Linux USB Users
[Prev Page][Next Page]
- [PATCH v2 02/35] lib/find: add test for atomic find_bit() ops
- From: Yury Norov <yury.norov@xxxxxxxxx>
- [PATCH v2 01/35] lib/find: add atomic find_bit() primitives
- From: Yury Norov <yury.norov@xxxxxxxxx>
- [PATCH v2 00/35] bitops: add atomic find_bit() operations
- From: Yury Norov <yury.norov@xxxxxxxxx>
- Re: [PATCH V3 1/3] dt-bindings: usb: xhci: add support for BCM2711
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: Regression: Inoperative bluetooth, Intel chipset, mainline kernel 6.6.2+
- From: Basavaraj Natikar <bnatikar@xxxxxxx>
- Re: Regression: Inoperative bluetooth, Intel chipset, mainline kernel 6.6.2+
- From: Basavaraj Natikar <bnatikar@xxxxxxx>
- [PATCH RESEND 6/6] usb: typec: qcom-pmic-typec: switch to DRM_AUX_HPD_BRIDGE
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH RESEND 5/6] soc: qcom: pmic-glink: switch to DRM_AUX_HPD_BRIDGE
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH RESEND 4/6] drm/bridge: implement generic DP HPD bridge
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH RESEND 1/6] drm/bridge: add transparent bridge helper
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH RESEND 3/6] usb: typec: nb7vpq904m: switch to DRM_AUX_BRIDGE
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH RESEND 2/6] phy: qcom: qmp-combo: switch to DRM_AUX_BRIDGE
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH RESEND 0/6] drm: simplify support for transparent DRM bridges
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH V3 1/3] dt-bindings: usb: xhci: add support for BCM2711
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH V3 1/3] dt-bindings: usb: xhci: add support for BCM2711
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: Regression: Inoperative bluetooth, Intel chipset, mainline kernel 6.6.2+
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: Regression: Inoperative bluetooth, Intel chipset, mainline kernel 6.6.2+
- From: "Kris Karas (Bug Reporting)" <bugs-a21@xxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: dwc2: write HCINT with INTMASK applied
- From: Andrea della Porta <aporta@xxxxxxx>
- [PATCH] r8152: add vendor/device ID pair for ASUS USB-C2500
- From: Kelly Kane <kelly@xxxxxxxxxxxxxxxx>
- [PATCH V3 1/3] dt-bindings: usb: xhci: add support for BCM2711
- From: Stefan Wahren <wahrenst@xxxxxxx>
- [PATCH V3 0/3] ARM: dts: bcm2711: Add BCM2711 xHCI support
- From: Stefan Wahren <wahrenst@xxxxxxx>
- [PATCH V3 3/3] ARM: dts: bcm2711: Add BCM2711 xHCI support
- From: Stefan Wahren <wahrenst@xxxxxxx>
- [PATCH V3 2/3] usb: xhci: xhci-plat: Add support for BCM2711
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [PATCH v2 2/3] usb: core: Allow subclassed USB drivers to override usb_choose_configuration()
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [PATCH] Revert "xhci: add quirk for host controllers that don't update endpoint DCS"
- From: Shengyu Qu <wiagn233@xxxxxxxxxxx>
- RE: [PATCH 08/19] xhci: dbc: Use sizeof_field() where it makes sense
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: [PATCH v2] usb: gadget: f_fs: Add the missing get_alt callback
- From: John Keeping <john@xxxxxxxxxxxxx>
- Re: Regression: Inoperative bluetooth, Intel chipset, mainline kernel 6.6.2+
- From: "Kris Karas (Bug Reporting)" <bugs-a21@xxxxxxxxxxxxxxxx>
- Re: Regression: Inoperative bluetooth, Intel chipset, mainline kernel 6.6.2+
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: Regression: Inoperative bluetooth, Intel chipset, mainline kernel 6.6.2+
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: Regression: Inoperative bluetooth, Intel chipset, mainline kernel 6.6.2+
- From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
- Re: [PATCH net v2 3/3] r8152: Choose our USB config with choose_configuration() rather than probe()
- From: Grant Grundler <grundler@xxxxxxxxxxxx>
- Re: [PATCH v2 1/3] usb: core: Don't force USB generic_subclass drivers to define probe()
- From: Grant Grundler <grundler@xxxxxxxxxxxx>
- Re: [PATCH] usb: dwc3: don't reset device side if dwc3 was configured as host-only
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH v2] usb: storage: sddr55: clean up variable type
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [RESEND PATCH v2 3/3] usb: misc: onboard_usb_hub: Add support for Cypress CY7C6563x
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v3] net: usb: ax88179_178a: avoid failed operations when device is disconnected
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [RESEND PATCH v2 2/3] usb: misc: onboard_usb_hub: Add support for clock input
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH v2 2/3] usb: core: Allow subclassed USB drivers to override usb_choose_configuration()
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/3] usb: core: Don't force USB generic_subclass drivers to define probe()
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RESEND PATCH v2 1/3] usb: misc: onboard_usb_hub: Print symbolic error names
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH 08/19] xhci: dbc: Use sizeof_field() where it makes sense
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: core: Save the config when a device is deauthorized+authorized
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 2/3] usb: core: Allow subclassed USB drivers to override usb_choose_configuration()
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH net v2 3/3] r8152: Choose our USB config with choose_configuration() rather than probe()
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 1/3] usb: core: Don't force USB generic_subclass drivers to define probe()
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2 0/3] net: usb: r8152: Fix lost config across deauthorize+authorize
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- Re: Bug in add_dma_entry()'s debugging code
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: [PATCH V2 0/2] ARM: dts: bcm2711: Add generic xHCI
- From: Cyril Brulebois <kibi@xxxxxxxxxx>
- RE: [PATCH 08/19] xhci: dbc: Use sizeof_field() where it makes sense
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: [PATCH v3] net: usb: ax88179_178a: avoid failed operations when device is disconnected
- From: Jose Ignacio Tornos Martinez <jtornosm@xxxxxxxxxx>
- Re: [PATCH V2 1/2] dt-bindings: usb: xhci: Add optional power-domains
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: Bug in add_dma_entry()'s debugging code
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb: storage: sddr55: clean up variable type
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
- Re: [PATCH v3] usb: hub: Add quirk to decrease IN-ep poll interval for Microchip USB491x hub
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3] net: usb: ax88179_178a: avoid failed operations when device is disconnected
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: core: Save the config when a device is deauthorized+authorized
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH 19/19] xhci: fix possible null pointer deref during xhci urb enqueue
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 17/19] xhci: minor coding style cleanup in 'xhci_try_enable_msi()'
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 18/19] xhci: Reconfigure endpoint 0 max packet size only during endpoint reset
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 16/19] xhci: rework 'xhci_try_enable_msi()' MSI and MSI-X setup code
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 15/19] xhci: change 'msix_count' to encompass MSI or MSI-X vectors
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 14/19] xhci: refactor static MSI function
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 13/19] xhci: refactor static MSI-X function
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 12/19] xhci: add handler for only one interrupt line
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 11/19] xhci: check if legacy irq is available before using it as fallback
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 10/19] xhci: dbc: Add missing headers
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 09/19] xhci: dbc: Use sizeof(*pointer) instead of sizeof(type)
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 08/19] xhci: dbc: Use sizeof_field() where it makes sense
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 07/19] xhci: dbc: Replace custom return value with proper Linux error code
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 06/19] xhci: dbc: Don't shadow error codes in store() functions
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 05/19] xhci: dbc: Check for errors first in xhci_dbc_stop()
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 04/19] xhci: dbc: Use ATTRIBUTE_GROUPS()
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 03/19] xhci: dbc: Use sysfs_emit() to instead of scnprintf()
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 02/19] xhci: dbc: Convert to use sysfs_streq()
