Linux USB Users
[Prev Page][Next Page]
- Re: [PATCH v10 03/10] USB/ppc4xx: Add Synopsys DWC OTG Core Interface Layer (CIL)
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- [PATCH v2] usb gadget: fix all Section mismatch warnings
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
- RE: [PATCH v10 03/10] USB/ppc4xx: Add Synopsys DWC OTG Core Interface Layer (CIL)
- From: Tirumala Marri <tmarri@xxxxxxx>
- RE: [PATCH v10 02/10] USB/ppc4xx: Add Synopsys DWC OTG driver framework
- From: Tirumala Marri <tmarri@xxxxxxx>
- [RFT] usbcore: Bug fix: system can't suspend with USB3.0 device connected to USB3.0 hub
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: gadget: file_storage: don't assume wMaxPacketSize to be 512
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] usb: gadget: file_storage: don't assume wMaxPacketSize to be 512
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] usb: gadget: file_storage: don't assume wMaxPacketSize to be 512
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: gadget: file_storage: don't assume wMaxPacketSize to be 512
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH v3] usbnet: use eth%d name for known ethernet devices
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] usb: gadget: file_storage: don't assume wMaxPacketSize to be 512
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/7] mioa701: drop udc_is_connected
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
- Re: [PATCH 2/7] mioa701: drop udc_is_connected
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- [PATCH 7/7] gpio-vbus: ask for vbus_draw regulator before registering xceiv
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
- [PATCH 6/7] pxa25x: drop handling of udc_is_connected
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
- [PATCH 5/7] lubbock: switch to using lubbock_usb_xceiv transceiver
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
- [PATCH 4/7] pxa25x: separate lubbock handling to lubbock-usb transceiver
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
- [PATCH 3/7] stargate2: udc_is_connected is ignored for pxa27x, drop it
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
- [PATCH 2/7] mioa701: drop udc_is_connected
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
- [PATCH 1/7] balloon3: drop udc_is_connected
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
- Re: [PATCH] usb: gadget: file_storage: don't assume wMaxPacketSize to be 512
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [RFC] usb, ehci: repeated failover leaves leftover qh_next.ptr
- From: Don Zickus <dzickus@xxxxxxxxxx>
- Re: [PATCH] usb: gadget: file_storage: don't assume wMaxPacketSize to be 512
- From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
- [PATCH] usb: gadget: file_storage: don't assume wMaxPacketSize to be 512
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] usb: gadget: file_storage: don't assume wMaxPacketSize to be 512
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] usb: gadget: file_storage: don't assume wMaxPacketSize to be 512
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] usb: gadget: file_storage: don't assume wMaxPacketSize to be 512
- From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
- Re: [PATCH] usb: gadget: file_storage: don't assume wMaxPacketSize to be 512
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- [PATCH] usb: gadget: file_storage: don't assume wMaxPacketSize to be 512
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] usb: gadget: file_storage: don't assume wMaxPacketSize to be 512
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] usb: gadget: file_storage: don't assume wMaxPacketSize to be 512
- From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
- [PATCH] usb: gadget: file_storage: don't assume wMaxPacketSize to be 512
- From: Felipe Balbi <balbi@xxxxxx>
- RE: c67x00 driver
- From: "PEIXOTO Pierre" <ppeixoto@xxxxxxxxxxxxxxx>
- Re: [RFC] usb, ehci: repeated failover leaves leftover qh_next.ptr
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [RFC] usb, ehci: repeated failover leaves leftover qh_next.ptr
- From: Don Zickus <dzickus@xxxxxxxxxx>
- Re: c67x00 driver
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCHv2 0/4] usb: musb: dma support for u8500 and u5500 platforms
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] usbcore: Bug fix: system can't suspend with USB3.0 device connected to USB3.0 hub
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v6 0/5] usb gadget: Add SuperSpeed support to the Gadget Framework
- From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
- RE: c67x00 driver
- From: "PEIXOTO Pierre" <ppeixoto@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: musb: USB Test Mode control from sysfs
- From: Felipe Balbi <balbi@xxxxxx>
- Re: c67x00 gadget support?
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- RE: [PATCH] usb: musb: USB Test Mode control from sysfs
- From: Praveena NADAHALLY <praveen.nadahally@xxxxxxxxxxxxxx>
- RE: [PATCH] usb: musb: USB Test Mode control from sysfs
- From: Gerald BAEZA <gerald.baeza@xxxxxxxxxxxxxx>
- Re: [PATCHv2 0/4] usb: musb: dma support for u8500 and u5500 platforms
- From: Mian Yousaf Kaukab <mian.yousaf.kaukab@xxxxxxxxxxxxxx>
- RE: [PATCH 1/2 v2] usb: otg: OMAP4430: Fixing the omap4430_phy_init function
- From: Hema Kalliguddi <hemahk@xxxxxx>
- [PATCH] usbcore: Bug fix: system can't suspend with USB3.0 device connected to USB3.0 hub
- From: Andiry Xu <andiry.xu@xxxxxxx>
- [PATCH v2] USB: musb: blackfin: work around anomaly 05000450
- From: Mike Frysinger <vapier@xxxxxxxxxx>
- Re: [uclinux-dist-devel] [PATCH] USB: musb: blackfin: work around anomaly 05000450
- From: Mike Frysinger <vapier@xxxxxxxxxx>
- Re: [PATCH/RFC] usb gadget: fix all Section mismatch warnings
- From: Michal Nazarewicz <mina86@xxxxxxx>
- [PATCH/RFC] usb gadget: fix all Section mismatch warnings
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
- c67x00 gadget support?
