RE: [EXT] Re: [PATCH v5 4/8] dt-bindings: usb: ci-hdrc-usb2: add restrictions for reg, interrupts, clock and clock-names properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> 
> On 02/02/2024 10:10, Xu Yang wrote:
> > Hi Krzysztof,
> >
> >>
> >> On 31/01/2024 12:43, Xu Yang wrote:
> >>> Change reg, interrupts, clock and clock-names as common properties and add
> >>> restrictions on them for different compatibles.
> >>>
> >>> Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>
> >>>
> >>> ---
> >>> Changes in v4:
> >>>  - new patch since v3's discussion
> >>>  - split the reg, interrupts, clock and clock-names properties into
> >>>    common part and device-specific
> >>> Changes in v5:
> >>>  - keep common property unchanged
> >>>  - make if-then more readable
> >>>  - remove non imx part
> >>> ---
> >>>  .../devicetree/bindings/usb/ci-hdrc-usb2.yaml | 118 ++++++++++++++++++
> >>>  1 file changed, 118 insertions(+)
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-
> >> hdrc-usb2.yaml
> >>> index 3b56e0edb1c6..6ad3582051b8 100644
> >>> --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
> >>> +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
> >>> @@ -412,6 +412,124 @@ allOf:
> >>>          samsung,picophy-pre-emp-curr-control: false
> >>>          samsung,picophy-dc-vol-level-adjust: false
> >>>
> >>> +  - if:
> >>> +      properties:
> >>> +        compatible:
> >>> +          const: fsl,imx27-usb
> >>> +    then:
> >>> +      properties:
> >>> +        clocks:
> >>> +          minItems: 3
> >>> +          maxItems: 3
> >>> +        clock-names:
> >>> +          minItems: 3
> >>> +          maxItems: 3
> >>> +          items:
> >>> +            anyOf:
> >>> +              - const: ipg
> >>> +              - const: ahb
> >>> +              - const: per
> >>
> >> This would be just: enum: [ipg, ahb, per], but in both cases I question
> >> why the order should be flexible? Nothing in commit msg explains it.
> >
> > The driver will get the clock by clock-name, then the order should not
> > matter. However, these three clock-names should be present at the same
> > time. I should use enum then.
> 
> Forgot to answer to this.
> 
> Which driver? U-boot? OpenBSD? The one in my custom Linux kernel fork
> (open-source and published on github)? Did you check all of them?

I mean below driver in linux kernel tree.
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/tree/drivers/usb/chipidea/ci_hdrc_imx.c?h=linux-6.1.y#n191

Thanks,
Xu Yang




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux