>
Snapshot in ext4
- From: Swapnil Gaikwad <swapnilgaik72@xxxxxxxxx>
Snapshot in ext4
- From: Swapnil Gaikwad <swapnilgaik72@xxxxxxxxx>
Internal Data structure of ext4
- From: Swapnil Gaikwad <swapnilgaik72@xxxxxxxxx>
Regarding Copy on Write in ext4
- From: Swapnil Gaikwad <swapnilgaik72@xxxxxxxxx>
Snapshot in ext4
- From: Swapnil Gaikwad <swapnilgaik72@xxxxxxxxx>
Re: Master Thesis
- From: Manavendra Nath Manav <mnm.kernel@xxxxxxxxx>
Master Thesis
- From: koriandus <koriandus@xxxxxxxxxxxxxx>
How to shutdown console redirection
- From: hz hanks <hankshz@xxxxxxxxx>
Re: initramfs question
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
initramfs question
- From: chromaticwt zac <zac.3.14159@xxxxxxxxx>
Re: Virtual machine query
- From: anish singh <anish198519851985@xxxxxxxxx>
Print contents in dst_entry
- From: Rahul Kumar <mailforgroup@xxxxxxxxx>
Re: Virtual machine query
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Virtual machine query
- From: Alexandru Juncu <alex.juncu@xxxxxxxxxx>
Virtual machine query
- From: manish honap <manish_honap_vit@xxxxxxxxxxx>
Re:
- From: Alexandru Juncu <alex.juncu@xxxxxxxxxx>
RE:
- From: Philip Anil-QBW348 <anil.philip@xxxxxxxxxxxxxxxxxxxxx>
RE:
- From: Alexandru Juncu <alex.juncu@xxxxxxxxxx>
RE:
- From: Philip Anil-QBW348 <anil.philip@xxxxxxxxxxxxxxxxxxxxx>
RE:
- From: Alexandru Juncu <alex.juncu@xxxxxxxxxx>
RE:
- From: Philip Anil-QBW348 <anil.philip@xxxxxxxxxxxxxxxxxxxxx>
Re:
- From: Alexandru Juncu <alex.juncu@xxxxxxxxxx>
[no subject]
- From: Philip Anil-QBW348 <anil.philip@xxxxxxxxxxxxxxxxxxxxx>
Re: logging kernel panics with netconsole
- From: Manavendra Nath Manav <mnm.kernel@xxxxxxxxx>
Re: Suspicious URL:Re: Check Interface Status
- From: nilesh <nilesh.tayade@xxxxxxxxxxxx>
[BUG] SIOCSIFFLAGS returns -EIO on SMSC LAN911x
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
Re: Check Interface Status
- From: michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Re: Check Interface Status
- From: nilesh <nilesh.tayade@xxxxxxxxxxxx>
Re: Debugging memory allocation crash
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: What is Big Kernel Lock?
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
struct net_device locking
- From: michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Re: GPIO driver module for Jetway NF98 board
- From: Josh Cartwright <joshc@xxxxxxxxx>
Re: Check Interface Status
- From: michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Re: Debugging memory allocation crash
- From: contemplating zombie <contemplatingzombie@xxxxxxxxx>
Re: What is Big Kernel Lock?
- From: Matt Schulte <matts@xxxxxxxxxxxxxxxxxxxx>
Check Interface Status
- From: Rahul Kumar <mailforgroup@xxxxxxxxx>
Re: what is trace_sched_kthread_stop_ret used for?
- From: loody <miloody@xxxxxxxxx>
Re: help regarding ext4 extend and multiblock allocation
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Debugging memory allocation crash
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: What is Big Kernel Lock?
- From: "Vladimir Murzin" <murzin.v@xxxxxxxxx>
Re: Kernelnewbies Digest, Vol 13, Issue 42
- From: venu <bvg_1@xxxxxxxxx>
What is Big Kernel Lock?
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Debugging memory allocation crash
- From: contemplating zombie <contemplatingzombie@xxxxxxxxx>
Re: ipip6_tunnel_xmit
- From: Rahul Kumar <mailforgroup@xxxxxxxxx>
help regarding ext4 extend and multiblock allocation
- From: Swapnil Gaikwad <swapnilgaik72@xxxxxxxxx>
Re: Issue with ioctl commands - Linux version 2.6.35.7+
- From: Chetan Nanda <chetannanda@xxxxxxxxx>
RE: what is trace_sched_kthread_stop_ret used for?
- From: "Townsend, Richard" <Richard.Townsend@xxxxxxxxxxxxx>
Re: GPIO driver module for Jetway NF98 board
- From: Joan Pau Beltran <joanpau.beltran@xxxxxxx>
Re: how to determine whether in irq context
- From: loody <miloody@xxxxxxxxx>
Re: how to determine whether in irq context
- From: bojan prtvar <prtvar.b@xxxxxxxxx>
how to determine whether in irq context
- From: loody <miloody@xxxxxxxxx>
what is trace_sched_kthread_stop_ret used for?
- From: loody <miloody@xxxxxxxxx>
Re: Strange kernel reboot (oops?)
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Issue with ioctl commands - Linux version 2.6.35.7+
- From: Chetan Nanda <chetannanda@xxxxxxxxx>
Re: Issue with ioctl commands - Linux version 2.6.35.7+
- From: Dave Hylands <dhylands@xxxxxxxxx>
Message signal interrupts: Rule understanding
- From: Mukesh Yadav <mukesh.fkd@xxxxxxxxx>
Re: Strange kernel reboot (oops?)
- From: Ezequiel García <elezegarcia@xxxxxxxxxxxx>
Re: Issue with ioctl commands - Linux version 2.6.35.7+
- From: Chetan Nanda <chetannanda@xxxxxxxxx>
Re: Issue with ioctl commands - Linux version 2.6.35.7+
- From: Alexandru Juncu <alex.juncu@xxxxxxxxxx>
Issue with ioctl commands - Linux version 2.6.35.7+
- From: Chetan Nanda <chetannanda@xxxxxxxxx>
Re: Strange kernel reboot (oops?)
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: ipip6_tunnel_xmit
- From: Rahul Kumar <mailforgroup@xxxxxxxxx>
Re: Strange kernel reboot (oops?)
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Strange kernel reboot (oops?)
- From: Ezequiel García <elezegarcia@xxxxxxxxxxxx>
Re: A query about typeof
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Re: Packet drop while using BPF filter
- From: Raghavendra D Prabhu <raghu.prabhu13@xxxxxxxxx>
A query about typeof
- From: contemplating zombie <contemplatingzombie@xxxxxxxxx>
Re: Packet drop while using BPF filter
- From: Mukesh Yadav <mukesh.fkd@xxxxxxxxx>
TCP checksum offloading for raw sockets
- From: Mukesh Yadav <mukesh.fkd@xxxxxxxxx>
Re: delay in booting due to consloe_unlock inprintk
- From: Syam <k.meghasyam@xxxxxxxxx>
Re: delay in booting due to consloe_unlock inprintk
- From: jozreellaurent@xxxxxxxxx
Re: delay in booting due to consloe_unlock inprintk
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Metadata snapshot issues
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Metadata snapshot issues
- From: Swapnil Gaikwad <swapnilgaik72@xxxxxxxxx>
delay in booting due to consloe_unlock inprintk
- From: Syam <k.meghasyam@xxxxxxxxx>
kernel lock-free stack
- From: srimugunthan dhandapani <srimugunthan.dhandapani@xxxxxxxxx>
Re: kernel memory allocation
- From: Dave Hylands <dhylands@xxxxxxxxx>
kernel memory allocation
- From: "J.Hwan Kim" <frog1120@xxxxxxxxx>
logging kernel panics with netconsole
- From: chromaticwt zac <zac.3.14159@xxxxxxxxx>
Re: Packet drop while using BPF filter
- From: Raghavendra D Prabhu <raghu.prabhu13@xxxxxxxxx>
Re: Memory barrier
- From: Vladimir Murzin <murzin.v@xxxxxxxxx>
Re: GPIO driver module for Jetway NF98 board
- From: Josh Cartwright <joshc@xxxxxxxxx>
Re: Fwd: Problem: plist_add undefined!
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Fwd: Problem: plist_add undefined!