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 01/19] xhci: dbc: Drop duplicate checks for dma_free_coherent()
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 00/19] xhci features for usb-next
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH v2] usb: gadget: f_fs: Add the missing get_alt callback
- From: Hardik Gajjar <hgajjar@xxxxxxxxxxxxxx>
- [PATCH v3] usb: hub: Add quirk to decrease IN-ep poll interval for Microchip USB491x hub
- From: Hardik Gajjar <hgajjar@xxxxxxxxxxxxxx>
- Re: [PATCH v3] usb: typec: class: fix typec_altmode_put_partner to put plugs
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v3] net: usb: ax88179_178a: avoid failed operations when device is disconnected
- From: Jose Ignacio Tornos Martinez <jtornosm@xxxxxxxxxx>
- RE: [RFC PATCH 1/3] dt-binding: usb: ulpi-phy: add ulpi-phy binding
- From: "Mehta, Piyush" <piyush.mehta@xxxxxxx>
- Re: [PATCH v2] net: usb: ax88179_178a: avoid failed operations when device is disconnected
- From: Greg KH <greg@xxxxxxxxx>
- Re: Bug in add_dma_entry()'s debugging code
- From: Ferry Toth <ferry.toth@xxxxxxxxxxxx>
- Re: [PATCH] USB: typec: tps6598x: use device 'type' field to identify devices
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v2] net: usb: ax88179_178a: avoid failed operations when device is disconnected
- From: Jose Ignacio Tornos Martinez <jtornosm@xxxxxxxxxx>
- Re: Bug in add_dma_entry()'s debugging code
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: [PATCH] USB: typec: tps6598x: use device 'type' field to identify devices
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH] net: usb: ax88179_178a: avoid failed operations when device is disconnected
- From: Jose Ignacio Tornos Martinez <jtornosm@xxxxxxxxxx>
- Re: [PATCH] USB: dwc2: write HCINT with INTMASK applied
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: [RFC] USB: check for transmissible packet sizes when matching endpoints
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] usb: dwc3: don't reset device side if dwc3 was configured as host-only
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [PATCH] USB: typec: tps6598x: use device 'type' field to identify devices
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH] USB: serial: option: add Foxconn T99W265 with new baseline
- From: Slark Xiao <slark_xiao@xxxxxxx>
- [PATCH] usb: core: Save the config when a device is deauthorized+authorized
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v3] usbip: Don't submit special requests twice
- From: Simon Holesch <simon@xxxxxxxxxx>
- [PATCH] CDC-NCM: add support for Apple iDevices
- From: Ole André Vadla Ravnås <oleavr@xxxxxxxx>
- Re: [PATCH] CDC-NCM: add support for Apple iDevices
- From: Ole André Vadla Ravnås <oleavr@xxxxxxxx>
- [PATCH] CDC-NCM: add support for Apple iDevices
- From: Ole André Vadla Ravnås <oleavr@xxxxxxxx>
- Re: [RFC] USB: check for transmissible packet sizes when matching endpoints
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Bug in add_dma_entry()'s debugging code
- From: Ferry Toth <fntoth@xxxxxxxxx>
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH V2 2/2] ARM: dts: bcm2711: Add generic xHCI
- From: Justin Chen <justin.chen@xxxxxxxxxxxx>
- Re: [RFC] USB: check for transmissible packet sizes when matching endpoints
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH] net: usb: ax88179_178a: avoid failed operations when device is disconnected
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH V2 2/2] ARM: dts: bcm2711: Add generic xHCI
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH V2 1/2] dt-bindings: usb: xhci: Add optional power-domains
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH] net: usb: ax88179_178a: avoid failed operations when device is disconnected
- From: Jose Ignacio Tornos Martinez <jtornosm@xxxxxxxxxx>
- Re: [RFC] USB: check for transmissible packet sizes when matching endpoints
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: return type of usb_endpoint_maxp()
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCHv2] USB: gl620a: check for rx buffer overflow
- From: Simon Horman <horms@xxxxxxxxxx>
- Re: [PATCH v2] usb: hub: Add quirk to decrease IN-ep poll interval for Microchip USB491x hub
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] net: usb: ax88179_178a: avoid failed operations when device is disconnected
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH V2 1/2] dt-bindings: usb: xhci: Add optional power-domains
- From: Stefan Wahren <wahrenst@xxxxxxx>
- [PATCH V2 0/2] ARM: dts: bcm2711: Add generic xHCI
- From: Stefan Wahren <wahrenst@xxxxxxx>
- [PATCH V2 2/2] ARM: dts: bcm2711: Add generic xHCI
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: question on correct error return from break_ctl()
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 3/5] usb: fotg210-hcd: Replace snprintf() with the safer scnprintf() variant
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: question on correct error return from break_ctl()
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH 3/5] usb: fotg210-hcd: Replace snprintf() with the safer scnprintf() variant
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: question on correct error return from break_ctl()
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: question on correct error return from break_ctl()
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: typec: tps6598x: use device 'type' field to identify devices
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- question on correct error return from break_ctl()
- From: Oliver Neukum <oneukum@xxxxxxxx>
- [RFC] USB: check for transmissible packet sizes when matching endpoints
- From: Oliver Neukum <oneukum@xxxxxxxx>
- return type of usb_endpoint_maxp()
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH] usb: gadget: f_fs: Add the missing get_alt callback
- From: Hardik Gajjar <hgajjar@xxxxxxxxxxxxxx>
- [PATCH 5/5] usb: gadget: f_tcm: Remove snprintf() from sysfs call-backs and replace with sysfs_emit()
- From: Lee Jones <lee@xxxxxxxxxx>
- [PATCH 4/5] usb: gadget: Remove snprintf() from sysfs call-backs and replace with sysfs_emit()
- From: Lee Jones <lee@xxxxxxxxxx>
- [PATCH 3/5] usb: fotg210-hcd: Replace snprintf() with the safer scnprintf() variant
- From: Lee Jones <lee@xxxxxxxxxx>
- [PATCH 2/5] usb: cdnsp: Replace snprintf() with the safer scnprintf() variant
- From: Lee Jones <lee@xxxxxxxxxx>
- [PATCH 1/5] usb: atm: Remove snprintf() from sysfs call-backs and replace with sysfs_emit()
- From: Lee Jones <lee@xxxxxxxxxx>
- [PATCH 0/5] usb: Replace {v}snprintf() variants with safer alternatives
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH] USB: typec: tps6598x: use device 'type' field to identify devices
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCHv2] USB: gl620a: check for rx buffer overflow
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH] USB: typec: tps6598x: use device 'type' field to identify devices
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- [PATCH v2] usb: hub: Add quirk to decrease IN-ep poll interval for Microchip USB491x hub
- From: Hardik Gajjar <hgajjar@xxxxxxxxxxxxxx>
- Re: [PATCH] net: usb: ax88179_178a: avoid failed operations when device is disconnected
- From: Jose Ignacio Tornos Martinez <jtornosm@xxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Johan Hovold <johan@xxxxxxxxxx>
- RE: [PATCH net v3 3/5] r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash()
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- RE: [PATCH net v3 4/5] r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- RE: [PATCH net v3 5/5] r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en()
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- RE: [PATCH net v3 2/5] r8152: Add RTL8152_INACCESSIBLE checks to more loops
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v5 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH net v2 2/5] r8152: Add RTL8152_INACCESSIBLE checks to more loops
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH net v3 5/5] r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en()
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH net v3 4/5] r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH net v3 3/5] r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash()
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH net v3 1/5] r8152: Hold the rtnl_lock for all of reset
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH net v3 2/5] r8152: Add RTL8152_INACCESSIBLE checks to more loops
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH] usb: storage: freecom: drop useless assignment in init_freecom()
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v3] usb: typec: class: fix typec_altmode_put_partner to put plugs
- From: RD Babiera <rdbabiera@xxxxxxxxxx>
- Re: [PATCH] USB: typec: tps6598x: use device 'type' field to identify devices
- From: Alexandru Ardelean <alex@xxxxxxxxxxx>
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH] net: usb: ax88179_178a: avoid failed operations when device is disconnected
