Hello.
On 28-03-2011 22:28, tmarri@xxxxxxx wrote:
From: Tirumala Marri <tmarri@xxxxxxx>
Enable gadget support
Signed-off-by: Tirumala R Marri <tmarri@xxxxxxx>
Signed-off-by: Fushen Chen <fchen@xxxxxxx>
Signed-off-by: Mark Miesfeld <mmiesfeld@xxxxxxx>
[...]
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index bc5123c..61aca75 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -365,6 +365,28 @@ config USB_GADGET_MUSB_HDRC
This OTG-capable silicon IP is used in dual designs including
the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
+# dwc_otg builds in ../dwc_otg along with host support
There's no ../dwc_otg any longer.
+config USB_GADGET_DWC_HDRC
+ boolean "DesignWare USB Peripheral"
+ depends on DWC_OTG_MODE || DWC_DEVICE_ONLY
+ select USB_GADGET_DUALSPEED
+ select USB_GADGET_SELECTED
+ select USB_GADGET_DWC_OTG
+ help
+ This OTG-capable Designware USB IP
+
+config USB_GADGET_DWC_OTG
+ boolean "OTG Support"
+ depends on USB_GADGET_DWC_HDRC
Not on DWC_OTG_MODE? How this option is different from DWC_OTG_MODE?
+ help
+ The most notable feature of USB OTG is support for a
+ "Dual-Role" device, which can act as either a device
+ or a host. The initial role choice can be changed
+ later, when two dual-role devices talk to each other.
+ Select this only if your board has a Mini-AB connector.
+
+
+
Too many empty lines.
config USB_GADGET_M66592
boolean "Renesas M66592 USB Peripheral Controller"
select USB_GADGET_DUALSPEED
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