- From: Julie Sullivan <kernelmail.jms@xxxxxxxxx>
Re: Question about RCU
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
GPIO driver module for Jetway NF98 board
- From: Joan Pau Beltran <joanpau.beltran@xxxxxxx>
Re: Packet drop while using BPF filter
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
NFS server setup on Embedded Target
- From: naveen yadav <yad.naveen@xxxxxxxxx>
Re: Packet drop while using BPF filter
- From: Mukesh Yadav <mukesh.fkd@xxxxxxxxx>
Any good reference for Runtime suspend and resume
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Re: Packet drop while using BPF filter
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Packet drop while using BPF filter
- From: Mukesh Yadav <mukesh.fkd@xxxxxxxxx>
Re: 3.2.0-rc1 could not find module
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: 3.2.0-rc1 could not find module
- From: Martin Smith <smith_it2000@xxxxxxxxx>
Re: 3.2.0-rc1 could not find module
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: 3.2.0-rc1 could not find module
- From: Martin Smith <smith_it2000@xxxxxxxxx>
Re: 3.2.0-rc1 could not find module
- From: Martin Smith <smith_it2000@xxxxxxxxx>
Re: 3.2.0-rc1 could not find module
- From: Alexandru Juncu <alex.juncu@xxxxxxxxxx>
Re: 3.2.0-rc1 could not find module
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
MAX_PHYSADDR_BITS v/s MAX_PHYSMEM_BITS
- From: chandan r <chandanrmail@xxxxxxxxx>
Re: Issue with gdb 7.0 backtrace
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
3.2.0-rc1 could not find module
- From: Martin Smith <smith_it2000@xxxxxxxxx>
where to check Kthread info
- From: loody <miloody@xxxxxxxxx>
Issue with gdb 7.0 backtrace
- From: solmac john <johnsolmac@xxxxxxxxx>
Re: Snapshot implementation on ext4 filesystem and fedora or redhat OS
- From: Manish Katiyar <mkatiyar@xxxxxxxxx>
Snapshot implementation on ext4 filesystem and fedora or redhat OS
- From: Swapnil Gaikwad <swapnilgaik72@xxxxxxxxx>
Re: Is there a way to build a cross reference with kernel file
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Taking snapshot in ext4 filesystem
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Taking snapshot in ext4 filesystem
- From: Swapnil Gaikwad <swapnilgaik72@xxxxxxxxx>
Question about RCU
- From: contemplating zombie <contemplatingzombie@xxxxxxxxx>
RE: Is there a way to build a cross reference with kernel file
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
RE: Is there a way to build a cross reference with kernel file
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: Is there a way to build a cross reference with kernel file
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
RE: Is there a way to build a cross reference with kernel file
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: Kernel user communication mechanism
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Kernel user communication mechanism
- From: Greg KH <greg@xxxxxxxxx>
Re: wrong core dump information
- From: solmac john <johnsolmac@xxxxxxxxx>
wrong core dump information
- From: solmac john <johnsolmac@xxxxxxxxx>
Re: Kernel user communication mechanism
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: How to copy metadata of all files in a ext4 filesystem
- From: "Lakshmipathi.G" <lakshmipathi.g@xxxxxxxxx>
Re: How to copy metadata of all files in a ext4 filesystem
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
How to copy metadata of all files in a ext4 filesystem
- From: Swapnil Gaikwad <swapnilgaik72@xxxxxxxxx>
why no vsyscall support on x86 or i386 ?
- From: Fredrick <fjohnber@xxxxxxxx>
Re: Why is the xadd instruction used to get atomic operation?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Kernel user communication mechanism
- From: Konstantin Zertsekel <zertsekel@xxxxxxxxx>
Re: some questions about log level
- From: loody <miloody@xxxxxxxxx>
Re: Guidance on writing device drivers
- From: पारस <beparas@xxxxxxxxx>
Why is the xadd instruction used to get atomic operation?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: interrupt handler in arm question
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Re: How to copy kernel headers?
- From: autif khan <autif.mlist@xxxxxxxxx>
Re: How to copy kernel headers?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Kernel user communication mechanism
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Storage and I/O subsystem
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Storage and I/O subsystem
- From: RKK <kulkarni.ravi4@xxxxxxxxx>
Re: cuboot/cuImage? treeboot/treeImage?
- From: Fredrick <fjohnber@xxxxxxxx>
Re: How to copy kernel headers?
- From: autif khan <autif.mlist@xxxxxxxxx>
Re: How to copy kernel headers?
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Learning Linux Kernel
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: how can we wake up some process which is scheduled?
- From: Dave Hylands <dhylands@xxxxxxxxx>
How to copy kernel headers?
- From: autif khan <autif.mlist@xxxxxxxxx>
apply_alternatives and cpu hotplug
- From: Dannie Stanley <dannie.stanley@xxxxxxxxx>
Re: Learning Linux Kernel
- From: Kaushal Shriyan <kaushalshriyan@xxxxxxxxx>
Re: interrupt handler in arm question
- From: Konstantin Zertsekel <zertsekel@xxxxxxxxx>
Re: how can we wake up some process which is scheduled?
- From: Alexandru Juncu <alex.juncu@xxxxxxxxxx>
how can we wake up some process which is scheduled?
- From: loody <miloody@xxxxxxxxx>
YAMAHA YGV630 device driver
- From: chen walle <superccxin@xxxxxxxxx>
Re: Learning Linux Kernel
- From: nilesh <nilesh.tayade@xxxxxxxxxxxx>
Re: Learning Linux Kernel
- From: Victor Rodriguez <vm.rod25@xxxxxxxxx>
Re: some questions about log level
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: objdump -S for a different dir.
- From: Jim Cromie <jim.cromie@xxxxxxxxx>
Re: memory barrier in UP
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: some questions about log level
- From: loody <miloody@xxxxxxxxx>
Re: Learning Linux Kernel
- From: Greg KH <greg@xxxxxxxxx>
Re: Learning Linux Kernel
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
Re: Learning Linux Kernel
- From: Kaushal Shriyan <kaushalshriyan@xxxxxxxxx>
Re: Learning Linux Kernel
- From: Greg KH <greg@xxxxxxxxx>
Re: Learning Linux Kernel
- From: Alexandru Juncu <alex.juncu@xxxxxxxxxx>
RE: Learning Linux Kernel
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Learning Linux Kernel
- From: Kaushal Shriyan <kaushalshriyan@xxxxxxxxx>
Fwd: kernel 3.2rc4 hangs if I use allyesconfig
- From: Jim Cromie <jim.cromie@xxxxxxxxx>
Re: memory barrier in UP
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Re: interrupt handler in arm question
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Re: some questions about log level
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: some questions about log level
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: memory barrier in UP
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
some questions about log level
- From: loody <miloody@xxxxxxxxx>
Re: Conditional compilation depending on CONFIG_FOOBAR
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
Re: Linux Kernel Version 3.x
- From: Philip Downer <phil@xxxxxxxxx>
Re: interrupt handler in arm question
- From: Konstantin Zertsekel <zertsekel@xxxxxxxxx>
coredump issues in SMP kernel.
- From: solmac john <johnsolmac@xxxxxxxxx>
Re: Conditional compilation depending on CONFIG_FOOBAR
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
kernel 3.2rc4 hangs if I use allyesconfig
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: Linux Kernel Version 3.x
- From: Stephen Gream <poisonthemon@xxxxxxxxx>
Linux Kernel Version 3.x
- From: Kaushal Shriyan <kaushalshriyan@xxxxxxxxx>
Re: Conditional compilation depending on CONFIG_FOOBAR
- From: contemplating zombie <contemplatingzombie@xxxxxxxxx>
Conditional compilation depending on CONFIG_FOOBAR
- From: contemplating zombie <contemplatingzombie@xxxxxxxxx>
Re: Query about Enhanced Out-Of-Memory handling
- From: bill4carson <bill4carson@xxxxxxxxx>
Re: task switching and current pointer implemenation question
- From: Julie Sullivan <kernelmail.jms@xxxxxxxxx>
memory barrier in UP
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Re: interrupt handler in arm question
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Re: interrupt handler in arm question
- From: Konstantin Zertsekel <zertsekel@xxxxxxxxx>
Re: interrupt handler in arm question
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Re: interrupt handler in arm question
- From: Konstantin Zertsekel <zertsekel@xxxxxxxxx>
Re: Query about Enhanced Out-Of-Memory handling
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: cuboot/cuImage? treeboot/treeImage?
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: Queries about Net-Filter Hooks !!!
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
interrupt handler in arm question
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Re: task switching and current pointer implemenation question
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Re: task switching and current pointer implemenation question
- From: Dave Hylands <dhylands@xxxxxxxxx>
task switching and current pointer implemenation question
- From: subin gangadharan <subingangadharan@xxxxxxxxx>
Re: objdump -S for a different dir.
- From: Dave Hylands <dhylands@xxxxxxxxx>
objdump -S for a different dir.
- From: Jim Cromie <jim.cromie@xxxxxxxxx>
Re: kernel 3.2rc4 hangs if I use allyesconfig
- From: rajaneesh acharya <rajaneeshacharya@xxxxxxxxxxxxxx>
Re: kernel 3.2rc4 hangs if I use allyesconfig
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: multiple definition error from dl-addr.c with addition of printf, in glibc compilation
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
TSC Clocksource calibration in kernel3.1.4
- From: rajaneesh acharya <rajaneeshacharya@xxxxxxxxxxxxxx>
kernel 3.2rc4 hangs if I use allyesconfig
- From: rajaneesh acharya <rajaneeshacharya@xxxxxxxxxxxxxx>
Re: Re: Problem with OOM killer killing process even when there is plenty of RAM.
