On Wed, Jan 31, 2024 at 07:43:18PM +0800, Xu Yang wrote:
> Add USB nodes on i.MX8ULP platform which has 2 USB controllers.
>
> Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>
>
> ---
> Changes in v2:
> - no changes
> Changes in v3:
> - no changes
> Changes in v4:
> - no changes
> Changes in v5:
> - no changes
> ---
> arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 64 ++++++++++++++++++++++
> 1 file changed, 64 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> index c4a0082f30d3..ead1f57e08ef 100644
> --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> @@ -28,6 +28,8 @@ aliases {
> serial1 = &lpuart5;
> serial2 = &lpuart6;
> serial3 = &lpuart7;
> + usbphy0 = &usbphy1;
> + usbphy1 = &usbphy2;
Drop these. We have no use for aliases to phys.
> };
>
> cpus {
> @@ -472,6 +474,68 @@ usdhc2: mmc@298f0000 {
> status = "disabled";
> };
>
> + usbotg1: usb@29900000 {
> + compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
> + reg = <0x29900000 0x200>;
> + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&pcc4 IMX8ULP_CLK_USB0>;
> + power-domains = <&scmi_devpd IMX8ULP_PD_USB0>;
> + phys = <&usbphy1>;
> + fsl,usbmisc = <&usbmisc1 0>;
> + ahb-burst-config = <0x0>;
> + tx-burst-size-dword = <0x8>;
> + rx-burst-size-dword = <0x8>;
> + status = "disabled";
> + };
> +
> + usbmisc1: usbmisc@29900200 {
> + compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7d-usbmisc",
> + "fsl,imx6q-usbmisc";
> + #index-cells = <1>;
Deprecated. Why are you using this?
Rob
