Hi All, For a new storage hardware we have a Linux device driver that uses a custom library for hardware interface. This h/w interface library is an intellectual property. We want to share the Linux device driver source code, but not the library source code. 1) Is it possible to add to the Linux open source, such a driver along with the hardware interface library as a blob? Will the Linux kernel community accepts/approves it? 2) If so, what is the procedure involved? 3) Are there any additional documentation or any extra steps required than the normal way of submitting device drivers to Linux kernel community? Regards, Sahana ::DISCLAIMER:: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any mail and attachments please check them for viruses and defect. ----------------------------------------------------------------------------------------------------------------------- _______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