- From: John Williams <john.williams@xxxxxxxxxxxxx>
- [PATCH 2/7] USB: xhci: unsigned char never equals -1
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 4/7] USB: xhci - remove excessive 'inline' markings
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 6/7] USB: xhci - fix math in xhci_get_endpoint_interval()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 5/7] USB: xhci: simplify logic of skipping missed isoc TDs
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 7/7] xhci: Fix NULL pointer deref in handle_port_status()
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 3/7] USB: fix formatting of SuperSpeed endpoints in /proc/bus/usb/devices
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 1/7] USB: xhci - fix unsafe macro definitions
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 0/7] Bug fixes and clean up for 2.6.39
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: possible error in xhci-ring.c
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 5/5] xhci: Remove recursive call to xhci_handle_event
- From: Matt Evans <matt@xxxxxxxxxx>
- possible error in xhci-ring.c
- From: wfp5p@xxxxxxxxxxxxxxxxxxxxxxxxx (Bill Pemberton)
- Re: Gobi 3000
- From: Elly Jones <ellyjones@xxxxxxxxxx>
- Re: [PATCH 1/2 v2] usb: otg: OMAP4430: Fixing the omap4430_phy_init function
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] usb: musb: USB Test Mode control from sysfs
- From: Felipe Balbi <balbi@xxxxxx>
- RE: [PATCH] usb: musb: USB Test Mode control from sysfs
- From: Praveena NADAHALLY <praveen.nadahally@xxxxxxxxxxxxxx>
- Re: usb gadget Section mismatch warnings
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
- Re: [PATCH] usb: musb: USB Test Mode control from sysfs
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] usb: musb: USB Test Mode control from sysfs
- From: Felipe Balbi <balbi@xxxxxx>
- RE: SCSI_START_STOP_UNIT implementation question
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usbcore: Bug fix: USB3.0 device behind a USB3.0 hub can not suspend
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH 0/5] USB3 hub support refine
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: usb gadget Section mismatch warnings
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/5] USB3 hub support refine
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: ehci scan_periodic loop time
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: ehci scan_periodic loop time
- From: Ming Lei <tom.leiming@xxxxxxxxx>
- Re: [PATCH] usb: musb: USB Test Mode control from sysfs
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- RE: [PATCH] usb: musb: USB Test Mode control from sysfs
- From: Keshava Munegowda <keshava_mgowda@xxxxxx>
- Re: [uclinux-dist-devel] [PATCH] USB: musb: blackfin: work around anomaly 05000450
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH] usb: musb: USB Test Mode control from sysfs
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH] pl25a1_support
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH v2 1/2] isp1704_charger: allow board specific powering routine
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- RE: ehci scan_periodic loop time
- From: bradhuang <bradhuang@xxxxxxxxxxxxxx>
- RE: [PATCH] usb: musb: USB Test Mode control from sysfs
- From: Keshava Munegowda <keshava_mgowda@xxxxxx>
- Re: [PATCH] usb: musb: USB Test Mode control from sysfs
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: [PATCH] pl25a1_support
- From: David Miller <davem@xxxxxxxxxxxxx>
- [PATCH] usb: musb: USB Test Mode control from sysfs
- From: Praveena Nadahally <praveen.nadahally@xxxxxxxxxxxxxx>
- RE: SCSI_START_STOP_UNIT implementation question
- From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
- RE: [PATCH v2 5/5] xhci: Remove recursive call to xhci_handle_event
- From: "David Laight" <David.Laight@xxxxxxxxxx>
- [PATCH] usbcore: Bug fix: USB3.0 device behind a USB3.0 hub can not suspend
- From: Andiry Xu <andiry.xu@xxxxxxx>
- RE: [PATCH 0/5] USB3 hub support refine
- From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
- RE: [PATCH v3 2/2] RX-51: Enable isp1704 power on/off
- From: <kalle.jokiniemi@xxxxxxxxx>
- RE: [PATCH v3 2/2] RX-51: Enable isp1704 power on/off
- From: Keshava Munegowda <keshava_mgowda@xxxxxx>
- RE: [PATCH v3 2/2] RX-51: Enable isp1704 power on/off
- From: <kalle.jokiniemi@xxxxxxxxx>
- RE: [PATCH v3 2/2] RX-51: Enable isp1704 power on/off
- From: Keshava Munegowda <keshava_mgowda@xxxxxx>
- Re: Did the problem of g_serial "scheduling while atomic bug" fixed?
- From: sword li <sword.l.dragon@xxxxxxxxx>
- Re: Did the problem of g_serial "scheduling while atomic bug" fixed?
- From: Maulik Mankad <mankad.maulik@xxxxxxxxx>
- Re: [PATCH v3 2/2] RX-51: Enable isp1704 power on/off
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxx>
- Re: [PATCH v3 1/2] isp1704_charger: allow board specific powering routine
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxx>
- Did the problem of g_serial "scheduling while atomic bug" fixed?
- From: sword li <sword.l.dragon@xxxxxxxxx>
- [PATCH] pl25a1_support
- From: Simon Wood <simon@xxxxxxxxxxxxx>
- usb gadget Section mismatch warnings
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
- Re: [PATCH v2 3/5] xhci: Add rmb() between reading event validity & event data access.
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/5] USB3 hub support refine
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [39/45] OHCI: work around for nVidia shutdown problem
- From: "Andre \"Osku\" Schmidt" <andre.osku.schmidt@xxxxxxxxxxxxxx>
- Re: [PATCH v2 5/5] xhci: Remove recursive call to xhci_handle_event
- From: Dmitry Torokhov <dtor@xxxxxxxxxx>
- Re: hid_ntrig prevents suspend from working
- From: Adar Dembo <adembo@xxxxxxxxx>
- Re: [PATCH resend] xHCI: Implement AMD PLL quirk
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/5] xhci: Add rmb() between reading event validity & event data access.