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] net: usb: ax88179_178a: avoid failed operations when device is disconnected
- From: Oliver Neukum <oneukum@xxxxxxxx>
- [PATCH] net: usb: ax88179_178a: avoid failed operations when device is disconnected
- From: Jose Ignacio Tornos Martinez <jtornosm@xxxxxxxxxx>
- Re: [RFT PATCH 1/2] xhci: Reconfigure endpoint 0 max packet size only during endpoint reset
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH] USB: typec: tps6598x: use device 'type' field to identify devices
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- RE: [PATCH net v2 2/5] r8152: Add RTL8152_INACCESSIBLE checks to more loops
- From: Hayes Wang <hayeswang@xxxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v3] USB: gadget: core: adjust uevent timing on gadget unbind
- From: Roy Luo <royluo@xxxxxxxxxx>
- Re: [PATCH v2] USB: gadget: core: adjust uevent timing on gadget unbind
- From: Roy Luo <royluo@xxxxxxxxxx>
- [usb:usb-testing] BUILD SUCCESS 24af68a0ed53629bdde7b53ef8c2be72580d293b
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH net v2 5/5] r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en()
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH net v2 4/5] r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH net v2 3/5] r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash()
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH net v2 2/5] r8152: Add RTL8152_INACCESSIBLE checks to more loops
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH net v2 1/5] r8152: Hold the rtnl_lock for all of reset
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- [PATCH AUTOSEL 4.14 7/7] net: usb: qmi_wwan: claim interface 4 for ZTE MF290
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.19 10/10] net: usb: qmi_wwan: claim interface 4 for ZTE MF290
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.4 11/11] net: usb: qmi_wwan: claim interface 4 for ZTE MF290
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.4 01/11] usb: aqc111: check packet for fixup for true limit
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.10 13/13] net: usb: qmi_wwan: claim interface 4 for ZTE MF290
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.10 01/13] usb: aqc111: check packet for fixup for true limit
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.15 15/15] net: usb: qmi_wwan: claim interface 4 for ZTE MF290
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.15 01/15] usb: aqc111: check packet for fixup for true limit
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 6.1 24/25] net: usb: qmi_wwan: claim interface 4 for ZTE MF290
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 6.1 02/25] usb: aqc111: check packet for fixup for true limit
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 6.6 36/40] net: usb: qmi_wwan: claim interface 4 for ZTE MF290
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 6.6 02/40] usb: aqc111: check packet for fixup for true limit
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Re: [RFC PATCH v2 2/2] kselftest: devices: Add sample board file for google,spherion
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Re: [PATCH v2] usbip: Don't submit special requests twice
- From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC PATCH v2 2/2] kselftest: devices: Add sample board file for google,spherion
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH v2] USB: gadget: core: adjust uevent timing on gadget unbind
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] USB: gadget: core: adjust uevent timing on gadget unbind
- From: Roy Luo <royluo@xxxxxxxxxx>
- RE: [RFC PATCH v2 2/2] kselftest: devices: Add sample board file for google,spherion
- From: "Bird, Tim" <Tim.Bird@xxxxxxxx>
- Re: [RFC PATCH v2 2/2] kselftest: devices: Add sample board file for google,spherion
- From: Christopher Obbard <chris.obbard@xxxxxxxxxxxxx>
- RE: [RFC PATCH v2 2/2] kselftest: devices: Add sample board file for google,spherion
- From: "Bird, Tim" <Tim.Bird@xxxxxxxx>
- Re: Bug in add_dma_entry()'s debugging code
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: Bug in add_dma_entry()'s debugging code
- From: Robin Murphy <robin.murphy@xxxxxxx>
- Re: Bug in add_dma_entry()'s debugging code
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: Bug in add_dma_entry()'s debugging code
- From: Robin Murphy <robin.murphy@xxxxxxx>
- Re: [RFT PATCH 1/2] xhci: Reconfigure endpoint 0 max packet size only during endpoint reset
- From: Kuen-Han Tsai <khtsai@xxxxxxxxxx>
- Re: Bug in add_dma_entry()'s debugging code
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 2/2] usb: typec: tcpci: add vconn over current fault handling to maxim_core
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v1 1/2] usb: typec: tcpm: add tcpm_port_error_recovery symbol
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH] xhci: fix null pointer deref for xhci_urb_enqueue
- From: Kuen-Han Tsai <khtsai@xxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Phil Elwell <phil@xxxxxxxxxxxxxxx>
- Re: [RFC PATCH v2 2/2] kselftest: devices: Add sample board file for google,spherion
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Re: [PATCH] USB: dwc2: write HCINT with INTMASK applied
- From: Ivan Ivanov <ivan.ivanov@xxxxxxxx>
- Re: [RFC PATCH v2 2/2] kselftest: devices: Add sample board file for google,spherion
- From: Mark Brown <broonie@xxxxxxxxxx>
- [RFT PATCH 2/2] xhci: fix possible null pointer deref during xhci urb enqueue
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [RFT PATCH 1/2] xhci: Reconfigure endpoint 0 max packet size only during endpoint reset
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH] xhci: fix null pointer deref for xhci_urb_enqueue
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [westeri-thunderbolt:fixes] BUILD SUCCESS ac43c9122e4287bbdbe91e980fc2528acb72cc1e
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: Bug in add_dma_entry()'s debugging code
- From: Christoph Hellwig <hch@xxxxxx>
- [PATCH 2/3] xhci: replace real & fake port with pointer to root hub port
- From: Niklas Neronin <niklas.neronin@xxxxxxxxxxxxxxx>
- [PATCH 3/3] xhci: save slot ID in struct 'xhci_port'
- From: Niklas Neronin <niklas.neronin@xxxxxxxxxxxxxxx>
- [PATCH 1/3] xhci: rework how real & fake ports are found
- From: Niklas Neronin <niklas.neronin@xxxxxxxxxxxxxxx>
- [PATCH 0/3] xhci rework real & fake ports
- From: Niklas Neronin <niklas.neronin@xxxxxxxxxxxxxxx>
- Re: [PATCH] USB: dwc2: write HCINT with INTMASK applied
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Johan Hovold <johan@xxxxxxxxxx>
- [usb:usb-next] BUILD SUCCESS 3396b3372e61f8b579395e32c53212612b14daff
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] USB: dwc2: write HCINT with INTMASK applied
- From: Andrea della Porta <aporta@xxxxxxx>
- Re: [PATCH v2] usb: typec: class: fix typec_altmode_put_partner to put plugs
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] USB: gadget: core: adjust uevent timing on gadget unbind
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 2/2] usb: typec: tcpci: add vconn over current fault handling to maxim_core
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/2] usb: typec: tcpm: add tcpm_port_error_recovery symbol
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Stefan Wahren <wahrenst@xxxxxxx>
- RE: [RFC PATCH v2 2/2] kselftest: devices: Add sample board file for google,spherion
- From: "Bird, Tim" <Tim.Bird@xxxxxxxx>
- [PATCH v2] usbip: Don't submit special requests twice
- From: Simon Holesch <simon@xxxxxxxxxx>
- [RFC PATCH v2 2/2] kselftest: devices: Add sample board file for google,spherion
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- [RFC PATCH v2 1/2] kselftest: Add test to verify probe of devices from discoverable busses
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- [RFC PATCH v2 0/2] Add test to verify probe of devices from discoverable busses
- From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
- Re: [PATCH] usbip: Don't submit special requests twice
- From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: usbip: vudc: Convert to platform remove callback returning void
- From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2] USB: gadget: core: adjust uevent timing on gadget unbind
- From: Roy Luo <royluo@xxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- [PATCH v2] usb: typec: class: fix typec_altmode_put_partner to put plugs
- From: RD Babiera <rdbabiera@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: connector: usb: add accessory mode description
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v1] USB: gadget: core: adjust uevent timing on gadget unbind
- From: Roy Luo <royluo@xxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: connector: usb: add altmodes description
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Cyril Brulebois <kibi@xxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Justin Chen <justin.chen@xxxxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: Bug in add_dma_entry()'s debugging code