- From: Pritam Bankar <pritambankar1988@xxxxxxxxx>
Re: VFAT i_pos value
- From: OGAWA Hirofumi <hirofumi@xxxxxxxxxxxxxxxxxx>
RE: Memory barrier
- From: 卜弋天 <buyit@xxxxxxx>
Re: Memory barrier
- From: trisha yad <trisha1march@xxxxxxxxx>
Re: Memory barrier
- From: trisha yad <trisha1march@xxxxxxxxx>
RE: Memory barrier
- From: 卜弋天 <buyit@xxxxxxx>
Memory barrier
- From: trisha yad <trisha1march@xxxxxxxxx>
Re: multiple definition error from dl-addr.c with addition of printf, in glibc compilation
- From: solmac john <johnsolmac@xxxxxxxxx>
Re: VFAT i_pos value
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: What does inconsistent lock state mean?
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: What does inconsistent lock state mean?
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: multiple definition error from dl-addr.c with addition of printf, in glibc compilation
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Re: Problem with OOM killer killing process even when there is plenty of RAM.
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: What does inconsistent lock state mean?
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: multiple definition error from dl-addr.c with addition of printf, in glibc compilation
- From: solmac john <johnsolmac@xxxxxxxxx>
Re: multiple definition error from dl-addr.c with addition of printf, in glibc compilation
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
multiple definition error from dl-addr.c with addition of printf, in glibc compilation
- From: solmac john <johnsolmac@xxxxxxxxx>
Re: percpu variables from softirq context
- From: Vimal <j.vimal@xxxxxxxxx>
Re: Re: Re: Problem with OOM killer killing process even when there is plenty of RAM.
- From: Rajat Sharma <fs.rajat@xxxxxxxxx>
What does inconsistent lock state mean?
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: Re: Re: Problem with OOM killer killing process even when there is plenty of RAM.
- From: Greg KH <greg@xxxxxxxxx>
Re: Re: Re: Problem with OOM killer killing process even when there is plenty of RAM.
- From: mindentropy <mindentropy@xxxxxxxxx>
Re: Re: Problem with OOM killer killing process even when there is plenty of RAM.
- From: Greg KH <greg@xxxxxxxxx>
Re: Re: Problem with OOM killer killing process even when there is plenty of RAM.
- From: mindentropy <mindentropy@xxxxxxxxx>
Re: Re: Problem with OOM killer killing process even when there is plenty of RAM.
- From: mindentropy <mindentropy@xxxxxxxxx>
Re: percpu variables from softirq context
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Problem with OOM killer killing process even when there is plenty of RAM.
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Measuring time in range of microseconds.
- From: Sathishkumar Duraisamy <bewithsathish@xxxxxxxxx>
Re: Measuring time in range of microseconds.
- From: RKK <kulkarni.ravi4@xxxxxxxxx>
Re: Measuring time in range of microseconds.
- From: Sathishkumar Duraisamy <bewithsathish@xxxxxxxxx>
Re: Problem with OOM killer killing process even when there is plenty of RAM.
- From: Rajat Sharma <fs.rajat@xxxxxxxxx>
Re: drm/i915 can't work without intel_agp module
- From: Nick Minter <nick.minter87@xxxxxxxxx>
drm/i915 can't work without intel_agp module
- From: ashish anand <ashishanand26cs@xxxxxxxxx>
Re: Measuring time in range of microseconds.
- From: Fredrick <fjohnber@xxxxxxxx>
cuboot/cuImage? treeboot/treeImage?
- From: Fredrick <fjohnber@xxxxxxxx>
percpu variables from softirq context
- From: Vimal <j.vimal@xxxxxxxxx>
Problem with OOM killer killing process even when there is plenty of RAM.
- From: mindentropy <mindentropy@xxxxxxxxx>
Re: Measuring time in range of microseconds.
- From: Peter Senna Tschudin <peter.senna@xxxxxxxxx>
Re: Measuring time in range of microseconds.
- From: Sathishkumar Duraisamy <bewithsathish@xxxxxxxxx>
Re: Measuring time in range of microseconds.
- From: Peter Senna Tschudin <peter.senna@xxxxxxxxx>
Measuring time in range of microseconds.
- From: Sathishkumar Duraisamy <bewithsathish@xxxxxxxxx>
Re: Bug:scheduling while atomic..
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: Bug:scheduling while atomic..
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: which context can't use queue_work() function?
- From: onlyfever <onlyfever@xxxxxxxxx>
Re: What is Backing device used for?
- From: Mandeep Sandhu <mandeepsandhu.chd@xxxxxxxxx>
Bug:scheduling while atomic..
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Re: What is Backing device used for?
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Query about Enhanced Out-Of-Memory handling
- From: bill4carson <bill4carson@xxxxxxxxx>
PCI device disappeared
- From: Vimal <j.vimal@xxxxxxxxx>
Re: What is Backing device used for?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
What is Backing device used for?
- From: loody <miloody@xxxxxxxxx>
Re: which context can't use queue_work() function?
- From: michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
which context can't use queue_work() function?
- From: onlyfever <onlyfever@xxxxxxxxx>
USB SDCardReader hangs
- From: Jalil Karimov <jukarimov@xxxxxxxxx>
Re: VFAT i_pos value
- From: OGAWA Hirofumi <hirofumi@xxxxxxxxxxxxxxxxxx>
Re: VFAT i_pos value
- From: OGAWA Hirofumi <hirofumi@xxxxxxxxxxxxxxxxxx>
problem sending INIT_SIPI_SIPI through code
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: contribute to linux kernel
- From: Prabhakar Lad <prabhakar.csengg@xxxxxxxxx>
Re: contribute to linux kernel
- From: Mayank Agarwal <mayank77fromindia@xxxxxxxxx>
Re: What is the purpose of parse_elf() in misc.c
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: VFAT i_pos value
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: Understanding kmap/kunmap
- From: Kai Meyer <kai@xxxxxxxxxx>
About signal handler install info
- From: naveen yadav <yad.naveen@xxxxxxxxx>
Re: About signal handler install info
- From: rahul dev <rahul_dev_agg@xxxxxxxxxxx>
Re: Booting root filesystem from usb device
- From: Ezequiel García <elezegarcia@xxxxxxxxxxxx>
Re: VFAT i_pos value
- From: OGAWA Hirofumi <hirofumi@xxxxxxxxxxxxxxxxxx>
Re: VFAT i_pos value
- From: Kai Meyer <kai@xxxxxxxxxx>
Understanding kmap/kunmap
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: VFAT i_pos value
- From: OGAWA Hirofumi <hirofumi@xxxxxxxxxxxxxxxxxx>
Re: VFAT i_pos value
- From: Abhijit Hoskeri <abhijithoskeri@xxxxxxxxx>
VFAT i_pos value
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: Booting root filesystem from usb device
- From: Greg KH <greg@xxxxxxxxx>
Booting root filesystem from usb device
- From: Ezequiel García <elezegarcia@xxxxxxxxxxxx>
Re: modify bootlog in linux
- From: naveen yadav <yad.naveen@xxxxxxxxx>
modify bootlog in linux
- From: Mayank Agarwal <mayank77fromindia@xxxxxxxxx>
Re: How to hook the system call?
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
RE: What is RTNL lock?
- From: "Pritam Bankar" <pritambankar1988@xxxxxxxxx>
Forwarding an Altered Packet !!!
- From: Kesava Srinivas <vunnavafuture@xxxxxxxxx>
Re: What is RTNL lock?
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: How to hook the system call?
- From: Geraint Yang <geraint0923@xxxxxxxxx>
Re: How to hook the system call?
- From: richard -rw- weinberger <richard.weinberger@xxxxxxxxx>
Re: How to hook the system call?
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: x86 kernel build chain - how bzImage gets created
- From: Graeme Russ <graeme.russ@xxxxxxxxx>
What is RTNL lock?
- From: Vimal <j.vimal@xxxxxxxxx>
Re: Doubt in CDROM Ejecting Program
- From: Prashant Shah <pshah.mumbai@xxxxxxxxx>
Doubt in CDROM Ejecting Program
- From: Niamathullah sharief <newbiesha@xxxxxxxxx>
TSO support for veth
- From: Vimal <j.vimal@xxxxxxxxx>
Please help me...