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v2 5/5] xhci: Remove recursive call to xhci_handle_event
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [39/45] OHCI: work around for nVidia shutdown problem
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [39/45] OHCI: work around for nVidia shutdown problem
- From: "Andre \"Osku\" Schmidt" <andre.osku.schmidt@xxxxxxxxxxxxxx>
- Re: [uclinux-dist-devel] [PATCH] USB: musb: blackfin: work around anomaly 05000450
- From: Mike Frysinger <vapier@xxxxxxxxxx>
- Re: [PATCH 5/5 v2] usbcore: Refine USB3.0 device suspend and resume
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 4/5 v2] xHCI: report USB3.0 portstatus comply with USB3.0 specification
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: ehci scan_periodic loop time
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/5] USB3 hub support refine
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [39/45] OHCI: work around for nVidia shutdown problem
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH v3 2/2] RX-51: Enable isp1704 power on/off
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- [PATCH v3 1/2] isp1704_charger: allow board specific powering routine
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- [PATCH v3 0/2] isp1704_charger: fix powering for N900
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- Re: [GIT PATCH 2/3 (2nd draft)] Resend : Fix memory leak in qcserial driver
- From: Aristeu Rozanski <aris@xxxxxxxxxx>
- Re: [PATCH v10 10/10] USB ppc4xx: Add Synopsys DWC OTG driver kernel configuration and Makefile
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- option_instat_callback: error -71 -- solution
- From: Roland Koebler <r.koebler@xxxxxxxx>
- Re: [PATCH v10 09/10] USB/ppc4xx:Synopsys DWC OTG driver enable gadget support
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [GIT PATCH 2/3 (2nd draft)] Resend : Fix memory leak in qcserial driver
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [GIT PATCH 2/3] Resend : Fix memory leak in qcserial driver
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH] mfd: Fix usbhs_enable error handling
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] USB: musb: blackfin: work around anomaly 05000450
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- RE: [PATCH v10 00/10] Add-Synopsys-DesignWare-HS-USB-OTG-driver
- From: Keshava Munegowda <keshava_mgowda@xxxxxx>
- RE: [PATCH v10 04/10] USB/ppc4xx: Add Synopsys DWC OTG HCD function
- From: Keshava Munegowda <keshava_mgowda@xxxxxx>
- RE: [PATCH v10 03/10] USB/ppc4xx: Add Synopsys DWC OTG Core Interface Layer (CIL)
- From: Keshava Munegowda <keshava_mgowda@xxxxxx>
- RE: [PATCH v10 02/10] USB/ppc4xx: Add Synopsys DWC OTG driver framework
- From: Keshava Munegowda <keshava_mgowda@xxxxxx>
- RE: [PATCH] mfd: Fix usbhs_enable error handling
- From: Keshava Munegowda <keshava_mgowda@xxxxxx>
- query: ICCD/CCID kernel driver availability
- From: Praveena Nadahally <nadahally.praveena@xxxxxxxxx>
- RE: [PATCH 2.6.38 1/1] ftdi_sio: Added IDs for CTI USB Serial Devices
- From: Keshava Munegowda <keshava_mgowda@xxxxxx>
- RE: [PATCH 1/2 v2] usb: otg: OMAP4430: Fixing the omap4430_phy_init function
- From: Hema Kalliguddi <hemahk@xxxxxx>
- Re: normal disconnect-reconnect loop?
- From: Oliver Neukum <oneukum@xxxxxxx>
- RE: [PATCH v2 1/2] isp1704_charger: allow board specific powering routine
- From: <kalle.jokiniemi@xxxxxxxxx>
- normal disconnect-reconnect loop?
- From: James <bjlockie@xxxxxxxxx>
- [PATCH 5/5 v2] usbcore: Refine USB3.0 device suspend and resume
- From: Andiry Xu <andiry.xu@xxxxxxx>
- [PATCH 1/5 v2] xHCI: warm reset support
- From: Andiry Xu <andiry.xu@xxxxxxx>
- [PATCH 3/5 v2] xHCI: Set link state support
- From: Andiry Xu <andiry.xu@xxxxxxx>
- [PATCH 4/5 v2] xHCI: report USB3.0 portstatus comply with USB3.0 specification
- From: Andiry Xu <andiry.xu@xxxxxxx>
- [PATCH 2/5 v2] xHCI: Clear link state change support
- From: Andiry Xu <andiry.xu@xxxxxxx>
- [PATCH 0/5 v2] USB3 hub support refine
- From: Andiry Xu <andiry.xu@xxxxxxx>
- [PATCH v3 4/4] xhci: Remove recursive call to xhci_handle_event
- From: Matt Evans <matt@xxxxxxxxxx>
- [PATCH v3 3/4] xhci: Add an assertion to check for virt_dev=0 bug.
- From: Matt Evans <matt@xxxxxxxxxx>
- [PATCH v3 2/4] xhci: Add rmb() between reading event validity & event data access.
- From: Matt Evans <matt@xxxxxxxxxx>
- [PATCH v3 1/4] xhci: Make xHCI driver endian-safe
- From: Matt Evans <matt@xxxxxxxxxx>
- [PATCH v3 0/4] xhci: Make xHCI driver endian-safe
- From: Matt Evans <matt@xxxxxxxxxx>
- RE: [PATCH resend] xHCI: Implement AMD PLL quirk
- From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
- Re: [PATCH 2/5] xhci: Extend debug messages
- From: Matt Evans <matt@xxxxxxxxxx>
- Re: [PATCH 0/5] Make xHCI driver endian-safe, add a barrier, some debug
- From: Matt Evans <matt@xxxxxxxxxx>
- RE: ehci scan_periodic loop time
- From: bradhuang <bradhuang@xxxxxxxxxxxxxx>
- RE: [PATCH 0/5] USB3 hub support refine
- From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
- Re: [PATCH v2 5/5] xhci: Remove recursive call to xhci_handle_event
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/5] USB3 hub support refine
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 5/5] xhci: Remove recursive call to xhci_handle_event
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH 4/5] xhci: Add an assertion to check for virt_dev=0 bug.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/5] xhci: Add rmb() between reading event validity & event data access.
