On Wed, 31 Jan 2024 at 09:49, Luca Weiss <luca.weiss@xxxxxxxxxxxxx> wrote: > > On Tue Jan 30, 2024 at 8:32 PM CET, Dmitry Baryshkov wrote: > > The Qualcomm PMI632 PMIC (found on Qualcomm Robotics RB2 platform) > > doesn't support USB Power Delivery. However this PMIC still supports > > handling of the Type-C port (orientation detection, etc). Reuse exiting > > qcom-pmic-typec driver to support Type-C related functionality of this > > PMIC. Use this to enable USB-C connector support on the RB2 platform. > > Hi Dmitry, > > In case you send a new revision you can drop my Tested-by on the RB2 > patches since it's a different platform, and the tag on the dt-bindings > patches also don't make too much sense I think? Ack, I will. But I hope there will be no next revision. > > Thanks! > > Regards > Luca > > > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> > > --- > > Changes in v3: > > - Added constraints to qcom,pmic-typec / reg property (Krzysztof) > > - Dropped merged TCPM and Qualcomm PHY patches > > - Link to v2: https://lore.kernel.org/r/20240113-pmi632-typec-v2-0-182d9aa0a5b3@xxxxxxxxxx > > > > Changes in v2: > > - Split qcom_pmic_typec_pdphy_set_roles() changes to separate patch > > (Konrad) > > - Simplified devm_kzalloc / sizeof() argument (Konrad) > > - Made start / stop callbacks mandatory (Bryan) > > - Reworked Type-C port handling into a backend similar to PD PHY (Bryan) > > - Made more qcom-pmic-typec data static const (Bryan) > > - Squashed usbc PHY single-lane removal patch (Konrad) > > - Further usbc PHY cleanup (Konrad) > > - Fixed order of DT properties in pmi632.dtsi (Konrad) > > - Instead of specifying bogus PDOs for the port, specify pd-disable and > > typec-power-opmode properties for the connector > > - Moved orientation-switch / usb-dual-role properties to sm6115.dtsi > > (Konrad) > > - Linked usb_dwc3_ss and usb_qmpphy_usb_ss_in > > - Link to v1: https://lore.kernel.org/r/20240113-pmi632-typec-v1-0-de7dfd459353@xxxxxxxxxx > > > > --- > > Dmitry Baryshkov (5): > > dt-bindings: regulator: qcom,usb-vbus-regulator: add support for PMI632 > > dt-bindings: usb: qcom,pmic-typec: add support for the PMI632 block > > usb: typec: qcom-pmic-typec: add support for PMI632 PMIC > > arm64: dts: qcom: pmi632: define USB-C related blocks > > arm64: dts: qcom: qrb4210-rb2: enable USB-C port handling > > > > Vladimir Zapolskiy (1): > > arm64: dts: qcom: sm6115: drop pipe clock selection > > > > .../regulator/qcom,usb-vbus-regulator.yaml | 9 ++- > > .../devicetree/bindings/usb/qcom,pmic-typec.yaml | 32 ++++++++- > > arch/arm64/boot/dts/qcom/pmi632.dtsi | 30 ++++++++ > > arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 50 +++++++++++++- > > arch/arm64/boot/dts/qcom/sm6115.dtsi | 44 +++++++++++- > > drivers/usb/typec/tcpm/qcom/Makefile | 3 +- > > drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c | 30 ++++++-- > > .../usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h | 2 + > > .../typec/tcpm/qcom/qcom_pmic_typec_pdphy_stub.c | 80 ++++++++++++++++++++++ > > 9 files changed, 266 insertions(+), 14 deletions(-) > > --- > > base-commit: 41d66f96d0f15a0a2ad6fa2208f6bac1a66cbd52 > > change-id: 20240112-pmi632-typec-4c7533092387 > > > > Best regards, > -- With best wishes Dmitry
