Hi all When I take my two sonix-based webcams to my box, and started vlc on both I got <code> Aug 19 02:14:45 mixer kernel: [ 558.384176] ohci_hcd 0000:00:0b.0: leak ed f53dd580 (#81) state 2 [repeated many times...] Aug 19 02:14:45 mixer kernel: [ 558.406651] gspca: no transfer endpoint found </code> That with standard archlinux kernel 3.0 Linux mixer 3.0-ARCH #1 SMP PREEMPT Sat Aug 6 16:49:00 CEST 2011 i686 Mobile AMD Sempron(tm) Processor 3800+ AuthenticAMD GNU/Linux Also I got almost the same with my other box (kernel is hand-compiled) Linux di 3.0.1-pf-di #10 SMP PREEMPT Wed Aug 17 19:23:37 EEST 2011 x86_64 Intel (R) Core(TM)2 Duo CPU E8200 @ 2.66GHz GenuineIntel GNU/Linux Aug 18 23:36:37 di kernel: gspca: no transfer endpoint found Aug 18 23:36:38 di kernel: gspca: no transfer endpoint found Aug 18 23:37:22 di kernel: gspca: no transfer endpoint found Aug 18 23:37:23 di kernel: gspca: no transfer endpoint found With that (hand-compiled kernel) Linux belu4ka 2.6.38-pf7-nusq #1 SMP PREEMPT Thu May 5 11:27:48 EEST 2011 i686 Mobile AMD Sempron(tm) Processor 3800+ AuthenticAMD GNU/Linux I got Aug 19 00:30:13 belu4ka kernel: [ 353.140330] gspca: bandwidth not wide enough - trying again Aug 19 00:30:13 belu4ka kernel: [ 353.409184] ohci_hcd 0000:00:0b.0: leak ed f560c400 (#81) state 2 modules: gspca_sonixb 10863 0 gspca_main 19539 1 gspca_sonixb webcams: idVendor=0c45, idProduct=60b0 idVendor=0c45, idProduct=6029 The problem persists only when I make vlc show me both cams in the same time. Video from the first camera started still displayed, but the second cam is switched off. I wonder if somebody tell me if I should bugreport that and where to do that? I didn`t found anything similar to my problem in linux-usb, linux-video and linux-kernel lists? //D _______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