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/5] xhci: Extend debug messages
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [GIT PATCH 2/3 (2nd draft)] Resend : Fix memory leak in qcserial driver
- From: Steven Hardy <shardy@xxxxxxxxxx>
- Re: [PATCH 0/5] Make xHCI driver endian-safe, add a barrier, some debug
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [39/45] OHCI: work around for nVidia shutdown problem
- From: "Andre \"Osku\" Schmidt" <andre.osku.schmidt@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2 v2] usb: otg: OMAP4430: Fixing the omap4430_phy_init function
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/2] usb: otg: OMAP4430: Fix omap4430_phy_init function
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2.6.38 1/1] ftdi_sio: Added IDs for CTI USB Serial Devices
- From: Christian Simon <simon@xxxxxxxx>
- Re: [GIT PATCH] Fix memory leak in qcserial driver
- From: Steven Hardy <shardy@xxxxxxxxxx>
- Re: [PATCH 2.6.38 1/1] ftdi_sio: Added IDs for CTI USB Serial Devices
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH 2.6.38 1/1] ftdi_sio: Added IDs for CTI USB Serial Devices
- From: Christian Simon <simon@xxxxxxxx>
- Re: [PATCH V9 10/10] USB ppc4xx: Add Synopsys DWC OTG driver kernel configuration and Makefile
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH v10 09/10] USB/ppc4xx:Synopsys DWC OTG driver enable gadget support
- From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
- [PATCH v10 04/10] USB/ppc4xx: Add Synopsys DWC OTG HCD function
- [PATCH v10 03/10] USB/ppc4xx: Add Synopsys DWC OTG Core Interface Layer (CIL)
- [PATCH v10 08/10] USB ppc4xx: Add Synopsys DWC OTG PCD interrupt function
- [PATCH v10 01/10] USB/ppc4xx: Add Synopsys DWC OTG Register definitions
- [PATCH v10 07/10] USB/ppc4xx: Add Synopsys DWC OTG PCD function
- [PATCH v10 05/10] USB/ppc4xx: Add Synopsys DWC OTG HCD interrupt function
- [PATCH v10 02/10] USB/ppc4xx: Add Synopsys DWC OTG driver framework
- [PATCH v10 06/10] USB/ppc4xx: Add Synopsys DWC OTG HCD queue function
- [PATCH v10 10/10] USB ppc4xx: Add Synopsys DWC OTG driver kernel configuration and Makefile
- [PATCH v10 09/10] USB/ppc4xx:Synopsys DWC OTG driver enable gadget support
- [PATCH v10 00/10] Add-Synopsys-DesignWare-HS-USB-OTG-driver
- Re: [39/45] OHCI: work around for nVidia shutdown problem
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH V9 10/10] USB ppc4xx: Add Synopsys DWC OTG driver kernel configuration and Makefile
- From: Greg KH <greg@xxxxxxxxx>
- Re: [GIT PATCH] Fix memory leak in qcserial driver
- From: Aristeu Rozanski <aris@xxxxxxxxxx>
- Re: [GIT PATCH] Fix memory leak in qcserial driver
- From: Steven Hardy <shardy@xxxxxxxxxx>
- [GIT PATCH 3/3] Resend : Fix memory leak in qcserial driver
- From: Steven Hardy <shardy@xxxxxxxxxx>
- Re: [PATCH V9 10/10] USB ppc4xx: Add Synopsys DWC OTG driver kernel configuration and Makefile
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- [GIT PATCH 2/3] Resend : Fix memory leak in qcserial driver
- From: Steven Hardy <shardy@xxxxxxxxxx>
- Re: [GIT PATCH] Fix memory leak in qcserial driver
- From: Aristeu Rozanski <aris@xxxxxxxxxx>
- [GIT PATCH 1/3] Resend : Fix memory leak in qcserial driver
- From: Steven Hardy <shardy@xxxxxxxxxx>
- RE: [PATCH V9 10/10] USB ppc4xx: Add Synopsys DWC OTG driver kernel configuration and Makefile
- From: Tirumala Marri <tmarri@xxxxxxx>
- [PATCH] USB: musb: blackfin: work around anomaly 05000450
- From: Mike Frysinger <vapier@xxxxxxxxxx>
- Re: [PATCH 2.6.37.4 1/1] ftdi_sio: Added IDs for CTI USB Serial Devices
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH 2.6.37.4 1/1] ftdi_sio: Added IDs for CTI USB Serial Devices
- From: Christian Simon <simon@xxxxxxxx>
- RE: ehci scan_periodic loop time
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: ehci scan_periodic loop time
- From: bradhuang <bradhuang@xxxxxxxxxxxxxx>
- [PATCH -next RESEND] usb: fix isp1760-hcd printk format warning
- From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
- RE: ehci scan_periodic loop time
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Initialization of musb on board-omap2beagle fails in platform_driver_probe
- From: Ben Gamari <bgamari.foss@xxxxxxxxx>
- Re: Unbuildable kernel with musb
- From: Ben Gamari <bgamari@xxxxxxxxx>
- Re: [GIT PATCH] Fix memory leak in qcserial driver
- From: Greg KH <gregkh@xxxxxxx>
- [GIT PATCH] Fix memory leak in qcserial driver
- From: Steven Hardy <shardy@xxxxxxxxxx>
- Re: [PATCH] g_file_storage: don't send padding when stall=n
- From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
- Re: [Bug #28562] [BUG] usb problems in .38-rc3+
- From: Ed Tomlinson <edt@xxxxxx>
- Re: musb: handling Blackfin anomaly 05000450
- From: Felipe Balbi <balbi@xxxxxx>
- Re: musb: handling Blackfin anomaly 05000450
- From: Mike Frysinger <vapier.adi@xxxxxxxxx>
- Re: musb: handling Blackfin anomaly 05000450
- From: Felipe Balbi <balbi@xxxxxx>
- Re: musb: handling Blackfin anomaly 05000450