- From: shibin k reeny <shibinkreeny@xxxxxxxxx>
Re: vmlinuz newbie questions
- From: Alexandru Juncu <alex.juncu@xxxxxxxxxx>
What is the purpose of parse_elf() in misc.c
- From: Graeme Russ <graeme.russ@xxxxxxxxx>
vmlinuz newbie questions
- From: "Jason T. Slack-Moehrle" <slackmoehrle@xxxxxxxxx>
Re: Guidance on writing device drivers
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
Re: Scull -unable to handle kernel paging request
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
Re: busybox utility
- From: Ezequiel García <elezegarcia@xxxxxxxxxxxx>
Re: busybox utility
- From: Ezequiel García <elezegarcia@xxxxxxxxxxxx>
Re: Ownership of sk_buff
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: How to hook the system call?
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Ownership of sk_buff
- From: Vimal <j.vimal@xxxxxxxxx>
Re: GPL-only symbol Error
- From: Greg KH <greg@xxxxxxxxx>
Re: GPL-only symbol Error
- From: Greg KH <greg@xxxxxxxxx>
RE: GPL-only symbol Error
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
issues regarding using initramfs for entire root fs?
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
Re: How to hook the system call?
- From: Nuno Martins <nuno.m.g.martins@xxxxxxxxx>
RE: GPL-only symbol Error
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: How to hook the system call?
- From: Geraint Yang <geraint0923@xxxxxxxxx>
Re: How to hook the system call?
- From: Alexandru Juncu <alex.juncu@xxxxxxxxxx>
Re: How to hook the system call?
- From: Geraint Yang <geraint0923@xxxxxxxxx>
Re: busybox utility
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
Re: How to hook the system call?
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: busybox utility
- From: naveen yadav <yad.naveen@xxxxxxxxx>
Re: How to hook the system call?
- From: Alexandru Juncu <alex.juncu@xxxxxxxxxx>
Re: How to hook the system call?
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
Re: How to hook the system call?
- From: Alexandru Juncu <alex.juncu@xxxxxxxxxx>
Re: how set_user_nice() function is called
- From: rohan puri <rohan.puri15@xxxxxxxxx>
How to hook the system call?
- From: Geraint Yang <geraint0923@xxxxxxxxx>
Re: plz help with the serial port pgm....
- From: Dave Hylands <dhylands@xxxxxxxxx>
plz help with the serial port pgm....
- From: shibin k reeny <shibinkreeny@xxxxxxxxx>
Re: busybox utility
- From: Mandeep Sandhu <mandeepsandhu.chd@xxxxxxxxx>
Re: busybox utility
- From: naveen yadav <yad.naveen@xxxxxxxxx>
Re: GPL-only symbol Error
- From: Greg KH <greg@xxxxxxxxx>
Re: GPL-only symbol Error
- From: Greg KH <greg@xxxxxxxxx>
RE: GPL-only symbol Error
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
RE: GPL-only symbol Error
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: GPL-only symbol Error
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: GPL-only symbol Error
- From: Guillaume Knispel <gknispel@xxxxxxxxxxxxxxxxx>
RE: GPL-only symbol Error
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: GPL-only symbol Error
- From: Graeme Russ <graeme.russ@xxxxxxxxx>
Re: GPL-only symbol Error
- From: Greg KH <greg@xxxxxxxxx>
RE: GPL-only symbol Error
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: GPL-only symbol Error
- From: Greg KH <greg@xxxxxxxxx>
Re: GPL-only symbol Error
- From: Greg KH <greg@xxxxxxxxx>
RE: GPL-only symbol Error
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: GPL-only symbol Error
- From: Sengottuvelan S <sengottuvelan.s@xxxxxxxxx>
RE: GPL-only symbol Error
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
GPL-only symbol Error
- From: Sengottuvelan S <sengottuvelan.s@xxxxxxxxx>
Re: Serial console temporarily garbled
- From: Neil Baylis <neil.baylis@xxxxxxxxx>
Re: busybox utility
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
Re: Serial console temporarily garbled
- From: Dave Hylands <dhylands@xxxxxxxxx>
Serial console temporarily garbled
- From: Neil Baylis <neil.baylis@xxxxxxxxx>
RE: busybox utility
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: x86 kernel build chain - how bzImage gets created
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Freeing work_struct memory
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Path for STOLEN Packets!!!
- From: shivanth <fordearlinux@xxxxxxxxx>
RE: a few questions regarding acpi and kernel configuration
- From: "Pritam Bankar" <pritambankar1988@xxxxxxxxx>
Re: x86 kernel build chain - how bzImage gets created
- From: Graeme Russ <graeme.russ@xxxxxxxxx>
Re: x86: Executing a raw vmlinux image (embedded environment)
- From: Graeme Russ <graeme.russ@xxxxxxxxx>
Re: x86 kernel build chain - how bzImage gets created
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
x86 kernel build chain - how bzImage gets created
- From: Graeme Russ <graeme.russ@xxxxxxxxx>
Re: how set_user_nice() function is called
- From: Enes Albay - انس الباى <albayenes@xxxxxxxxx>
Re: LPC bus access howto
- From: Andre Haupt <andre@xxxxxxxxxxxxxxx>
Re: busybox utility
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
busybox utility
- From: naveen yadav <yad.naveen@xxxxxxxxx>
Path for STOLEN Packets!!!
- From: Kesava Srinivas <vunnavafuture@xxxxxxxxx>
Re: x86: Executing a raw vmlinux image (embedded environment)
- From: "sk.syed2" <sk.syed2@xxxxxxxxx>
x86: Executing a raw vmlinux image (embedded environment)
- From: Graeme Russ <graeme.russ@xxxxxxxxx>
Freeing work_struct memory
- From: Kai Meyer <kai@xxxxxxxxxx>
RE: sock_buff is NULL !
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: sock_buff is NULL !
- From: Kesava Srinivas <vunnavafuture@xxxxxxxxx>
RE: sock_buff is NULL !
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
sock_buff is NULL !
- From: Kesava Srinivas <vunnavafuture@xxxxxxxxx>
Re: LPC bus access howto
- From: Guillaume Knispel <gknispel@xxxxxxxxxxxxxxxxx>
serial: 8250: RX hang issue
- From: Pradeep Kumar <pradeepkernel@xxxxxxxxx>
LPC bus access howto
- From: Andre Haupt <andre@xxxxxxxxxxxxxxx>
Re: Filtering USB storage data in kernel module
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Queries about Net-Filter Hooks !!!
- From: Kesava Srinivas <vunnavafuture@xxxxxxxxx>
Re: how set_user_nice() function is called
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
how set_user_nice() function is called
- From: Enes Albay - انس الباى <albayenes@xxxxxxxxx>
Regarding data transfer per beat in AXI.
- From: mindentropy <mindentropy@xxxxxxxxx>
Scull -unable to handle kernel paging request
- From: anish kumar <anish198519851985@xxxxxxxxx>
Re: Memory mapping in X86
- From: Sathishkumar Duraisamy <bewithsathish@xxxxxxxxx>
Re: Is an IRQ line disabled on local CPU or globally?
- From: santhosh kumars <karuna.linux@xxxxxxxxx>
Is an IRQ line disabled on local CPU or globally?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: Kernelnewbies Digest, Vol 12, Issue 25
- From: Sazzad <sazzadbinkamal@xxxxxxxxx>
Re: Guidance on writing device drivers
- From: Matthias Brugger <matthias.bgg@xxxxxxxxxxxxxx>
Re: Filtering USB storage data in kernel module
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Re: Filtering USB storage data in kernel module
- From: Greg KH <greg@xxxxxxxxx>
Re: User Mode Linux
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Registering for only Specific Packets from Net-Filter!!!!
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Filtering USB storage data in kernel module
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Can I get the information of bounce limit from sys?
- From: loody <miloody@xxxxxxxxx>
Re: Getting Information from Multiple nodes
- From: Praveen kumar <chatpravi@xxxxxxxxx>
Re: Registering for only Specific Packets from Net-Filter!!!!
- From: Kesava Srinivas <vunnavafuture@xxxxxxxxx>
Re: Registering for only Specific Packets from Net-Filter!!!!
- From: shivanth <fordearlinux@xxxxxxxxx>
Re: Filtering USB storage data in kernel module
- From: Greg KH <greg@xxxxxxxxx>
Re: User Mode Linux
- From: Vishal Thanki <vishalthanki@xxxxxxxxx>
Re: User Mode Linux
- From: Vishal Thanki <vishalthanki@xxxxxxxxx>
Filtering USB storage data in kernel module
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Re: Registering for only Specific Packets from Net-Filter!!!!
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Re: Registering for only Specific Packets from Net-Filter!!!!
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Getting Information from Multiple nodes
- From: anish kumar <anish198519851985@xxxxxxxxx>
Getting Information from Multiple nodes
- From: Praveen kumar <chatpravi@xxxxxxxxx>
Registering for only Specific Packets from Net-Filter!!!!
