On Tue, Jan 23, 2024 at 06:42:27PM +0000, Conor Dooley wrote: > On Tue, Jan 23, 2024 at 01:02:21PM -0500, Frank Li wrote: > > On Tue, Jan 23, 2024 at 05:51:48PM +0000, Conor Dooley wrote: > > > On Tue, Jan 23, 2024 at 12:49:27PM -0500, Frank Li wrote: > > > > On Tue, Jan 23, 2024 at 05:27:13PM +0000, Conor Dooley wrote: > > > > > On Tue, Jan 23, 2024 at 12:02:05PM -0500, Frank Li wrote: > > > > > > Add device tree binding allow platform overwrite default value of *REQIN in > > > > > > GSBUSCFG0. > > > > > > > > > > Why might a platform actually want to do this? Why does this need to be > > > > > set at the board level and being aware of which SoC is in use is not > > > > > sufficient for the driver to set the correct values? > > > > > > > > In snps,dwc3.yaml, there are already similary proptery, such as > > > > snps,incr-burst-type-adjustment. Use this method can keep whole dwc3 usb > > > > driver keep consistent. And not all platform try enable hardware > > > > dma_cohenrence. It is configable for difference platform. > > > > > > When you say "platform", what do you mean? I understand that term to > > > mean a combination of board, soc and firmware. > > > > In my company's environment, "platform" is "board". I will use "board" in > > future. Is it big difference here? > > Nah, that's close enough that it makes no difference here. > > I'd still like an explanation for why a platform would need to actually > set these properties though, and why information about coherency cannot > be determined from whether or not the boss the usb controller is on is > communicated to be dma coherent via the existing devicetree properties > for that purpose. Actually, I am not very clear about reason. I guest maybe treat off power consumption and performance. What's your judgement about proptery, which should be in dts. Such as reg, clk, reset, dma and irq, which is tighted with SOC. It is the fixed value for every SOC. The board dts never change these. But for this "snps,*-reqinfo", you don't like put into dts? There are similar case at 2019, https://lore.kernel.org/linux-devicetree/CADRPPNRHOda+ZfB25CeqReXBb-MrB1oAeTHF-3muXVExn+G+Dg@xxxxxxxxxxxxxx/ look like, this thread prefer quirk proptery method. Frank > > Thanks, > Conor. > > > > > > > Signed-off-by: Frank Li <Frank.Li@xxxxxxx> > > > > > > --- > > > > > > .../devicetree/bindings/usb/snps,dwc3.yaml | 36 +++++++++++++++++++ > > > > > > 1 file changed, 36 insertions(+) > > > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > > > > > index 8f5d250070c78..43e7fea3f6798 100644 > > > > > > --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > > > > > +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > > > > > @@ -439,6 +439,42 @@ properties: > > > > > > items: > > > > > > enum: [1, 4, 8, 16, 32, 64, 128, 256] > > > > > > > > > > > > + snps,des-wr-reqinfo: > > > > > > + description: Value for DESEWRREQIN of GSBUSCFG0 register. > > > > > > + ---------------------------------------------------------------- > > > > > > + MBUS_TYPE| bit[3] |bit[2] |bit[1] |bit[0] > > > > > > + ---------------------------------------------------------------- > > > > > > + AHB |Cacheable |Bufferable |Privilegge |Data > > > > > > + AXI3 |Write Allocate|Read Allocate|Cacheable |Bufferable > > > > > > + AXI4 |Allocate Other|Allocate |Modifiable |Bufferable > > > > > > + AXI4 |Other Allocate|Allocate |Modifiable |Bufferable > > > > > > + Native |Same as AXI |Same as AXI |Same as AXI|Same as AXI > > > > > > + ---------------------------------------------------------------- > > > > > > + The AHB, AXI3, AXI4, and PCIe busses use different names for certain > > > > > > + signals, which have the same meaning: > > > > > > + Bufferable = Posted > > > > > > + Cacheable = Modifiable = Snoop (negation of No Snoop) > > > > > > + $ref: /schemas/types.yaml#/definitions/uint8 > > > > > > + maxItem: 15 > > > > > > + > > > > > > + snps,des-rd-reqinfo: > > > > > > + description: Value for DESRDREQIN of GSBUSCFG0 register. ref > > > > > > + snps,des-wr-reqinfo > > > > > > + $ref: /schemas/types.yaml#/definitions/uint8 > > > > > > + maxItem: 15 > > > > > > + > > > > > > + snps,dat-wr-reqinfo: > > > > > > + description: Value for DATWRREQIN of GSBUSCFG0 register. ref > > > > > > + snps,des-wr-reqinfo > > > > > > + $ref: /schemas/types.yaml#/definitions/uint8 > > > > > > + maxItem: 15 > > > > > > + > > > > > > + snps,des-wr-reqinfo: > > > > > > + description: Value for DATWRREQIN of GSBUSCFG0 register. ref > > > > > > + snps,des-wr-reqinfo > > > > > > + $ref: /schemas/types.yaml#/definitions/uint8 > > > > > > + maxItem: 15 > > > > > > + > > > > > > num-hc-interrupters: > > > > > > maximum: 8 > > > > > > default: 1 > > > > > > -- > > > > > > 2.34.1 > > > > > > > > > > > > > > > > > >