- From: Mike Frysinger <vapier.adi@xxxxxxxxx>
- Re: musb: handling Blackfin anomaly 05000450
- From: Felipe Balbi <balbi@xxxxxx>
- RE: [PATCH v2 1/2] isp1704_charger: allow board specific powering routine
- From: <kalle.jokiniemi@xxxxxxxxx>
- RE: [PATCH v2 2/2] RX-51: Enable isp1704 power on/off
- From: <kalle.jokiniemi@xxxxxxxxx>
- Re: musb: handling Blackfin anomaly 05000450
- From: Mike Frysinger <vapier.adi@xxxxxxxxx>
- RE: [PATCH v2 1/2] isp1704_charger: allow board specific powering routine
- From: <kalle.jokiniemi@xxxxxxxxx>
- Re: musb: handling Blackfin anomaly 05000450
- From: Felipe Balbi <balbi@xxxxxx>
- Re: musb: handling Blackfin anomaly 05000450
- From: Mike Frysinger <vapier.adi@xxxxxxxxx>
- Re: musb: handling Blackfin anomaly 05000450
- From: Mike Frysinger <vapier.adi@xxxxxxxxx>
- Re: musb: handling Blackfin anomaly 05000450
- From: Felipe Balbi <balbi@xxxxxx>
- RE: [PATCH 5/5 v5] usb:gadget: Add SuperSpeed support to the Gadget Framework
- From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] isp1704_charger: allow board specific powering routine
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxx>
- musb: handling Blackfin anomaly 05000450
- From: Mike Frysinger <vapier.adi@xxxxxxxxx>
- RE: [PATCH v2 2/2] RX-51: Enable isp1704 power on/off
- From: <kalle.jokiniemi@xxxxxxxxx>
- Re: [PATCH v2 2/2] RX-51: Enable isp1704 power on/off
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 5/5 v5] usb:gadget: Add SuperSpeed support to the Gadget Framework
- From: Felipe Balbi <balbi@xxxxxx>
- RE: [PATCH v2 2/2] RX-51: Enable isp1704 power on/off
- From: <kalle.jokiniemi@xxxxxxxxx>
- Re: [PATCH 2/5 v6] usb: Add usb_endpoint_descriptor to be part of the struct usb_ep
- From: Felipe Balbi <balbi@xxxxxx>
- RE: [PATCH 5/5 v5] usb:gadget: Add SuperSpeed support to the Gadget Framework
- From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
- Re: [PATCH 1/5 v8] usb: Adding SuperSpeed support to dummy_hcd
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v2 2/2] RX-51: Enable isp1704 power on/off
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v2 2/2] RX-51: Enable isp1704 power on/off
- From: Felipe Balbi <balbi@xxxxxx>
- Re: Initialization of musb on board-omap2beagle fails in platform_driver_probe
- From: Felipe Balbi <balbi@xxxxxx>
- Re: Unbuildable kernel with musb
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v2 2/2] RX-51: Enable isp1704 power on/off
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH v2 1/2] isp1704_charger: allow board specific powering routine
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- RE: [PATCH v2 2/2] RX-51: Enable isp1704 power on/off
- From: <kalle.jokiniemi@xxxxxxxxx>
- Re: [Bug #28562] [BUG] usb problems in .38-rc3+
- From: Oliver Neukum <oneukum@xxxxxxx>
- RE: [PATCH v2 2/2] RX-51: Enable isp1704 power on/off
- From: Keshava Munegowda <keshava_mgowda@xxxxxx>
- [PATCH v2 1/2] isp1704_charger: allow board specific powering routine
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- [PATCH v2 0/2] isp1704_charger: fix powering for N900
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- [PATCH v2 2/2] RX-51: Enable isp1704 power on/off
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- RE: [PATCH 0/2] isp1704_charger: fix powering for N900
- From: <kalle.jokiniemi@xxxxxxxxx>
- [PATCH 1/2] isp1704_charger: allow board specific powering routine
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- [PATCH 2/2] RX-51: Enable isp1704 power on/off
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- [PATCH 0/2] isp1704_charger: fix powering for N900
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- [PATCH v2 5/5] xhci: Remove recursive call to xhci_handle_event
- From: Matt Evans <matt@xxxxxxxxxx>
- [PATCH v2 3/5] xhci: Add rmb() between reading event validity & event data access.
- From: Matt Evans <matt@xxxxxxxxxx>
- Re: [Bug #28562] [BUG] usb problems in .38-rc3+
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [Bug #28562] [BUG] usb problems in .38-rc3+
- From: Chuck Ebbert <cebbert@xxxxxxxxxx>
- RE: [PATCH 2/5 v6] usb: Add usb_endpoint_descriptor to be part of the struct usb_ep
- From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
- RE: [PATCH 1/5 v8] usb: Adding SuperSpeed support to dummy_hcd
- From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
- RE: ehci scan_periodic loop time
- From: bradhuang <bradhuang@xxxxxxxxxxxxxx>
- Re: [patch] HID: fix a tab problem
- From: Jiri Kosina <jkosina@xxxxxxx>
- Initialization of musb on board-omap2beagle fails in platform_driver_probe
- From: Ben Gamari <bgamari@xxxxxxxxx>
- Unbuildable kernel with musb
- From: Ben Gamari <bgamari@xxxxxxxxx>
- Re: USB protocol help (STALL and NAKs)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [patch] HID: fix a tab problem
- From: Dan Carpenter <error27@xxxxxxxxx>
- Re: usb3 and support for the TI controller
- From: Dwight Schauer <dschauer@xxxxxx>
- Re: [PATCH 3/5] xhci: Add rmb() between reading event validity & event data access.