- From: Kesava Srinivas <vunnavafuture@xxxxxxxxx>
Re: User Mode Linux
- From: Vishal Thanki <vishalthanki@xxxxxxxxx>
Re: How can I know what is tainting my kernel
- From: Greg KH <greg@xxxxxxxxx>
Re: Locking IOCTL
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Generic I/O
- From: michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Re: Generic I/O
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: Generic I/O
- From: michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Re: Locking IOCTL
- From: Tirtha Ghosh <gtirtha@xxxxxxxxx>
Re: User Mode Linux
- From: "Lakshmipathi.G" <lakshmipathi.g@xxxxxxxxx>
User Mode Linux
- From: Vishal Thanki <vishalthanki@xxxxxxxxx>
Re: Locking IOCTL
- From: Praveen kumar <chatpravi@xxxxxxxxx>
Re: Locking IOCTL
- From: Dave Hylands <dhylands@xxxxxxxxx>
Locking IOCTL
- From: Praveen kumar <chatpravi@xxxxxxxxx>
Re: contribute to linux kernel
- From: Greg KH <greg@xxxxxxxxx>
contribute to linux kernel
- From: Mayank Agarwal <mayank77fromindia@xxxxxxxxx>
Generic I/O
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: Spinlocks and interrupts
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: put a message and wait a key on kernel boot
- From: Greg KH <greg@xxxxxxxxx>
FIQ support in Linux Kernel
- From: Konstantin Zertsekel <zertsekel@xxxxxxxxx>
put a message and wait a key on kernel boot
- From: Albert Wesker <awesker20@xxxxxxxxx>
Memory mapping in X86
- From: Sathishkumar Duraisamy <bewithsathish@xxxxxxxxx>
Re: why does the kernel use mutex to protect the address_space structure
- From: Zheng Da <zhengda1936@xxxxxxxxx>
Re: How can I know what is tainting my kernel
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
pseudo device
- From: Srinidhi Rao <srinidhi.rx@xxxxxxxxx>
Re: Obtaining a list of open sockets from "struct task_struct"
- From: Vimal <j.vimal@xxxxxxxxx>
Re: How can I know what is tainting my kernel
- From: Greg KH <greg@xxxxxxxxx>
Re: How can I know what is tainting my kernel
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: How can I know what is tainting my kernel
- From: Greg KH <greg@xxxxxxxxx>
How can I know what is tainting my kernel
- From: Daniel Hilst Selli <danielhilst@xxxxxxxxx>
Re: Obtaining a list of open sockets from "struct task_struct"
- From: Nuno Martins <nuno.m.g.martins@xxxxxxxxx>
Obtaining a list of open sockets from "struct task_struct"
- From: Vimal <j.vimal@xxxxxxxxx>
Pin configuration
- From: Stefan Schick <stefan.schick@xxxxxxxxxxxxxxxxxxxxxx>
Re: About kernel memory limit
- From: Geraint Yang <geraint0923@xxxxxxxxx>
Re: About kernel memory limit
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Spinlocks and interrupts
- From: Rajat Sharma <fs.rajat@xxxxxxxxx>
RE: About kernel memory limit
- From: adheer chandravanshi <adheer.c@xxxxxxxxxxx>
Re: About kernel memory limit
- From: Geraint Yang <geraint0923@xxxxxxxxx>
Re: About kernel memory limit
- From: Dave Stevens <geek@xxxxxxxxxxxx>
Re: About kernel memory limit
- From: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>
Re: About kernel memory limit
- From: Geraint Yang <geraint0923@xxxxxxxxx>
Re: Re SD/MMC subsystem resources
- From: Asutosh Das <das.asutosh@xxxxxxxxx>
Re: Re SD/MMC subsystem resources
- From: mani <manishrma@xxxxxxxxx>
Re: sd_prep_fn
- From: sumeet gandhare <sumeetgandhare@xxxxxxxxx>
Re: When Are Free Pages Zeroed?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Spinlocks and interrupts
- From: Kai Meyer <kai@xxxxxxxxxx>
RE: Spinlocks and interrupts
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: Spinlocks and interrupts
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: why tasklet cant sleep
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: About kernel memory limit
- From: Dave Hylands <dhylands@xxxxxxxxx>
RE: Spinlocks and interrupts
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: Spinlocks and interrupts
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Spinlocks and interrupts
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: Spinlocks and interrupts
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: Spinlocks and interrupts
- From: Kai Meyer <kai@xxxxxxxxxx>
why tasklet cant sleep
- From: santhosh kumars <karuna.linux@xxxxxxxxx>
Re: sd_prep_fn
- From: rohan puri <rohan.puri15@xxxxxxxxx>
About kernel memory limit
- From: Geraint Yang <geraint0923@xxxxxxxxx>
Re: sd_prep_fn
- From: sumeet gandhare <sumeetgandhare@xxxxxxxxx>
Re: sd_prep_fn
- From: rohan puri <rohan.puri15@xxxxxxxxx>
sd_prep_fn
- From: sumeet gandhare <sumeetgandhare@xxxxxxxxx>
Re: Spinlocks and interrupts
- From: santhosh kumars <karuna.linux@xxxxxxxxx>
Re: Re SD/MMC subsystem resources
- From: loody <miloody@xxxxxxxxx>
Re SD/MMC subsystem resources
- From: Asutosh Das <das.asutosh@xxxxxxxxx>
When Are Free Pages Zeroed?
- From: Patrick Simmons <linuxrocks123@xxxxxxxxxxxx>
Re: Spinlocks and interrupts
- From: Rajat Sharma <fs.rajat@xxxxxxxxx>
Re: Guidance on writing device drivers
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Guidance on writing device drivers
- From: Prajosh Premdas <premdas.prajosh@xxxxxxxxx>
Re: Spinlocks and interrupts
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Spinlocks and interrupts
- From: Dave Hylands <dhylands@xxxxxxxxx>
RE: Spinlocks and interrupts
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: Spinlocks and interrupts
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: Spinlocks and interrupts
- From: Dave Hylands <dhylands@xxxxxxxxx>
Spinlocks and interrupts
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: Char device initialization
- From: Daniel Hilst Selli <danielhilst@xxxxxxxxx>
Guidance on writing device drivers
- From: suraj khurana <surajkhurana27@xxxxxxxxx>
Re: Char device initialization
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Char device initialization
- From: Alexandru Juncu <alex.juncu@xxxxxxxxxx>
Char device initialization
- From: Daniel Hilst Selli <danielhilst@xxxxxxxxx>
Re: Getting a block from a block device?
- From: Dan Luedtke <maildanrl@xxxxxxxxxxxxxx>
Re: Getting a block from a block device?
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Mailing list for 802.15.4
- From: Xiangfu Liu <xiangfu@xxxxxxxxxx>
Re: Mailing list for 802.15.4
- From: Christophe Aeschlimann <c.aeschlimann@xxxxxxxxxxxx>
Re: Getting a block from a block device?
- From: Manish Katiyar <mkatiyar@xxxxxxxxx>
Re: Getting a block from a block device?
- From: Dan Luedtke <maildanrl@xxxxxxxxxxxxxx>
RE: building linux kernel 3.0.4
- From: "Pritam Bankar" <pritambankar1988@xxxxxxxxx>
Re: Getting a block from a block device?
- From: mani <manishrma@xxxxxxxxx>
Re: Getting a block from a block device?
- From: Stephen Gream <poisonthemon@xxxxxxxxx>
Re: Getting a block from a block device?
- From: Alexandru Juncu <alex.juncu@xxxxxxxxxx>
Re: Getting a block from a block device?
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
Re: Getting a block from a block device?
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Getting a block from a block device?
- From: Dan Luedtke <maildanrl@xxxxxxxxxxxxxx>
Getting a block from a block device?
- From: Dan Luedtke <maildanrl@xxxxxxxxxxxxxx>
Mailing list for 802.15.4
- From: Prajosh Premdas <premdas.prajosh@xxxxxxxxx>
Re: building linux kernel 3.0.4
- From: Pritam Bankar <pritambankar1988@xxxxxxxxx>
building linux kernel 3.0.4
- From: ashish anand <ashishanand26cs@xxxxxxxxx>
Re: some questions about block and scatterlist
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: Contributing for the first time
- From: Daniel Baluta <dbaluta@xxxxxxxxxxx>
Re: some questions about block and scatterlist
- From: loody <miloody@xxxxxxxxx>
Re: Contributing for the first time
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Contributing for the first time
- From: Alexandru Juncu <alex.juncu@xxxxxxxxxx>
What's the meaning of PREEMPT_ACTIVE in preempt_count?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: Problem in configuring the kernel
- From: Naman Shekhar Mishra <mishra123.naman@xxxxxxxxx>
Re: Problem in configuring the kernel
- From: Greg KH <greg@xxxxxxxxx>
Problem in configuring the kernel
- From: Naman Shekhar Mishra <mishra123.naman@xxxxxxxxx>
Re: How to refer to the unamed structure in page struct
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: How to refer to the unamed structure in page struct
- From: Jimmy Pan <dspjm1@xxxxxxxxx>
Re: How to refer to the unamed structure in page struct
- From: Dave Hylands <dhylands@xxxxxxxxx>
How to refer to the unamed structure in page struct
- From: Jimmy Pan <dspjm1@xxxxxxxxx>
Re: The meaning of acronym of PIO in kernel?