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Phil Elwell <phil@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/4] eventfd: simplify eventfd_signal()
- From: Eric Farman <farman@xxxxxxxxxxxxx>
- Re: Bug in add_dma_entry()'s debugging code
- From: Christoph Hellwig <hch@xxxxxx>
- Re: [PATCH 1/1] usb: cdns3: skip set TRB_IOC when usb_request: no_interrupt is true
- From: Frank Li <Frank.li@xxxxxxx>
- Bug in add_dma_entry()'s debugging code
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Cyril Brulebois <kibi@xxxxxxxxxx>
- Re: [PATCH 1/1] usb: cdns3: skip set TRB_IOC when usb_request: no_interrupt is true
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] usb: cdns3: skip set TRB_IOC when usb_request: no_interrupt is true
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [PATCH v6 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
- From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
- Re: [PATCH 3/6] usb: cdns3-ti: add suspend/resume procedures for J7200
- From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
- Re: (subset) [PATCH v4 0/5] Add USB Support on Qualcomm's SDX75 Platform
- From: Vinod Koul <vkoul@xxxxxxxxxx>
- Re: [PATCH] phy: sunplus: return negative error code in sp_usb_phy_probe
- From: Vinod Koul <vkoul@xxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Cyril Brulebois <kibi@xxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Phil Elwell <phil@xxxxxxxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Cyril Brulebois <kibi@xxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Stefan Wahren <wahrenst@xxxxxxx>
- [RESEND PATCH v2 3/3] usb: misc: onboard_usb_hub: Add support for Cypress CY7C6563x
- From: Frieder Schrempf <frieder@xxxxxxx>
- [RESEND PATCH v2 2/3] usb: misc: onboard_usb_hub: Add support for clock input
- From: Frieder Schrempf <frieder@xxxxxxx>
- [RESEND PATCH v2 1/3] usb: misc: onboard_usb_hub: Print symbolic error names
- From: Frieder Schrempf <frieder@xxxxxxx>
- Re: [PATCH 1/3] usb: misc: onboard_usb_hub: Print symbolic error names
- From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Phil Elwell <phil@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: misc: onboard_usb_hub: Add support for clock input
- From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
- [PATCH 3/3] usb: misc: onboard_usb_hub: Add support for Cypress CY7C6563x
- From: Frieder Schrempf <frieder@xxxxxxx>
- [PATCH 1/3] usb: misc: onboard_usb_hub: Print symbolic error names
- From: Frieder Schrempf <frieder@xxxxxxx>
- [PATCH 2/3] usb: misc: onboard_usb_hub: Add support for clock input
- From: Frieder Schrempf <frieder@xxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [PATCH] thunderbolt:debugfs:Fix memory leak with using debugfs_lookup()
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [PATCH] USB: dwc2: write HCINT with INTMASK applied
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: [PATCH 00/17] tty: small cleanups and fixes
- From: Jiri Slaby <jirislaby@xxxxxxxxxx>
- Re: [PATCH] USB: dwc2: write HCINT with INTMASK applied
- From: Andrea della Porta <aporta@xxxxxxx>
- Re: [PATCH] usb: dwc3: core: Add support for XHCI_SG_TRB_CACHE_SIZE_QUIRK
- From: Prashanth K <quic_prashk@xxxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Justin Chen <justin.chen@xxxxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Cyril Brulebois <kibi@xxxxxxxxxx>
- [PATCH] usbip: Don't submit special requests twice
- From: Simon Holesch <simon@xxxxxxxxxx>
- Re: [PATCH 3/6] usb: cdns3-ti: add suspend/resume procedures for J7200
- From: Kevin Hilman <khilman@xxxxxxxxxx>
- Re: device driver association
- From: Lars Melin <larsm17@xxxxxxxxx>
- Re: device driver association
- From: Ian Zurutuza <ian.zurutuza@xxxxxxxxx>
- Re: [PATCH] usb: gadget: f_fs: Add the missing get_alt callback
- From: John Keeping <john@xxxxxxxxxxxxx>
- [Bug 218190] New: Driver fails to flash ROM to Renesas uPD720201/uPD720202 when using not officially supported SPI Flash
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH 1/3] dt-bindings: usb: xhci: Add optional power-domains
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH] usb: storage: transport: Fix switch-case indentation typo in 'transport.c'
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: Correct misspelling comment word dynamic
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: device driver association
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- device driver association
- From: Ian Zurutuza <ian.zurutuza@xxxxxxxxx>
- [PATCH 2/3] ARM: dts: bcm2711: Add generic xHCI
- From: Stefan Wahren <wahrenst@xxxxxxx>
- [PATCH 3/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Stefan Wahren <wahrenst@xxxxxxx>
- [PATCH 1/3] dt-bindings: usb: xhci: Add optional power-domains
- From: Stefan Wahren <wahrenst@xxxxxxx>
- [PATCH 0/3] ARM: dts: bcm2711-rpi-cm4-io: Enable xHCI host
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [GIT PULL] USB/PHY/Thunderbolt driver fixes for 6.7-rc3
- From: pr-tracker-bot@xxxxxxxxxx
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- [GIT PULL] USB/PHY/Thunderbolt driver fixes for 6.7-rc3
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [usb:usb-linus] BUILD SUCCESS cb9a830e871779b4f9b8d5f76a2abf24915cd007
- From: kernel test robot <lkp@xxxxxxxxx>
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- [PATCH] usb: gadget: f_fs: Add the missing get_alt callback
- From: Hardik Gajjar <hgajjar@xxxxxxxxxxxxxx>
- Re: [GIT PULL] USB-serial fixes for 6.7-rc3
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- Re: Fwd: dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [usb:usb-testing] BUILD SUCCESS 6acba0345b68772830582ca1ca369a2f45631275
- From: kernel test robot <lkp@xxxxxxxxx>
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH] usb: hubs: Decrease IN-endpoint poll interval for Microchip USB491x hub
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: hubs: Decrease IN-endpoint poll interval for Microchip USB491x hub
- From: Hardik Gajjar <hgajjar@xxxxxxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [REGRESSION] USB ports do not work after suspend/resume cycle with v6.6.2
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [REGRESSION] USB ports do not work after suspend/resume cycle with v6.6.2
- From: Vlastimil Babka <vbabka@xxxxxxx>
- Re: Unplugging USB-C charger cable causes `ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)`
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v6 0/6] drm: simplify support for transparent DRM bridges
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v6 0/6] drm: simplify support for transparent DRM bridges
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH 15/22] arch: vdso: consolidate gettime prototypes
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCHv2] USB: gl620a: check for rx buffer overflow
- From: Simon Horman <horms@xxxxxxxxxx>
- Re: [REGRESSION] USB ports do not work after suspend/resume cycle with v6.6.2
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v13 05/10] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
- From: Johan Hovold <johan@xxxxxxxxxx>
- [usb:usb-linus] BUILD SUCCESS 9cf87666fc6e08572341fe08ecd909935998fbbd
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH v13 05/10] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
- From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
- [GIT PULL] USB-serial fixes for 6.7-rc3
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v13 05/10] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v2 2/2] usb: typec: tcpm: Parse Accessory Mode information
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v13 05/10] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v13 05/10] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
- From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
- Re: [PATCH v2 0/4] eventfd: simplify signal helpers
- From: Christian Brauner <brauner@xxxxxxxxxx>
- Re: [PATCH v2 2/4] eventfd: simplify eventfd_signal()
- From: Andrew Donnellan <ajd@xxxxxxxxxxxxx>
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- [PATCH] USB: typec: tps6598x: use device 'type' field to identify devices
- From: Alexandru Ardelean <alex@xxxxxxxxxxx>
- Re: [PATCH 00/17] tty: small cleanups and fixes
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/4] eventfd: simplify signal helpers
- From: Jens Axboe <axboe@xxxxxxxxx>
- [REGRESSION] USB ports do not work after suspend/resume cycle with v6.6.2
- From: Oleksandr Natalenko <oleksandr@xxxxxxxxxxxxxx>
- Re: [PATCH] usb: hubs: Decrease IN-endpoint poll interval for Microchip USB491x hub
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2] USB: serial: option: add Luat Air72*U series products
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 1/2] usb: misc: onboard_usb_hub: Add support for clock input
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: misc: onboard_usb_hub: Add support for clock input
