Define VBUS regulator and the Type-C handling block as present on the Quacomm PMI632 PMIC. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Tested-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx> # sdm632-fairphone-fp3 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/pmi632.dtsi | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi index 4eb79e0ce40a..d6832f0b7b80 100644 --- a/arch/arm64/boot/dts/qcom/pmi632.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi @@ -45,6 +45,36 @@ pmic@2 { #address-cells = <1>; #size-cells = <0>; + pmi632_vbus: usb-vbus-regulator@1100 { + compatible = "qcom,pmi632-vbus-reg", "qcom,pm8150b-vbus-reg"; + reg = <0x1100>; + status = "disabled"; + }; + + pmi632_typec: typec@1500 { + compatible = "qcom,pmi632-typec"; + reg = <0x1500>; + interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect"; + vdd-vbus-supply = <&pmi632_vbus>; + + status = "disabled"; + }; + pmi632_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; -- 2.39.2