- From: Leon Woestenberg <leon.woestenberg@xxxxxxxxx>
The meaning of acronym of PIO in kernel?
- From: loody <miloody@xxxxxxxxx>
Re: spin_lock behavior
- From: Prajosh Premdas <premdas.prajosh@xxxxxxxxx>
Re: why does the kernel use mutex to protect the address_space structure
- From: Jimmy Pan <dspjm1@xxxxxxxxx>
Re: when and how Notifier Chains calling?
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: Question on CDROM access
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: ext4 extents
- From: piyush moghe <pmkernel@xxxxxxxxx>
why does the kernel use mutex to protect the address_space structure
- From: Zheng Da <zhengda1936@xxxxxxxxx>
when and how Notifier Chains calling?
- From: vichy <vichy.kuo@xxxxxxxxx>
RE: spin_lock behavior
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
some questions about block and scatterlist
- From: loody <miloody@xxxxxxxxx>
Re: spin_lock behavior
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
spin_lock behavior
- From: Prajosh Premdas <premdas.prajosh@xxxxxxxxx>
Question on CDROM access
- From: sahlot arvind <asahlot@xxxxxxxxx>
spin_lock behavior
- From: Prajosh Premdas <premdas.prajosh@xxxxxxxxx>
Re: seagate drive and i/o errors
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
generic I/O
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: ext4 extents
- From: Mike Gibson <mike.gibson@xxxxxxxxxxxxxxxx>
Re: ext4 extents
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
ext4 extents
- From: Mike Gibson <mike.gibson@xxxxxxxxxxxxxxxx>
Re: Kernel Module from C program
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Kernel Module from C program
- From: Luis Morales <luisalfredo_ml31@xxxxxxxxxxx>
Re: Question on Memory Leak: very tough problem
- From: Bernd Petrovitsch <bernd@xxxxxxxxxxxxxxxxxxx>
Re: how to check kernel is configured with preemption or not
- From: Greg KH <greg@xxxxxxxxx>
Re: Question on Memory Leak: very tough problem
- From: Dave Hylands <dhylands@xxxxxxxxx>
Question on Memory Leak: very tough problem
- From: Sri Ram Vemulpali <sri.ram.gmu06@xxxxxxxxx>
Re: how to check kernel is configured with preemption or not
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: how to check kernel is configured with preemption or not
- From: sri <bskmohan@xxxxxxxxx>
Re: Workqueue and kernel panic on device disconnect
- From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
Workqueue and kernel panic on device disconnect
- From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
Fix procmail rule in ML wikipage
- From: chandanrmail@xxxxxxxxx
Re: Purpose of using __be16 inside a data structure?
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: Linux 0.02 version download
- From: Shaz <shazalive@xxxxxxxxx>
Re: Linux 0.02 version download
- From: Adam Lee <adam8157@xxxxxxxxx>
Re: Linux 0.02 version download
- From: Christophe Lucas <clucas@xxxxxxxxxx>
Re: Linux 0.02 version download
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
Re: Linux 0.02 version download
- From: bob <ilikepie420@xxxxxxxx>
Re: Is there a tool which can generate a small and simple source tree after config?
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
Re: Linux 0.02 version download
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
Re: Is there a way to build a cross reference with kernel file
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
Please help me about the default rootfs
- From: Renjun Qu <renjunqu.kernel@xxxxxxxxx>
Linux 0.02 version download
- From: Venkateswarlu P <p.venkatesh551@xxxxxxxxx>
Re: Is there a way to build a cross reference with kernel file
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: How to interpret cat /proc/meminfo
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Is there a tool which can generate a small and simple source tree after config?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Is there a way to build a cross reference with kernel file
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
Re: Purpose of using __be16 inside a data structure?
- From: "Kevin O'Gorman" <kogorman@xxxxxxxxx>
Re: how to check kernel is configured with preemption or not
- From: Sri Ram Vemulpali <sri.ram.gmu06@xxxxxxxxx>
some question about request queue in blok device
- From: loody <miloody@xxxxxxxxx>
Is there a way to build a cross reference with kernel file
- From: Jimmy Pan <dspjm1@xxxxxxxxx>
Re: How to avoid volatiles
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: how to check kernel is configured with preemption or not
- From: Greg KH <greg@xxxxxxxxx>
Re: how to check kernel is configured with preemption or not
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: I am hoping to develop the linux kernel, which version should I modify
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: I am hoping to develop the linux kernel, which version should I modify
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
I am hoping to develop the linux kernel, which version should I modify
- From: Jimmy Pan <dspjm1@xxxxxxxxx>
Re: how to check kernel is configured with preemption or not
- From: sri <bskmohan@xxxxxxxxx>
Re: Is there a tool which can generate a small and simple source tree after config?
- From: Aiolia Lea <casmyu@xxxxxxxxx>
Is there a tool which can generate a small and simple source tree after config?
- From: "jiangtao.jit" <jiangtao.jit@xxxxxxxxx>
Re: mmap local APIC address
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
seagate drive and i/o errors
- From: "Littlefield, Tyler" <tyler@xxxxxxxxxxxxx>
Re: how to check kernel is configured with preemption or not
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
Re: Problem with a UDP server implements
- From: tao jiang <jiangtao.jit@xxxxxxxxx>
how to check kernel is configured with preemption or not
- From: sri <bskmohan@xxxxxxxxx>
Re: Getting physical address of memory allocated by vmalloc()
- From: Dave Hylands <dhylands@xxxxxxxxx>
How to interpret cat /proc/meminfo
- From: sandeep kumar <coolsandyforyou@xxxxxxxxx>
Getting physical address of memory allocated by vmalloc()
- From: Jacky Lam <lamshuyin@xxxxxxxxx>
Re: mmap local APIC address
- From: bob <ilikepie420@xxxxxxxx>
Re: mmap local APIC address
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: Trouble removing character device
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: Understanding memcpy
- From: Kai Meyer <kai@xxxxxxxxxx>
RE: Getting 'bad file number' error writing to device driver
- From: "Philip Anil-QBW348" <anil.philip@xxxxxxxxxxxxxxxxxxxxx>
Re: Getting 'bad file number' error writing to device driver
- From: Mandeep Sandhu <mandeepsandhu.chd@xxxxxxxxx>
Re: Understanding memcpy
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Trouble removing character device
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Understanding memcpy
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: Trouble removing character device
- From: Kai Meyer <kai@xxxxxxxxxx>
Re: Trouble removing character device
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
Re: mmap local APIC address
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: mmap local APIC address
- From: bob <ilikepie420@xxxxxxxx>
Re: mmap local APIC address
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: How can I test if a physical address is already mapped or not.
- From: StephanT <stman937-linewbie@xxxxxxxxx>
Re: mmap local APIC address
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Trouble removing character device
- From: Kai Meyer <kai@xxxxxxxxxx>
RE: Getting 'bad file number' error writing to device driver
- From: "Philip Anil-QBW348" <anil.philip@xxxxxxxxxxxxxxxxxxxxx>
print contents of runqueue
- From: kashish bhatia <koolest77@xxxxxxxxx>
Re: Problem with a UDP server implements
- From: Bernd Petrovitsch <bernd@xxxxxxxxxxxxxxxxxxx>
Re: How can I test if a physical address is already mapped or not.
- From: Rajat Sharma <fs.rajat@xxxxxxxxx>
Re: a few questions regarding acpi and kernel configuration
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
RE: How can I test if a physical address is already mapped or not.
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: How can I test if a physical address is already mapped or not.
- From: StephanT <stman937-linewbie@xxxxxxxxx>
RE: How can I test if a physical address is already mapped or not.
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: How can I test if a physical address is already mapped or not.
- From: StephanT <stman937-linewbie@xxxxxxxxx>
a few questions regarding acpi and kernel configuration
- From: "Littlefield, Tyler" <tyler@xxxxxxxxxxxxx>
RE: How can I test if a physical address is already mapped or not.
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: How can I test if a physical address is already mapped or not.
- From: StephanT <stman937-linewbie@xxxxxxxxx>
RE: How can I test if a physical address is already mapped or not.
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: How can I test if a physical address is already mapped or not.