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] USB: serial: option: add Luat Air72*U series products
- From: Asuna Yang <spriteovo@xxxxxxxxx>
- [PATCH v3 2/2] dt-bindings: usb: tps6598x: add reset-gpios property
- From: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
- [PATCH v3 0/2] usb: typec: tps6598x: add reset gpio support
- From: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
- [PATCH v3 1/2] usb: typec: tps6598x: add reset gpio support
- From: Javier Carrasco <javier.carrasco@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] r8152: Add RTL8152_INACCESSIBLE checks to more loops
- From: Simon Horman <horms@xxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 2/2] usb: misc: onboard_usb_hub: Add support for Cypress CY7C6563x
- From: Frieder Schrempf <frieder@xxxxxxx>
- [PATCH 1/2] usb: misc: onboard_usb_hub: Add support for clock input
- From: Frieder Schrempf <frieder@xxxxxxx>
- Re: [PATCH v13 05/10] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v2 2/4] eventfd: simplify eventfd_signal()
- From: Christian Brauner <brauner@xxxxxxxxxx>
- Re: [PATCH v2 1/4] i915: make inject_virtual_interrupt() void
- From: Christian Brauner <brauner@xxxxxxxxxx>
- Re: Unplugging USB-C charger cable causes `ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)`
- From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
- Re: [PATCH v2] USB: serial: option: add Luat Air72*U series products
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH v3 6/6] Makefile.extrawarn: turn on missing-prototypes globally
- From: Arnd Bergmann <arnd@xxxxxxxxxx>
- [PATCH v3 5/6] usb: fsl-mph-dr-of: mark fsl_usb2_mpc5121_init() static
- From: Arnd Bergmann <arnd@xxxxxxxxxx>
- [PATCH v3 4/6] x86: sta2x11: include header for sta2x11_get_instance() prototype
- From: Arnd Bergmann <arnd@xxxxxxxxxx>
- [PATCH v3 3/6] sched: fair: move unused stub functions to header
- From: Arnd Bergmann <arnd@xxxxxxxxxx>
- [PATCH v3 2/6] jffs2: mark __jffs2_dbg_superblock_counts() static
- From: Arnd Bergmann <arnd@xxxxxxxxxx>
- [PATCH v3 1/6] ida: make 'ida_dump' static
- From: Arnd Bergmann <arnd@xxxxxxxxxx>
- [PATCH v3 0/6] Treewide: enable -Wmissing-prototypes
- From: Arnd Bergmann <arnd@xxxxxxxxxx>
- Re: [PATCH v1] usb: typec: class: fix typec_altmode_put_partner to put plugs
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH 3/6] usb: cdns3-ti: add suspend/resume procedures for J7200
- From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
- Re: [PATCH 0/2] usb: fix port mapping for ZTE MF290 modem
- From: patchwork-bot+netdevbpf@xxxxxxxxxx
- Re: [PATCH v1] USB: gadget: core: adjust uevent timing on gadget unbind
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] usb: hubs: Decrease IN-endpoint poll interval for Microchip USB491x hub
- From: Hardik Gajjar <hgajjar@xxxxxxxxxxxxxx>
- Re: [PATCH 0/2] usb: fix port mapping for ZTE MF290 modem
- From: Paolo Abeni <pabeni@xxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [Patch v2] thunderbolt: Add quirk to reset downstream port
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- [PATCH] usb: storage: transport: Fix switch-case indentation typo in 'transport.c'
- From: Ren Xiao <u202112004@xxxxxxxxxxx>
- [PATCH] usb: storage: transport: Fix indentation typo in 'transport.c'
- From: Ren Xiao <u202112004@xxxxxxxxxxx>
- Re: [Patch v2] thunderbolt: Add quirk to reset downstream port
- From: Mario Limonciello <mario.limonciello@xxxxxxx>
- Re: [Patch v2] thunderbolt: Add quirk to reset downstream port
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [Patch v2] thunderbolt: Add quirk to reset downstream port
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [Patch v2] thunderbolt: Add quirk to reset downstream port
- From: Sanath S <sanaths2@xxxxxxx>
- [PATCH] usb: Correct misspelling comment word dynamic
- From: shitao <shitao@xxxxxxxxxx>
- [PATCH] usb: Correct misspelling comment word dynamic
- From: shitao <shitao@xxxxxxxxxx>
- Re: [PATCH] xhci: fix null pointer deref for xhci_urb_enqueue
- From: kernel test robot <oliver.sang@xxxxxxxxx>
- Re: [PATCH v2 1/4] i915: make inject_virtual_interrupt() void
- From: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/7] usb: cdns: fix suspend on J7200 by assuming reset-on-resume
- From: Kevin Hilman <khilman@xxxxxxxxxx>
- Re: [PATCH v2 2/7] usb: cdns3-ti: remove runtime PM
- From: Kevin Hilman <khilman@xxxxxxxxxx>
- Re: [PATCH v1] USB: gadget: core: adjust uevent timing on gadget unbind
- From: Roy Luo <royluo@xxxxxxxxxx>
- Re: [PATCH 3/6] usb: cdns3-ti: add suspend/resume procedures for J7200
- From: Kevin Hilman <khilman@xxxxxxxxxx>
- Re: [PATCH v1] USB: gadget: core: adjust uevent timing on gadget unbind
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH v1] USB: gadget: core: adjust uevent timing on gadget unbind
- From: Roy Luo <royluo@xxxxxxxxxx>
- Re: possible proble with skb_pull() in smsc75xx_rx_fixup()
- From: Szymon Heidrich <szymon.heidrich@xxxxxxxxx>
- Re: [PATCH v3] usb: misc: ljca: Fix enumeration error on Dell Latitude 9420
- From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
- Re: [PATCH v13 05/10] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
- From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
- [PATCH 2/6] usb: dwc3: qcom: Rename hs_phy_irq to qusb2_phy_irq
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH 1/6] dt-bindings: usb: dwc3: Clean up hs_phy_irq in bindings
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH 0/6] Refine USB interrupt vectors on Qualcomm platforms
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- Re: Unplugging USB-C charger cable causes `ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)`
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: gadget: aspeed: Check return value of kasprintf in ast_vhub_alloc_epn
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v6 0/6] drm: simplify support for transparent DRM bridges
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v4 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [v6,1/6] drm/bridge: add transparent bridge helper
- From: Sui Jingfeng <sui.jingfeng@xxxxxxxxx>
- Re: [PATCH v2 1/7] dt-bindings: usb: ti,j721e-usb: add ti,j7200-usb compatible
- From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
- [PATCH] usb: dwc3: Fix spurious wakeup when port is on device mode
- From: "Guilherme G. Piccoli" <gpiccoli@xxxxxxxxxx>
- Re: [PATCH v6 0/6] drm: simplify support for transparent DRM bridges
- From: Sui Jingfeng <sui.jingfeng@xxxxxxxxx>
- Re: [Patch v2] thunderbolt: Add quirk to reset downstream port
- From: Mario Limonciello <mario.limonciello@xxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: connector: Add child nodes for multiple PD capabilities
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 2/4] eventfd: simplify eventfd_signal()
- From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 4/4] eventfd: make eventfd_signal{_mask}() void
- From: Jan Kara <jack@xxxxxxx>
- Re: [PATCH v2 3/4] eventfd: simplify eventfd_signal_mask()
- From: Jan Kara <jack@xxxxxxx>
- Re: [PATCH v2 2/4] eventfd: simplify eventfd_signal()
- From: Jan Kara <jack@xxxxxxx>
- Re: [PATCH v2 1/4] i915: make inject_virtual_interrupt() void
- From: Jan Kara <jack@xxxxxxx>
- Re: [PATCH v2 2/4] eventfd: simplify eventfd_signal()
- From: Xu Yilun <yilun.xu@xxxxxxxxxxxxxxx>
- Re: [PATCH v2] USB: serial: option: add Luat Air72*U series products
- From: Asuna Yang <spriteovo@xxxxxxxxx>
- [PATCH v2] USB: serial: option: add Luat Air72*U series products
- From: Asuna Yang <spriteovo@xxxxxxxxx>
- [PATCH v2 4/4] eventfd: make eventfd_signal{_mask}() void
- From: Christian Brauner <brauner@xxxxxxxxxx>
- [PATCH v2 3/4] eventfd: simplify eventfd_signal_mask()
- From: Christian Brauner <brauner@xxxxxxxxxx>
- [PATCH v2 2/4] eventfd: simplify eventfd_signal()
- From: Christian Brauner <brauner@xxxxxxxxxx>
- [PATCH v2 1/4] i915: make inject_virtual_interrupt() void
- From: Christian Brauner <brauner@xxxxxxxxxx>
- [PATCH v2 0/4] eventfd: simplify signal helpers
- From: Christian Brauner <brauner@xxxxxxxxxx>
- Re: [PATCH 10/12] dt-bindings: usb: qcom,dwc3: Introduce flattened qcom,dwc3 binding
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] USB: dwc2: write HCINT with INTMASK applied
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: [PATCH 09/12] dt-bindings: usb: qcom,dwc3: Rename to "glue"
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 07/12] usb: dwc3: qcom: Instantiate dwc3 core directly
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 06/12] usb: dwc3: qcom: Add dwc3 core reference in driver state
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v3] usb: misc: ljca: Fix enumeration error on Dell Latitude 9420
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: gadget: aspeed: Check return value of kasprintf in ast_vhub_alloc_epn
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/7] dt-bindings: usb: ti,j721e-usb: add ti,j7200-usb compatible