- From: "Segher Boessenkool" <segher@xxxxxxxxxxxxxxxxxxx>
- Re: usb3 and support for the TI controller
- From: "Benjamin David Lunt" <zfysz@xxxxxxxxxx>
- Re: USB protocol help (STALL and NAKs)
- From: Arvid Brodin <arvid.brodin@xxxxxxxx>
- Re: usb3 and support for the TI controller
- From: Joshua Scoggins <theoretically.x64@xxxxxxxxx>
- Re: usb3 and support for the TI controller
- From: Don Zickus <dzickus@xxxxxxxxxx>
- Re: usb3 and support for the TI controller
- From: Joshua Scoggins <theoretically.x64@xxxxxxxxx>
- usb3 and support for the TI controller
- From: Don Zickus <dzickus@xxxxxxxxxx>
- Re: [PATCHv3] usb: core: Change usb_create_sysfs_intf_files()' return type to void
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: ehci scan_periodic loop time
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Alexey Orishko <alexey.orishko@xxxxxxxxx>
- RE: ehci scan_periodic loop time
- From: BradHuang <bradhuang@xxxxxxxxxxx>
- RE: ehci scan_periodic loop time
- From: BradHuang <bradhuang@xxxxxxxxxxx>
- RE: ehci scan_periodic loop time
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] g_file_storage: don't send padding when stall=n
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb: usb_storage: do not align length of request for CBW to maxp size
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: about debugfs functions
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCHv2] usb: core: Change usb_create_sysfs_intf_files()' return type to void
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: about debugfs functions
- From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
- Re: [PATCH 4/5] xHCI: report USB3.0 portstatus comply with USB3.0 specification
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: about debugfs functions
- From: loody <miloody@xxxxxxxxx>
- Re: about debugfs functions
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: ehci scan_periodic loop time
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: ehci scan_periodic loop time
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB protocol help (STALL and NAKs)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/5 v8] usb: Adding SuperSpeed support to dummy_hcd
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 2/5 v6] usb: Add usb_endpoint_descriptor to be part of the struct usb_ep
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 5/5 v5] usb:gadget: Add SuperSpeed support to the Gadget Framework
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 1/5] xHCI: warm reset support
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH] USB: remove dead code from usb_deregister_dev()
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH 5/5] xhci: Remove recursive call to xhci_handle_event
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCHv2] usb: core: Change usb_create_sysfs_intf_files()' return type to void
- From: Michal Nazarewicz <mnazarewicz@xxxxxxxxxx>
- Re: [PATCH] USB storage: Fix coding style
- From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
- Re: TTY loosing data with u_serial gadget
- From: Felipe Balbi <balbi@xxxxxx>
- [GIT PULL] MUSB patches
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] USB storage: Fix coding style
- From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
- RE: [PATCH] USB storage: Fix coding style
- From: Sistemas Neurowork <sistemas@xxxxxxxxxxxxx>
- [PATCH 16/16][v2] USB: cdc-acm: re-write read processing
- From: Johan Hovold <jhovold@xxxxxxxxx>
- RE: [PATCH] USB storage: Fix coding style
- From: Keshava Munegowda <keshava_mgowda@xxxxxx>
- [PATCH 5/5] usbcore: Refine USB3.0 device suspend and resume
- From: Andiry Xu <andiry.xu@xxxxxxx>
- [PATCH 4/5] xHCI: report USB3.0 portstatus comply with USB3.0 specification
- From: Andiry Xu <andiry.xu@xxxxxxx>
- [PATCH 3/5] xHCI: Set link state support
- From: Andiry Xu <andiry.xu@xxxxxxx>
- [PATCH 2/5] xHCI: PLC clear support
- From: Andiry Xu <andiry.xu@xxxxxxx>
- [PATCH 1/5] xHCI: warm reset support
- From: Andiry Xu <andiry.xu@xxxxxxx>
- [PATCH 0/5] USB3 hub support refine
- From: Andiry Xu <andiry.xu@xxxxxxx>
- [PATCH] USB storage: Fix coding style
- From: Sistemas Neurowork <sistemas@xxxxxxxxxxxxx>
- [PATCH v2] USB: remove dead code from usb_deregister_dev()
- From: Libor Pechacek <lpechacek@xxxxxxx>
- Re: [PATCH] USB: remove dead code from usb_deregister_dev()
- From: Libor Pechacek <lpechacek@xxxxxxx>
- Re: about debugfs functions
- From: loody <miloody@xxxxxxxxx>
- [PATCH 5/5] xhci: Remove recursive call to xhci_handle_event
- From: Matt Evans <matt@xxxxxxxxxx>
- [PATCH 4/5] xhci: Add an assertion to check for virt_dev=0 bug.
- From: Matt Evans <matt@xxxxxxxxxx>
- [PATCH 3/5] xhci: Add rmb() between reading event validity & event data access.
- From: Matt Evans <matt@xxxxxxxxxx>
- [PATCH 2/5] xhci: Extend debug messages
- From: Matt Evans <matt@xxxxxxxxxx>
- [PATCH 1/5] xhci: Make xHCI driver endian-safe
- From: Matt Evans <matt@xxxxxxxxxx>
- [PATCH 0/5] Make xHCI driver endian-safe, add a barrier, some debug
- From: Matt Evans <matt@xxxxxxxxxx>
- RE: [PATCH 1/2] usb: otg: OMAP4430: Fix omap4430_phy_init function
- From: Hema Kalliguddi <hemahk@xxxxxx>
- Re: [ANNOUNCE] usbmon capture and parser script
- From: Micah Elizabeth Scott <micah@xxxxxxxxxx>
- Re: [ANNOUNCE] usbmon capture and parser script
- From: Micah Elizabeth Scott <micah@xxxxxxxxxx>
- USB protocol help (STALL and NAKs)
- From: Arvid Brodin <arvid.brodin@xxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Andy Green <andy@xxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Alexey Orishko <alexey.orishko@xxxxxxxxx>
- Re: ehci pci runtime pm question
- From: jacob pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
- Re: [PATCH] i2c/busses: Driver for Devantech USB-ISS I2C adapter
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH 11/12] USB: cdc-acm: fix potential null-pointer dereference
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 09/12] USB: Fix 'bad dma' problem on WDM device disconnect
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 12/12] USB: cdc-acm: fix potential null-pointer dereference on disconnect
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 08/12] usb: wwan: fix compilation without CONFIG_PM_RUNTIME
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 10/12] USB: cdc-acm: fix memory corruption / panic
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 07/12] USB: uss720 fixup refcount position
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 06/12] usb: musb: blackfin: fix typo in new bfin_musb_vbus_status func
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 05/12] usb: musb: blackfin: fix typo in new dev_pm_ops struct
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 03/12] usb: musb: Fix for merge issue
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 04/12] usb: musb: blackfin: fix typo in platform driver name
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 02/12] ehci-hcd: Bug fix: don't set a QH's Halt bit
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 01/12] USB: Do not pass negative length to snoop_urb()