- From: StephanT <stman937-linewbie@xxxxxxxxx>
Re: Problem with a UDP server implements
- From: tao jiang <jiangtao.jit@xxxxxxxxx>
Re: Problem with a UDP server implements
- From: Bernd Petrovitsch <bernd@xxxxxxxxxxxxxxxxxxx>
Re: Heap memory is not re-claiming.
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Heap memory is not re-claiming.
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: How can I test if a physical address is already mapped or not.
- From: Rajat Sharma <fs.rajat@xxxxxxxxx>
Re: Heap memory is not re-claiming.
- From: "V.Ravikumar" <ravikumar.vallabhu@xxxxxxxxx>
Re: Problem with a UDP server implements
- From: tao jiang <jiangtao.jit@xxxxxxxxx>
How can I test if a physical address is already mapped or not.
- From: StephanT <stman937-linewbie@xxxxxxxxx>
Re: Linux System Calls vs writing device drivers
- From: Ashok Sharma <aks6d@xxxxxxxxxxx>
Re: Getting 'bad file number' error writing to device driver
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
RE: Getting 'bad file number' error writing to device driver
- From: "Philip Anil-QBW348" <anil.philip@xxxxxxxxxxxxxxxxxxxxx>
Question about USB gadget driver usage
- From: Mikhail Boiko <mikhailboiko85@xxxxxxxxx>
Re: calculating ring buffer size
- From: Greg KH <greg@xxxxxxxxx>
Re: sample USB Driver / Probe not getting called
- From: selvamuthukumar v <v.selvamuthukumar@xxxxxxxxx>
Re: power profiling ( /proc/acpi/processor .. missing)
- From: pankaj singh <psingh.ait@xxxxxxxxx>
Re: sample USB Driver / Probe not getting called
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Re: sample USB Driver / Probe not getting called
- From: selvamuthukumar v <v.selvamuthukumar@xxxxxxxxx>
calculating ring buffer size
- From: Amit Nagal <helloin.amit@xxxxxxxxx>
sample USB Driver / Probe not getting called
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
power profiling ( /proc/acpi/processor .. missing)
- From: pankaj singh <psingh.ait@xxxxxxxxx>
Re: Linux System Calls vs writing device drivers
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
why does the 'break_lock' field of spinlock exist for preemptive kernel?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
How to compile an older kernel?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: Heap memory is not re-claiming.
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: Query on Rx Frame processing
- From: michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Re: Linux System Calls vs writing device drivers
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: Problem with a UDP server implements
- From: Bernd Petrovitsch <bernd@xxxxxxxxxxxxxxxxxxx>
Query on Rx Frame processing
- From: amit mehta <gmate.amit@xxxxxxxxx>
Linux System Calls vs writing device drivers
- From: Ashok Sharma <aks6d@xxxxxxxxxxx>
Re: Problem with a UDP server implements
- From: tao jiang <jiangtao.jit@xxxxxxxxx>
Re: Problem with a UDP server implements
- From: michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Re: Getting 'bad file number' error writing to device driver
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
Re: Problem with a UDP server implements
- From: tao jiang <jiangtao.jit@xxxxxxxxx>
Re: Problem with a UDP server implements
- From: michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Re: mmap local APIC address
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Why can the kernel be stuck by a busy kernel thread ?
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: Heap memory is not re-claiming.
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
mmap local APIC address
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
RE: Getting 'bad file number' error writing to device driver
- From: "Philip Anil-QBW348" <anil.philip@xxxxxxxxxxxxxxxxxxxxx>
Problem with a UDP server implements
- From: "jiangtao.jit" <jiangtao.jit@xxxxxxxxx>
Re: Customized kernel and nVidia binary drivers
- From: Andrzej Kardas <andrzej-kardas@xxxxx>
Re: Why can the kernel be stuck by a busy kernel thread ?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: Why can the kernel be stuck by a busy kernel thread ?
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
Why can the kernel be stuck by a busy kernel thread ?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Customized kernel and nVidia binary drivers
- From: Cihangir Aktürk <cakturk@xxxxxxxxx>
Re: How to avoid volatiles
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: How to avoid volatiles
- From: Prabhakar Lad <prabhakar.csengg@xxxxxxxxx>
Re: How to avoid volatiles
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Fwd: How to avoid volatiles
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: [uml-user] Questions about User Mode Linux
- From: Bernd Petrovitsch <bernd@xxxxxxxxxxxxxxxxxxx>
Fwd: How to avoid volatiles
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: How to avoid volatiles
- From: Srivatsa Bhat <bhat.srivatsa@xxxxxxxxx>
Re: How to avoid volatiles
- From: Prabhakar Lad <prabhakar.csengg@xxxxxxxxx>
Re: How to avoid volatiles
- From: rohan puri <rohan.puri15@xxxxxxxxx>
How to avoid volatiles
- From: Prabhakar Lad <prabhakar.csengg@xxxxxxxxx>
Re: Heap memory is not re-claiming.
- From: pankaj singh <psingh.ait@xxxxxxxxx>
Re: Questions about User Mode Linux
- From: michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Re: Heap memory is not re-claiming.
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Getting 'bad file number' error writing to device driver
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
Getting 'bad file number' error writing to device driver
- From: "Philip Anil-QBW348" <anil.philip@xxxxxxxxxxxxxxxxxxxxx>
Re: Questions about User Mode Linux
- From: michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Re: ENOMEM failure on mmap call
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: ENOMEM failure on mmap call
- From: Ezequiel García <elezegarcia@xxxxxxxxxxxx>
Re: ENOMEM failure on mmap call
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: ENOMEM failure on mmap call
- From: Ezequiel García <elezegarcia@xxxxxxxxxxxx>
Re: Questions about User Mode Linux
- From: tao jiang <jiangtao.jit@xxxxxxxxx>
Re: Heap memory is not re-claiming.
- From: Jeff Donner <jeffrey.donner@xxxxxxxxx>
Re: Heap memory is not re-claiming.
- From: "V.Ravikumar" <ravikumar.vallabhu@xxxxxxxxx>
Re: Heap memory is not re-claiming.
- From: Jeff Donner <jeffrey.donner@xxxxxxxxx>
Heap memory is not re-claiming.
- From: "V.Ravikumar" <ravikumar.vallabhu@xxxxxxxxx>
Re: /proc/(PID)/maps (access permissions)
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: dma_alloc_coherent
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: ENOMEM failure on mmap call
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
/proc/(PID)/maps (access permissions)
- From: KenjiroNakayama <nakayamakennjirou@xxxxxxxxx>
dma_alloc_coherent
- From: bob jonny <ilikepie420@xxxxxxxx>
Re: Questions about User Mode Linux
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: Questions about User Mode Linux
- From: michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Re: Questions about User Mode Linux
- From: michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System scheduling, signals, etc.
- From: "dpc@xxxxxxxxxx" <dpc@xxxxxxxxxx>
Re: kernel version incorporating a particular feature
- From: Matt Schulte <matts@xxxxxxxxxxxxxxxxxxxx>
Re: kernel version incorporating a particular feature
- From: Jeff Kirsher <tarbal@xxxxxxxxx>
Re: kernel version incorporating a particular feature
- From: amit mehta <gmate.amit@xxxxxxxxx>
Re: kernel version incorporating a particular feature
- From: Jeff Kirsher <tarbal@xxxxxxxxx>
Questions about User Mode Linux
- From: "jiangtao.jit" <jiangtao.jit@xxxxxxxxx>
Re: kernel version incorporating a particular feature
- From: amit mehta <gmate.amit@xxxxxxxxx>
Re: kernel version incorporating a particular feature
- From: rohan puri <rohan.puri15@xxxxxxxxx>
kernel version incorporating a particular feature
- From: amit mehta <gmate.amit@xxxxxxxxx>
Re: File change notification along with user
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: File change notification along with user
- From: "V.Ravikumar" <ravikumar.vallabhu@xxxxxxxxx>
Re: File change notification along with user
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: File change notification along with user
- From: "V.Ravikumar" <ravikumar.vallabhu@xxxxxxxxx>
Re: File change notification along with user
- From: Abhijit Pawar <apawar.linux@xxxxxxxxx>
Re: Linux kernel networking stack
- From: amit mehta <gmate.amit@xxxxxxxxx>
Re: File change notification along with user
- From: "V.Ravikumar" <ravikumar.vallabhu@xxxxxxxxx>
RE: Linux kernel networking stack
- From: Smital Desai <Smital.Desai@xxxxxxxxxxxxxxx>
Re: Writing a USB driver for a non working device
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: Re Likely and Unlikely Macro
- From: pankaj singh <psingh.ait@xxxxxxxxx>
Re: ENOMEM failure on mmap call
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
RE: Linux kernel networking stack
- From: "Jeff Haran" <jharan@xxxxxxxxxxxxxx>
Re: Linux kernel networking stack
- From: Kernel Piddu <kernelpiddu@xxxxxxxxx>
Re: Linux kernel networking stack
- From: José Luis Segatto Junior <zuzesegatto@xxxxxxxxx>
Linux kernel networking stack
- From: Abu Rasheda <rcpilot2010@xxxxxxxxx>
Writing a USB driver for a non working device
- From: madav maddy <maddy.mdv007@xxxxxxxxx>
Re: Finding out when a process has died
- From: Bruce Rowen <browen@xxxxxxxxxxxx>
Re: kernel 5.5 kernel and tg3 driver
- From: amit mehta <gmate.amit@xxxxxxxxx>
Re: What is the significance of __releases & __acquires in rpm_callback() of power/runtime.c ?
