Rename 'snps,host-vbus-glitches-quirk' to 'snps,host-vbus-glitches'.
Just describe the problem in the binding. So needn't 'quirk'.
Update description.
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 8f5d250070c78..6685e6579e64c 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -273,11 +273,12 @@ properties:
with an external supply.
type: boolean
- snps,host-vbus-glitches-quirk:
+ snps,host-vbus-glitches:
description:
When set, power off all Root Hub ports immediately after
setting host mode to avoid vbus (negative) glitch happen in later
- xhci reset. And the vbus will back to 5V automatically when reset done.
+ xhci reset. And the vbus will return to 5V automatically when reset
+ done.
type: boolean
snps,is-utmi-l1-suspend:
--
2.34.1