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [GIT PATCH] USB fixes for .39
- From: Greg KH <gregkh@xxxxxxx>
- Re: TTY loosing data with u_serial gadget
- From: Toby Gray <toby.gray@xxxxxxxxxxx>
- Re: [PATCH] usb: core: Change usb_create_sysfs_intf_files()' return type to void
- From: "Michal Nazarewicz" <mnazarewicz@xxxxxxxxxx>
- Re: [PATCH] usb: core: Change usb_create_sysfs_intf_files()' return type to void
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: TTY loosing data with u_serial gadget
- From: Stefan Bigler <stefan.bigler@xxxxxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH] usb: core: Change usb_create_sysfs_intf_files()' return type to void
- From: Michal Nazarewicz <mnazarewicz@xxxxxxxxxx>
- Re: check device_create_file() return code in usb_create_sysfs_intf_files()
- From: Sergey Senozhatsky <sergey.senozhatsky@xxxxxxxxx>
- Re: check device_create_file() return code in usb_create_sysfs_intf_files()
- From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
- Re: check device_create_file() return code in usb_create_sysfs_intf_files()
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: check device_create_file() return code in usb_create_sysfs_intf_files()
- From: Sergey Senozhatsky <sergey.senozhatsky@xxxxxxxxx>
- Re: check device_create_file() return code in usb_create_sysfs_intf_files()
- From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
- check device_create_file() return code in usb_create_sysfs_intf_files()
- From: Sergey Senozhatsky <sergey.senozhatsky@xxxxxxxxx>
- RE: ehci scan_periodic loop time
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: ehci pci runtime pm question
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Andy Green <andy@xxxxxxxxxxx>
- Re: [PATCH] usb: musb: blackfin: fix typo in platform driver name
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] USB: remove dead code from usb_deregister_dev()
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- [PATCH] USB: remove dead code from usb_deregister_dev()
- From: Libor Pechacek <lpechacek@xxxxxxx>
- Re: [PATCH 1/2] usb: otg: OMAP4430: Fix omap4430_phy_init function
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: TTY loosing data with u_serial gadget
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: TTY loosing data with u_serial gadget
- From: Toby Gray <toby.gray@xxxxxxxxxxx>
- Re: TTY loosing data with u_serial gadget
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v2] usb: usb_storage: do not align length of request for CBW to maxp size
- From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
- Re: TTY loosing data with u_serial gadget
- From: Toby Gray <toby.gray@xxxxxxxxxxx>
- [PATCH 2/2 v2] usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 1/2 v2] usb: otg: OMAP4430: Fixing the omap4430_phy_init function
- From: Hema HK <hemahk@xxxxxx>
- RE: [PATCH 1/2] usb: otg: OMAP4430: Fix omap4430_phy_init function
- From: Hema Kalliguddi <hemahk@xxxxxx>
- [PATCH v2] usb: usb_storage: do not align length of request for CBW to maxp size
- From: Mian Yousaf Kaukab <mian.yousaf.kaukab@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: otg: OMAP4430: Fix omap4430_phy_init function
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 2/2] usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 1/2] usb: otg: OMAP4430: Fix omap4430_phy_init function
- From: Hema HK <hemahk@xxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Andy Green <andy@xxxxxxxxxxx>
- Re: [uclinux-dist-devel] MUSB Reorganization does not like modules
- From: Felipe Balbi <balbi@xxxxxx>
- Re: ehci pci runtime pm question
- From: Ming Lei <tom.leiming@xxxxxxxxx>
- [PATCH] USB: xhci - fix math in xhci_get_endpoint_interval()
- From: Dmitry Torokhov <dtor@xxxxxxxxxx>
- Re: [PATCH] i2c/busses: Driver for Devantech USB-ISS I2C adapter
- From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
- [PATCH v2] USB: xhci: simplify logic of skipping missed isoc TDs
- From: Dmitry Torokhov <dtor@xxxxxxxxxx>
- Re: [PATCH] USB: xhci: simplify logic of skipping missed isoc TDs
- From: Dmitry Torokhov <dtor@xxxxxxxxxx>
- RE: Possible issue in hub.c
- From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
- Re: [PATCH] USB: xhci: simplify logic of skipping missed isoc TDs
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Ben Hutchings <bhutchings@xxxxxxxxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Steve Calfee <stevecalfee@xxxxxxxxx>
- Re: [PATCH] USB: xhci: simplify logic of skipping missed isoc TDs
- From: Dmitry Torokhov <dtor@xxxxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Michal Nazarewicz <mnazarewicz@xxxxxxxxx>
- ehci pci runtime pm question
- From: jacob pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
- [PATCH RESEND v3 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH RESEND 2/4] ARM: S3C24XX: Add plaform device definition for USB High-Speed gadget controller.
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH RESEND 1/4] ARM: S3C2416: Add USB Phy register definitions
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH RESEND 0/4] USB: gadget: Add Samsung S3C24xx USB HS controller driver
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH RESEND 4/4] ARM: S3C2416: Add support for USB 2.0 High-Speed gadget controller
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH] USB: xhci: simplify logic of skipping missed isoc TDs
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: Any USB gadget AIO interface users?
- From: Jeff Moyer <jmoyer@xxxxxxxxxx>
- [PATCH] dbgp gadget: fix return value of dbgp_setup
- From: Sven Schnelle <svens@xxxxxxxxxxxxxx>
- [PATCH] dbgp gadget: set MaxpacketSize0
- From: Sven Schnelle <svens@xxxxxxxxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: Any USB gadget AIO interface users?
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: Possible issue in hub.c
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Greg KH <greg@xxxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: David Anders <x0132446@xxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC] usbnet: use eth%d name for known ethernet devices
- From: Andy Green <andy@xxxxxxxxxxx>
- [RFC] usbnet: use eth%d name for known ethernet devices
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH v2] fsl_qe_udc: send ZLP when zero flag and length % maxpacket == 0
- From: Valentin Longchamp <valentin.longchamp@xxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Andy Green <andy@xxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH v2 2/3] usb: gadget: file_storage: Make CD-ROM emulation work with Mac OS-X
- From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] i2c/busses: Driver for Devantech USB-ISS I2C adapter
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH] i2c/busses: Driver for Devantech USB-ISS I2C adapter
- From: Greg KH <greg@xxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Andy Green <andy@xxxxxxxxxxx>
- Re: ehci scan_periodic loop time
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/3] usb: gadget: file_storage: Make CD-ROM emulation work with Mac OS-X
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: debugging a modern laptop ...