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 04/12] usb: dwc3: Expose core driver as library
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [syzbot] KASAN: use-after-free Read in __media_entity_remove_links
- From: Aleksandr Nogikh <nogikh@xxxxxxxxxx>
- Re: [PATCH v2 1/7] dt-bindings: usb: ti,j721e-usb: add ti,j7200-usb compatible
- From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
- Re: [PATCH 03/12] usb: dwc3: qcom: Merge resources from urs_usb device
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCHv2] USB: gl620a: check for rx buffer overflow
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCHv2] USB: gl620a: check for rx buffer overflow
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
- Re: [PATCHv2] USB: gl620a: check for rx buffer overflow
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH 02/12] usb: dwc3: qcom: Rename dwc3 platform_device reference
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCHv2] USB: gl620a: check for rx buffer overflow
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCHv2] USB: gl620a: check for rx buffer overflow
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH 00/12] usb: dwc3: qcom: Flatten dwc3 structure
- From: Johan Hovold <johan@xxxxxxxxxx>
- [RFC] usb: dwc: ep0: Use -ESHUTDOWN in dwc3_ep0_stall_restart
- From: Uttkarsh Aggarwal <quic_uaggarwa@xxxxxxxxxxx>
- Re: [PATCH v2] USB: serial: option: add Fibocom L7xx modules
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH] thunderbolt:debugfs:Fix memory leak with using debugfs_lookup()
- From: Yaxiong Tian <iambestgod@xxxxxxxxxxx>
- Re: [Patch v2] thunderbolt: Add quirk to reset downstream port
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [Patch v2] thunderbolt: Add quirk to reset downstream port
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- [Patch v2] thunderbolt: Add quirk to reset downstream port
- From: Sanath S <Sanath.S@xxxxxxx>
- Re: [PATCH v2] USB: serial: option: add Fibocom L7xx modules
- From: Lars Melin <larsm17@xxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH] USB: serial: option: modify Fibocom to DELL custom modem FM101R-GL
- From: "Puliang Lu(Puliang)" <puliang.lu@xxxxxxxxxxx>
- Re: [PATCH] USB: gl620a: check for rx buffer overflow
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- [PATCH] usb: gadget: aspeed: Check return value of kasprintf in ast_vhub_alloc_epn
- From: Kunwu Chan <chentao@xxxxxxxxxx>
- Re: [Patch] thunderbolt: Add quirk to reset downstream port
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH] usb: dwc3: gadget: Handle EP0 request dequeuing properly
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] net: usb: ax88179_178a: fix failed operations during ax88179_reset
- From: patchwork-bot+netdevbpf@xxxxxxxxxx
- Re: [PATCH v2 1/2] net: usb: ax88179_178a: fix failed operations during ax88179_reset
- From: patchwork-bot+netdevbpf@xxxxxxxxxx
- Re: [PATCH 10/17] tty: hso: don't initialize global serial_table
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- Re: [PATCH 09/17] tty: hso: don't emit load/unload info to the log
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- Re: [syzbot] KASAN: use-after-free Read in __media_entity_remove_links
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: usb: qcom,dwc3: adjust number of interrupts on SM6125
- From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
- Re: [syzbot] KASAN: use-after-free Read in __media_entity_remove_links
- From: syzbot <syzbot+0b0095300dfeb8a83dc8@xxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH v2] USB: serial: option: add Fibocom L7xx modules
- From: Victor Fragoso <victorffs@xxxxxxxxxxx>
- Re: Slow enumeration of Creative Sound Blaster G3
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- [PATCH v1] usb: typec: class: fix typec_altmode_put_partner to put plugs
- From: RD Babiera <rdbabiera@xxxxxxxxxx>
- [PATCH v1 2/2] usb: typec: tcpci: add vconn over current fault handling to maxim_core
- From: RD Babiera <rdbabiera@xxxxxxxxxx>
- [PATCH v1 1/2] usb: typec: tcpm: add tcpm_port_error_recovery symbol
- From: RD Babiera <rdbabiera@xxxxxxxxxx>
- [PATCH v1 0/2] usb: typec: handle tcpc vconn oc fault by triggering tcpm error recovery
- From: RD Babiera <rdbabiera@xxxxxxxxxx>
- [PATCH v3] usb: misc: ljca: Fix enumeration error on Dell Latitude 9420
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v2 2/2] usb: typec: tcpm: Parse Accessory Mode information
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: connector: usb: add accessory mode description
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 0/2] usb: typec: tcpm: Handle Accessory Modes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: Qualcomm Atheros QCA61x4 keeps drawing 0.85 W despite Bluetooth being disable in GNOME
- From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [Patch] thunderbolt: Add quirk to reset downstream port
- From: Sanath S <sanaths2@xxxxxxx>
- Re: [PATCH v2] usb: misc: ljca: Fix enumeration error on Dell Latitude 9420
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v2] usb: dwc3: xilinx: improve error handling for PM APIs
- From: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxx>
- Re: [Patch] thunderbolt: Add quirk to reset downstream port
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/3] USB: dwc3: qcom: fix resource leaks on probe deferral
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: Slow enumeration of Creative Sound Blaster G3
- From: Andreas Kempf <aakempf@xxxxxxxxx>
- Re: [PATCH 2/2] r8152: Add RTL8152_INACCESSIBLE checks to more loops
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [Patch] thunderbolt: Add quirk to reset downstream port
- From: Sanath S <Sanath.S@xxxxxxx>
- Re: [PATCH 1/2] r8152: Hold the rtnl_lock for all of reset
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: Qualcomm Atheros QCA61x4 keeps drawing 0.85 W despite Bluetooth being disable in GNOME
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Qualcomm Atheros QCA61x4 keeps drawing 0.85 W despite Bluetooth being disable in GNOME
- From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/7] dt-bindings: usb: ti,j721e-usb: add ti,j7200-usb compatible
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 6/7] usb: cdns3-ti: signal reset-on-resume to xHCI for J7200 platform
- From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 1/7] dt-bindings: usb: ti,j721e-usb: add ti,j7200-usb compatible
- From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
- Re: [PATCH v2 6/7] usb: cdns3-ti: signal reset-on-resume to xHCI for J7200 platform
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v2 4/7] usb: cdns3-ti: add suspend/resume procedures for J7200
- From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
- Re: Qualcomm Atheros QCA61x4 keeps drawing 0.85 W despite Bluetooth being disable in GNOME
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Fwd: dwc3: regression in USB DWC3 driver in kernel 5.15 branch
- From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
- Re: [PATCH 0/3] USB: dwc3: qcom: fix resource leaks on probe deferral
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] usb: gadget: uvc: Add framebased frame format support
- From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
- Re: [PATCH 0/3] USB: dwc3: qcom: fix resource leaks on probe deferral
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 20/22] usb: fsl-mph-dr-of: mark fsl_usb2_mpc5121_init() static
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb: misc: ljca: Fix enumeration error on Dell Latitude 9420
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: gadget: uvc: Add framebased frame format support
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: serial: option: add Luat Air72*U series products
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: typec: tcpm: skip checking port->send_discover in PD3.0
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [RFC] USB: ipeth: race between ipeth_close and error handling
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH 2/3] USB: dwc3: qcom: fix wakeup after probe deferral
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: Unplugging USB-C charger cable causes `ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)`
- From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] USB: dwc3: qcom: fix software node leak on probe errors
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: typec: tcpm: skip checking port->send_discover in PD3.0
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: Unplugging USB-C charger cable causes `ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)`
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] USB: dwc3: qcom: fix wakeup after probe deferral
- From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
- Re: [PATCH 0/3] USB: dwc3: qcom: fix wakeup after probe deferral
- From: Andrew Halaney <ahalaney@xxxxxxxxxx>
- [PATCH] usb: dwc3: core: Add support for XHCI_SG_TRB_CACHE_SIZE_QUIRK
- From: Prashanth K <quic_prashk@xxxxxxxxxxx>
- Re: Test USB Type-C port?
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] USB: dwc3: qcom: fix wakeup after probe deferral
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH] USB: gl620a: check for rx buffer overflow
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH] USB: serial: option: modify Fibocom to DELL custom modem FM101R-GL
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 0/2] usb: fix port mapping for ZTE MF290 modem
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 2/3] USB: dwc3: qcom: fix wakeup after probe deferral
- From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
- Re: [PATCH] USB: serial: option: add Luat Air72*U series products
- From: SpriteOvO <spriteovo@xxxxxxxxx>
- Unplugging USB-C charger cable causes `ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)`
- From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
- [PATCH] usb: typec: tipd: Supply also I2C driver data
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH] USB: serial: option: add Luat Air72*U series products
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] USB: serial: option: add Luat Air72*U series products
- From: Sprite <spriteovo@xxxxxxxxx>
- Re: [PATCH v6 6/6] usb: typec: qcom-pmic-typec: switch to DRM_AUX_HPD_BRIDGE
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 0/2] usb: fix port mapping for ZTE MF290 modem
- From: Paolo Abeni <pabeni@xxxxxxxxxx>
- Re: [PATCH 0/2] usb: fix port mapping for ZTE MF290 modem
- From: Paolo Abeni <pabeni@xxxxxxxxxx>
- Re: [PATCH v6 6/6] usb: typec: qcom-pmic-typec: switch to DRM_AUX_HPD_BRIDGE
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v2 5/7] usb: cdns3: add quirk to platform data for reset-on-resume
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- Re: [PATCH 2/2] r8152: Add RTL8152_INACCESSIBLE checks to more loops
- From: Paolo Abeni <pabeni@xxxxxxxxxx>
- Re: [PATCH 1/2] r8152: Hold the rtnl_lock for all of reset
- From: Paolo Abeni <pabeni@xxxxxxxxxx>
- Re: [PATCH] usb: dwc3: don't reset device side if dwc3 was configured as host-only
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [PATCH 2/2] usb: typec: tcpm: Parse Accessory Mode information
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
- [PATCH 10/17] tty: hso: don't initialize global serial_table
- From: "Jiri Slaby (SUSE)" <jirislaby@xxxxxxxxxx>
- [PATCH 09/17] tty: hso: don't emit load/unload info to the log
- From: "Jiri Slaby (SUSE)" <jirislaby@xxxxxxxxxx>
- [PATCH 00/17] tty: small cleanups and fixes
- From: "Jiri Slaby (SUSE)" <jirislaby@xxxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: connector: usb: add altmodes description
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/3] USB: dwc3: qcom: fix wakeup after probe deferral
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v6 1/6] drm/bridge: add transparent bridge helper
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v6 4/6] drm/bridge: implement generic DP HPD bridge
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v6 6/6] usb: typec: qcom-pmic-typec: switch to DRM_AUX_HPD_BRIDGE
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: connector: usb: add altmodes description
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [GIT PULL] USB4/Thunderbolt fixes for v6.7-rc3
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v3 1/4] phy: core: add notify_connect and notify_disconnect callback
- From: Stanley Chang[昌育德] <stanley_chang@xxxxxxxxxxx>
- [GIT PULL] USB4/Thunderbolt fixes for v6.7-rc3
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/4] phy: core: add notify_connect and notify_disconnect callback
- From: Kishon Vijay Abraham I <kvijayab@xxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH 2/2] r8152: Add RTL8152_INACCESSIBLE checks to more loops
- From: Grant Grundler <grundler@xxxxxxxxxxxx>
- Re: [PATCH 1/2] r8152: Hold the rtnl_lock for all of reset
- From: Grant Grundler <grundler@xxxxxxxxxxxx>
- Test USB Type-C port?
- From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
- [PATCH 2/2] usb: typec: tcpm: Parse Accessory Mode information
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 1/2] dt-bindings: connector: usb: add accessory mode description
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 0/2] usb: typec: tcpm: Handle Accessory Modes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 2/3] usb: typec: change altmode SVID to u16 entry
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 3/3] arm64: dts: qcom: qrb5165-rb5: use u16 for DP altmode svid
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 1/3] dt-bindings: connector: usb: add altmodes description
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 0/3] dt-bindings: connector: usb: provide bindings for altmodes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: Qualcomm Atheros QCA61x4 keeps drawing 0.85 W despite Bluetooth being disable in GNOME
- From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
- [PATCH 3/5] usb: gadget: gr_udc: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 0/5] usb: gadget: udc: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 5/5] usb: gadget: pxa25x_udc: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 4/5] usb: gadget: lpc32xx_udc: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 1/5] usb: gadget: at91_udc: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 2/5] usb: gadget: fsl_udc: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] USB: dwc3: qcom: fix wakeup after probe deferral
- From: Andrew Halaney <ahalaney@xxxxxxxxxx>
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- Re: [PATCH 1/3] dt-bindings: usb: qcom,dwc3: fix example wakeup interrupt types
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: Qualcomm Atheros QCA61x4 keeps drawing 0.85 W despite Bluetooth being disable in GNOME
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] USB: dwc3: qcom: fix wakeup after probe deferral
- From: Andrew Halaney <ahalaney@xxxxxxxxxx>
- Re: [PATCH v2 0/7] usb: cdns: fix suspend on J7200 by assuming reset-on-resume
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 7/7] arm64: dts: ti: k3-j7200: use J7200-specific USB compatible
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 1/7] dt-bindings: usb: ti,j721e-usb: add ti,j7200-usb compatible
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 4/7] usb: cdns3-ti: add suspend/resume procedures for J7200
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v2 5/7] usb: cdns3: add quirk to platform data for reset-on-resume
- From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
- [PATCH v2 7/7] arm64: dts: ti: k3-j7200: use J7200-specific USB compatible
- From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
- [PATCH v2 6/7] usb: cdns3-ti: signal reset-on-resume to xHCI for J7200 platform
- From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
- [PATCH v2 4/7] usb: cdns3-ti: add suspend/resume procedures for J7200
- From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
- [PATCH v2 3/7] usb: cdns3-ti: move reg writes from probe into an init_hw helper
- From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
- [PATCH v2 2/7] usb: cdns3-ti: remove runtime PM
- From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
- [PATCH v2 0/7] usb: cdns: fix suspend on J7200 by assuming reset-on-resume
- From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
- [PATCH v2 1/7] dt-bindings: usb: ti,j721e-usb: add ti,j7200-usb compatible
- From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
- Re: [PATCH 0/3] USB: dwc3: qcom: fix resource leaks on probe deferral
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: question on random MAC in usbnet
- From: Dan Williams <dcbw@xxxxxxxxxx>