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: Re Likely and Unlikely Macro
- From: Asutosh Das <das.asutosh@xxxxxxxxx>
Re: Finding out when a process has died
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Finding out when a process has died
- From: MK <stardust496@xxxxxxxxx>
ENOMEM failure on mmap call
- From: Ezequiel García <elezegarcia@xxxxxxxxxxxx>
Re: interpret the result of perf stat
- From: Zheng Da <zhengda1936@xxxxxxxxx>
Re: kernel 5.5 kernel and tg3 driver
- From: sri <bskmohan@xxxxxxxxx>
Re: Re Likely and Unlikely Macro
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: kernel 5.5 kernel and tg3 driver
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
What is the significance of __releases & __acquires in rpm_callback() of power/runtime.c ?
- From: venu <bvg_1@xxxxxxxxx>
Re: Re Likely and Unlikely Macro
- From: bob <ilikepie420@xxxxxxxx>
kernel 5.5 kernel and tg3 driver
- From: sri <bskmohan@xxxxxxxxx>
Re Likely and Unlikely Macro
- From: Asutosh Das <das.asutosh@xxxxxxxxx>
Re: userspace address to bus address
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: userspace address to bus address
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: Enabling USB OTG
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: interpret the result of perf stat
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: When is to preempt safe?
- From: michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Re: When is to preempt safe?
- From: michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Re: When is to preempt safe?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: When is to preempt safe?
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: When is to preempt safe?
- From: Michael Blizek <michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Re: When is to preempt safe?
- From: Michael Blizek <michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Re: interpret the result of perf stat
- From: Zheng Da <zhengda1936@xxxxxxxxx>
Re: When is to preempt safe?
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: When is to preempt safe?
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
Re: When is to preempt safe?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: When is to preempt safe?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: interpret the result of perf stat
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: When is to preempt safe?
- From: Michael Blizek <michi1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Re: problem mapping physical address from /dev/mem
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: When is to preempt safe?
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
Re: When is to preempt safe?
- From: Chetan Nanda <chetannanda@xxxxxxxxx>
Re: [lm-sensors] [PATCH] hwmon class driver registration with a device number
- From: Greg KH <greg@xxxxxxxxx>
Re: Why do processes with higher priority to be allocated more timeslice?
- From: Sri Ram Vemulpali <sri.ram.gmu06@xxxxxxxxx>
When is to preempt safe?
- From: Parmenides <mobile.parmenides@xxxxxxxxx>
Re: problem mapping physical address from /dev/mem
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: problem mapping physical address from /dev/mem
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: problem mapping physical address from /dev/mem
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: [lm-sensors] [PATCH] hwmon class driver registration with a device number
- From: Himanshu Chauhan <hschauhan@xxxxxxxxxxxxx>
Re: problem mapping physical address from /dev/mem
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
Re: [lm-sensors] [PATCH] hwmon class driver registration with a device number
- From: Greg KH <greg@xxxxxxxxx>
Re: problem mapping physical address from /dev/mem
- From: Arun KS <getarunks@xxxxxxxxx>
Re: [lm-sensors] [PATCH] hwmon class driver registration with a device number
- From: Himanshu Chauhan <hschauhan@xxxxxxxxxxxxx>
Re: problem mapping physical address from /dev/mem
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: How to open and write to a block driver within a character driver?
- From: Greg KH <greg@xxxxxxxxx>
Re: How to open and write to a block driver within a character driver?
- From: Greg Freemyer <greg.freemyer@xxxxxxxxx>
Re: problem mapping physical address from /dev/mem
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
RE: How to open and write to a block driver within a character driver?
- From: Yang Xiang <pointyx@xxxxxxxx>
Re: [PATCH] hwmon class driver registration with a device number
- From: Greg KH <greg@xxxxxxxxx>
Re: problem mapping physical address from /dev/mem
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
Re: understand the result of lockstat
- From: Zheng Da <zhengda1936@xxxxxxxxx>
Re: Current and correct CPU clock and asm("cpuid")
- From: Peter Senna Tschudin <peter.senna@xxxxxxxxx>
understand the result of lockstat
- From: Zheng Da <zhengda1936@xxxxxxxxx>
Re: interpret the result of perf stat
- From: Zheng Da <zhengda1936@xxxxxxxxx>
Re: [PATCH] hwmon class driver registration with a device number
- From: Himanshu Chauhan <hschauhan@xxxxxxxxxxxxx>
Re: [PATCH] hwmon class driver registration with a device number
- From: Himanshu Chauhan <hschauhan@xxxxxxxxxxxxx>
Re: [PATCH] hwmon class driver registration with a device number
- From: Greg KH <greg@xxxxxxxxx>
problem mapping physical address from /dev/mem
- From: Vaibhav Jain <vjoss197@xxxxxxxxx>
[PATCH] hwmon class driver registration with a device number
- From: Himanshu Chauhan <hschauhan@xxxxxxxxxxxxx>
Re: schedule history between 2 interrupts
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: how does linux restores a thread's stack pointer, program counter and return address.
- From: Dave Hylands <dhylands@xxxxxxxxx>
Re: How to open and write to a block driver within a character driver?
- From: Greg KH <greg@xxxxxxxxx>
RE: How to open and write to a block driver within a character driver?
- From: Yang Xiang <pointyx@xxxxxxxx>
Re: How to open and write to a block driver within a character driver?
- From: Greg KH <greg@xxxxxxxxx>
How to open and write to a block driver within a character driver?
- From: Yang Xiang <pointyx@xxxxxxxx>
Re: Current and correct CPU clock and asm("cpuid")
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: interpret the result of perf stat
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: interpret the result of perf stat
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: Current and correct CPU clock and asm("cpuid")
- From: Peter Senna Tschudin <peter.senna@xxxxxxxxx>
Re: how does linux restores a thread's stack pointer, program counter and return address.
- From: "Chauhan, Himanshu" <hschauhan@xxxxxxxxxxxxx>
Re: schedule history between 2 interrupts
- From: Philipp Ittershagen <p.ittershagen@xxxxxxxxxxxxxx>
schedule history between 2 interrupts
- From: Amit Nagal <helloin.amit@xxxxxxxxx>
how does linux restores a thread's stack pointer, program counter and return address.
- From: Smital Desai <Smital.Desai@xxxxxxxxxxxxxxx>
Re: Current and correct CPU clock and asm("cpuid")
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Current and correct CPU clock and asm("cpuid")
- From: Peter Senna Tschudin <peter.senna@xxxxxxxxx>
Re: Current and correct CPU clock and asm("cpuid")
- From: Peter Senna Tschudin <peter.senna@xxxxxxxxx>
Re: Current and correct CPU clock and asm("cpuid")
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: Kernelnewbies Digest, Vol 10, Issue 39
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: Kernelnewbies Digest, Vol 10, Issue 39
- From: chao peng <pengchao06@xxxxxxxxx>
Re: Getting dirtied pages info
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Re: Current and correct CPU clock and asm("cpuid")
- From: rohan puri <rohan.puri15@xxxxxxxxx>
Re: Getting dirtied pages info
- From: Peter Teoh <htmldeveloper@xxxxxxxxx>
Current and correct CPU clock and asm("cpuid")
- From: Peter Senna Tschudin <peter.senna@xxxxxxxxx>
Re: where's the linux-staging tree ?
- From: Greg KH <greg@xxxxxxxxx>
Re: where's the linux-staging tree ?
- From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
where's the linux-staging tree ?
- From: Víctor M. Jáquez L. <vjaquez@xxxxxxxxxx>
Re: Backtrace Call Stack
- From: Mulyadi Santosa <mulyadi.santosa@xxxxxxxxx>
interpret the result of perf stat
- From: Zheng Da <zhengda1936@xxxxxxxxx>

[Index of Archives] [Newbies FAQ] [Linux Kernel Mentors] [Linux Kernel Development] [IETF Annouce] [Git] [Networking] [Security] [Bugtraq] [Yosemite] [MIPS Linux] [ARM Linux] [Linux RAID] [Linux SCSI] [Linux ACPI]