- From: Mark Lord <kernel@xxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
- Re: [PATCH] i2c/busses: Driver for Devantech USB-ISS I2C adapter
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH] i2c/busses: Driver for Devantech USB-ISS I2C adapter
- From: Greg KH <greg@xxxxxxxxx>
- Re: debugging a modern laptop ...
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [uclinux-dist-devel] MUSB Reorganization does not like modules
- From: Mike Frysinger <vapier@xxxxxxxxxx>
- Re: [PATCH 1/2] usb: usb_storage: do not align length of request for CBW to maxp size
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
- [PATCH] dbpg gadget: dont mask out direction bit
- From: Sven Schnelle <svens@xxxxxxxxxxxxxx>
- Re: Any USB gadget AIO interface users?
- From: Jeff Moyer <jmoyer@xxxxxxxxxx>
- Re: [PATCH] i2c/busses: Driver for Devantech USB-ISS I2C adapter
- From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
- Re: [PATCH] i2c/busses: Driver for Devantech USB-ISS I2C adapter
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] i2c/busses: Driver for Devantech USB-ISS I2C adapter
- From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
- ehci scan_periodic loop time
- From: bradhuang <bradhuang@xxxxxxxxxxxxxx>
- Re: [PATCH] USB: cdc-acm: Prevent data loss when filling tty buffer.
- From: Toby Gray <toby.gray@xxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Andy Green <andy@xxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Andy Green <andy@xxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Andy Green <andy@xxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Andy Green <andy@xxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: MUSB Reorganization does not like modules
- From: Felipe Balbi <balbi@xxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Andy Green <andy@xxxxxxxxxxx>
- Re: [PATCH] i2c/busses: Driver for Devantech USB-ISS I2C adapter
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] i2c/busses: Driver for Devantech USB-ISS I2C adapter
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [PATCH v2 2/3] usb: gadget: file_storage: Make CD-ROM emulation work with Mac OS-X
- From: Roger Quadros <roger.quadros@xxxxxxxxx>
- [PATCH 5/5 v5] usb:gadget: Add SuperSpeed support to the Gadget Framework
- From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
- [PATCH 4/5 v6] usb: Modify existing gadget drivers to use config_ep_by_speed() instead of ep_choose.
- From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
- [PATCH/RESEND 3/5 v4] usb: Configure endpoint according to gadget speed.
- From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
- [PATCH 2/5 v6] usb: Add usb_endpoint_descriptor to be part of the struct usb_ep
- From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
- [PATCH 1/5 v8] usb: Adding SuperSpeed support to dummy_hcd
- From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
- [PATCH v6 0/5] usb gadget: Add SuperSpeed support to the Gadget Framework
- From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
- RE: Possible issue in hub.c
- From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
- Re: [PATCH] i2c/busses: Driver for Devantech USB-ISS I2C adapter
- From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
- RE: [PATCH v2] usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled
- From: Hema Kalliguddi <hemahk@xxxxxx>
- Re: [PATCH] i2c/busses: Driver for Devantech USB-ISS I2C adapter
- From: Bernhard Walle <bernhard@xxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH] i2c/busses: Driver for Devantech USB-ISS I2C adapter
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH] i2c/busses: Driver for Devantech USB-ISS I2C adapter
- From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
- Re: debugging a modern laptop ...
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- debugging a modern laptop ...
- From: Herbert Poetzl <herbert@xxxxxxxxxxxx>
- Re: [PATCH] i2c/busses: Driver for Devantech USB-ISS I2C adapter
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH] i2c/busses: Driver for Devantech USB-ISS I2C adapter
- From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: lsusb apparent bogosity
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Andy Green <andy@xxxxxxxxxxx>
- Re: cdc_acm and sam_ba support the same device
- From: Greg KH <greg@xxxxxxxxx>
- Re: lsusb apparent bogosity
- From: Greg KH <greg@xxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: lsusb apparent bogosity
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Andy Green <andy@xxxxxxxxxxx>
- [PATCH] USB: sl811: add Kconfig option for ISOCHRONOUS mode
- From: Mike Frysinger <vapier@xxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Jaswinder Singh <jaswinder.singh@xxxxxxxxxx>
- MUSB Reorganization does not like modules
- From: Mike Frysinger <vapier@xxxxxxxxxx>
- [PATCH] usb: musb: blackfin: fix typo in platform driver name
- From: Mike Frysinger <vapier@xxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Andy Green <andy@xxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Jaswinder Singh <jaswinder.singh@xxxxxxxxxx>
- Re: [PATCH v2] USB: cdc-acm: Prevent data loss when filling tty buffer.
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Any USB gadget AIO interface users?
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: usb-serial gadget -- windows xp not working
- From: Greg KH <greg@xxxxxxxxx>
- Re: TTY loosing data with u_serial gadget
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH 00/16] USB: cdc-acm: bug fixes, clean-ups, and new read implementation
- From: Johan Hovold <jhovold@xxxxxxxxx>
- Re: [PATCH 00/16] USB: cdc-acm: bug fixes, clean-ups, and new read implementation
- From: Greg KH <gregkh@xxxxxxx>
- Re: cdc_acm and sam_ba support the same device
- From: Johan Hovold <jhovold@xxxxxxxxx>
- [PATCH 1/2] usb: usb_storage: do not align length of request for CBW to maxp size
- From: Mian Yousaf Kaukab <mian.yousaf.kaukab@xxxxxxxxxxxxxx>
- [PATCH 2/2] usb: usb_storage: do not set short_not_ok when short packet is expected
- From: Mian Yousaf Kaukab <mian.yousaf.kaukab@xxxxxxxxxxxxxx>
- Re: RFC: Platform data for onboard USB assets
- From: Andy Green <andy@xxxxxxxxxxx>
[Index of Archives]
[Linux USB Devel (old)]
[Linux Input]
[Linux SCSI]
[Samba]
[Yosemite News]