- [PATCH 0/3] USB: dwc3: qcom: fix wakeup after probe deferral
- From: Johan Hovold <johan+linaro@xxxxxxxxxx>
- [PATCH 1/3] dt-bindings: usb: qcom,dwc3: fix example wakeup interrupt types
- From: Johan Hovold <johan+linaro@xxxxxxxxxx>
- [PATCH 3/3] USB: dwc3: qcom: simplify wakeup interrupt setup
- From: Johan Hovold <johan+linaro@xxxxxxxxxx>
- [PATCH 2/3] USB: dwc3: qcom: fix wakeup after probe deferral
- From: Johan Hovold <johan+linaro@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH] xhci: fix null pointer deref for xhci_urb_enqueue
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH 0/3] USB: dwc3: qcom: fix resource leaks on probe deferral
- From: Andrew Halaney <ahalaney@xxxxxxxxxx>
- Re: possible proble with skb_pull() in smsc75xx_rx_fixup()
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH v6 0/2] usb: serial: add support for CH348
- From: Corentin LABBE <clabbe@xxxxxxxxxxxx>
- [PATCH v2 2/2] net: usb: ax88179_178a: avoid two consecutive device resets
- From: Jose Ignacio Tornos Martinez <jtornosm@xxxxxxxxxx>
- [PATCH v2 1/2] net: usb: ax88179_178a: fix failed operations during ax88179_reset
- From: Jose Ignacio Tornos Martinez <jtornosm@xxxxxxxxxx>
- Re: [PATCH 21/34] usb: cdc-acm: optimize acm_softint()
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: question on random MAC in usbnet
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH 3/3] USB: dwc3: qcom: fix ACPI platform device leak
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- [PATCH] phy: sunplus: return negative error code in sp_usb_phy_probe
- From: Su Hui <suhui@xxxxxxxxxxxx>
- Re: Qualcomm Atheros QCA61x4 keeps drawing 0.85 W despite Bluetooth being disable in GNOME
- From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
- Re: [PATCH v6] usb:gadget:uvc Do not use worker thread to pump isoc usb requests
- From: Jayant Chowdhary <jchowdhary@xxxxxxxxxx>
- [PATCH v7] usb:gadget:uvc Do not use worker thread to pump isoc usb requests
- From: Jayant Chowdhary <jchowdhary@xxxxxxxxxx>
- Re: [PATCH 4/6] usb: cdns3: support power-off of controller when in host role
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- [westeri-thunderbolt:fixes] BUILD SUCCESS 480713b1ba8eac4617936f8404da34bda991c30e
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: Qualcomm Atheros QCA61x4 keeps drawing 0.85 W despite Bluetooth being disable in GNOME
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v3 1/4] phy: core: add notify_connect and notify_disconnect callback
- From: Stanley Chang[昌育德] <stanley_chang@xxxxxxxxxxx>
- [syzbot] [staging?] [usb?] memory leak in _r8712_init_xmit_priv (2)
- From: syzbot <syzbot+83763e624cfec6b462cb@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: Qualcomm Atheros QCA61x4 keeps drawing 0.85 W despite Bluetooth being disable in GNOME
- From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- Re: question on random MAC in usbnet
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: Qualcomm Atheros QCA61x4 keeps drawing 0.85 W despite Bluetooth being disable in GNOME
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: Qulcomm Atheros QCA61x4 keeps drawing 0.85 W despite Bluetooth being disable in GNOME
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: Qualcomm Atheros QCA61x4 keeps drawing 0.85 W despite Bluetooth being disable in GNOME
- From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
- Qulcomm Atheros QCA61x4 keeps drawing 0.85 W despite Bluetooth being disable in GNOME
- From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
- RE: question on random MAC in usbnet
- From: David Laight <David.Laight@xxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH 00/34] biops: add atomig find_bit() operations
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- Re: [PATCH 01/34] lib/find: add atomic find_bit() primitives
- From: Bart Van Assche <bvanassche@xxxxxxx>
- Re: [PATCH 00/34] biops: add atomig find_bit() operations
- From: Bart Van Assche <bvanassche@xxxxxxx>
- [PATCH 21/34] usb: cdc-acm: optimize acm_softint()
- From: Yury Norov <yury.norov@xxxxxxxxx>
- [PATCH 01/34] lib/find: add atomic find_bit() primitives
- From: Yury Norov <yury.norov@xxxxxxxxx>
- [PATCH 00/34] biops: add atomig find_bit() operations
- From: Yury Norov <yury.norov@xxxxxxxxx>
- Re: [PATCH] xhci: fix null pointer deref for xhci_urb_enqueue
- From: Kuen-Han Tsai <khtsai@xxxxxxxxxx>
- Re: [PATCH 3/6] usb: cdns3-ti: add suspend/resume procedures for J7200
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH] xhci: fix null pointer deref for xhci_urb_enqueue
- From: Kuen-Han Tsai <khtsai@xxxxxxxxxx>
- [PATCH] usb: xhci-mtk: fix in-ep's start-split check failure
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [PATCH 0/3] USB: dwc3: qcom: fix resource leaks on probe deferral
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- [PATCH 2/2] net: usb: qmi_wwan: claim interface 4 for ZTE MF290
- From: Lech Perczak <lech.perczak@xxxxxxxxx>
- [PATCH 1/2] usb: serial: option: don't claim interface 4 for ZTE MF290
- From: Lech Perczak <lech.perczak@xxxxxxxxx>
- [PATCH 0/2] usb: fix port mapping for ZTE MF290 modem
- From: Lech Perczak <lech.perczak@xxxxxxxxx>
- [Bug 215740] kernel warning: DMA-API: xhci_hcd: cacheline tracking EEXIST, overlapping mappings aren't supported
- From: bugzilla-daemon@xxxxxxxxxx
- [PATCH 2/2] r8152: Add RTL8152_INACCESSIBLE checks to more loops
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [PATCH 1/2] r8152: Hold the rtnl_lock for all of reset
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v2] usb: dwc3: set the dma max_seg_size
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] USB: dwc3: qcom: fix ACPI platform device leak
- From: Andrew Halaney <ahalaney@xxxxxxxxxx>
- Re: [PATCH 2/3] USB: dwc3: qcom: fix software node leak on probe errors
- From: Andrew Halaney <ahalaney@xxxxxxxxxx>
- Re: [PATCH 1/3] USB: dwc3: qcom: fix resource leaks on probe deferral
- From: Andrew Halaney <ahalaney@xxxxxxxxxx>
- [PATCH 0/3] USB: dwc3: qcom: fix resource leaks on probe deferral
- From: Johan Hovold <johan+linaro@xxxxxxxxxx>
- [PATCH 3/3] USB: dwc3: qcom: fix ACPI platform device leak
- From: Johan Hovold <johan+linaro@xxxxxxxxxx>
- [PATCH 1/3] USB: dwc3: qcom: fix resource leaks on probe deferral
- From: Johan Hovold <johan+linaro@xxxxxxxxxx>
- [PATCH 2/3] USB: dwc3: qcom: fix software node leak on probe errors
- From: Johan Hovold <johan+linaro@xxxxxxxxxx>
- Re: r8152 logs error `can't resubmit intr, status -1`
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: config: fix iteration issue in 'usb_get_bos_descriptor()'
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/6] usb: cdns3-ti: add suspend/resume procedures for J7200
- From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
- Re: [PATCH] xhci: fix null pointer deref for xhci_urb_enqueue
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: config: fix iteration issue in 'usb_get_bos_descriptor()'
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH] xhci: fix null pointer deref for xhci_urb_enqueue
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb: dwc3: set the dma max_seg_size
- From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
- Re: [PATCH 3/6] usb: cdns3-ti: add suspend/resume procedures for J7200
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH 1/3] thunderbolt: Set lane bonding bit only for downstream port
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH 3/6] usb: cdns3-ti: add suspend/resume procedures for J7200
- From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
[Index of Archives]
[Linux USB Devel (old)]
[Linux Input]
[Linux SCSI]
[Samba]
[Yosemite News]