On Mon, Jan 22, 2024 at 12:04:46PM +0100, AngeloGioacchino Del Regno wrote:
> The ITE IT5202 is a USB Type-C Alternate Mode Passive MUX, used for
> muxing the SBU lines of a Type-C port with DisplayPort altmode and
> also providing an orientation switch.
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> ---
> drivers/usb/typec/mux/Kconfig | 10 ++
> drivers/usb/typec/mux/Makefile | 1 +
> drivers/usb/typec/mux/it5205.c | 294 +++++++++++++++++++++++++++++++++
> 3 files changed, 305 insertions(+)
> create mode 100644 drivers/usb/typec/mux/it5205.c
>
> diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
> index d2cb5e733e57..399c7b0983df 100644
> --- a/drivers/usb/typec/mux/Kconfig
> +++ b/drivers/usb/typec/mux/Kconfig
> @@ -36,6 +36,16 @@ config TYPEC_MUX_INTEL_PMC
> control the USB role switch and also the multiplexer/demultiplexer
> switches used with USB Type-C Alternate Modes.
>
> +config TYPEC_MUX_IT5205
> + tristate "ITE IT5205 Type-C USB Alt Mode Passive MUX driver"
> + depends on I2C
> + select REGMAP_I2C
> + help
> + Driver for the ITE IT5205 Type-C USB Alternate Mode Passive MUX
> + which provides support for muxing DisplayPort and sideband signals
> + on a common USB Type-C connector.
> + If compiled as a module, the module will be named it5205.
> +
> config TYPEC_MUX_NB7VPQ904M
> tristate "On Semiconductor NB7VPQ904M Type-C redriver driver"
> depends on I2C
> diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile
> index 57dc9ac6f8dc..bb96f30267af 100644
> --- a/drivers/usb/typec/mux/Makefile
> +++ b/drivers/usb/typec/mux/Makefile
> @@ -4,6 +4,7 @@ obj-$(CONFIG_TYPEC_MUX_FSA4480) += fsa4480.o
> obj-$(CONFIG_TYPEC_MUX_GPIO_SBU) += gpio-sbu-mux.o
> obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o
> obj-$(CONFIG_TYPEC_MUX_INTEL_PMC) += intel_pmc_mux.o
> +obj-$(CONFIG_TYPEC_MUX_IT5205) += it5205.o
> obj-$(CONFIG_TYPEC_MUX_NB7VPQ904M) += nb7vpq904m.o
> obj-$(CONFIG_TYPEC_MUX_PTN36502) += ptn36502.o
> obj-$(CONFIG_TYPEC_MUX_WCD939X_USBSS) += wcd939x-usbss.o
> diff --git a/drivers/usb/typec/mux/it5205.c b/drivers/usb/typec/mux/it5205.c
> new file mode 100644
> index 000000000000..5535932e42cd
> --- /dev/null
> +++ b/drivers/usb/typec/mux/it5205.c
> @@ -0,0 +1,294 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * ITE IT5205 Type-C USB alternate mode passive mux
> + *
> + * Copyright (c) 2020 MediaTek Inc.
> + * Copyright (c) 2024 Collabora Ltd.
> + * AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
> + *
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/usb/tcpm.h>
> +#include <linux/usb/typec.h>
> +#include <linux/usb/typec_dp.h>
> +#include <linux/usb/typec_mux.h>
> +
> +#define IT5205_REG_CHIP_ID(x) (0x4 + (x))
> +#define IT5205FN_CHIP_ID 0x35323035 /* "5205" */
> +
> +/* MUX power down register */
> +#define IT5205_REG_MUXPDR 0x10
> +#define IT5205_MUX_POWER_DOWN BIT(0)
> +
> +/* MUX control register */
> +#define IT5205_REG_MUXCR 0x11
> +#define IT5205_POLARITY_INVERTED BIT(4)
> +#define IT5205_DP_USB_CTRL_MASK GENMASK(3, 0)
> +#define IT5205_DP 0x0f
> +#define IT5205_DP_USB 0x03
> +#define IT5205_USB 0x07
> +
> +/* Vref Select Register */
> +#define IT5205_REG_VSR 0x10
> +#define IT5205_VREF_SELECT_MASK GENMASK(5, 4)
> +#define IT5205_VREF_SELECT_3_3V 0x00
> +#define IT5205_VREF_SELECT_OFF 0x20
> +
> +/* CSBU Over Voltage Protection Register */
> +#define IT5205_REG_CSBUOVPSR 0x1e
> +#define IT5205_OVP_SELECT_MASK GENMASK(5, 4)
> +#define IT5205_OVP_3_90V 0x00
> +#define IT5205_OVP_3_68V 0x10
> +#define IT5205_OVP_3_62V 0x20
> +#define IT5205_OVP_3_57V 0x30
> +
> +/* CSBU Switch Register */
> +#define IT5205_REG_CSBUSR 0x22
> +#define IT5205_CSBUSR_SWITCH BIT(0)
> +
> +/* Interrupt Switch Register */
> +#define IT5205_REG_ISR 0x25
> +#define IT5205_ISR_CSBU_MASK BIT(4)
> +#define IT5205_ISR_CSBU_OVP BIT(0)
> +
> +struct it5205 {
> + struct i2c_client *client;
> + struct regmap *regmap;
> + struct typec_switch_dev *sw;
> + struct typec_mux_dev *mux;
> +};
> +
> +static int it5205_switch_set(struct typec_switch_dev *sw, enum typec_orientation orientation)
> +{
> + struct it5205 *it = typec_switch_get_drvdata(sw);
> +
> + switch (orientation) {
> + case TYPEC_ORIENTATION_NORMAL:
> + regmap_update_bits(it->regmap, IT5205_REG_MUXCR,
> + IT5205_POLARITY_INVERTED, 0);
> + break;
> + case TYPEC_ORIENTATION_REVERSE:
> + regmap_update_bits(it->regmap, IT5205_REG_MUXCR,
> + IT5205_POLARITY_INVERTED, IT5205_POLARITY_INVERTED);
> + break;
> + case TYPEC_ORIENTATION_NONE:
> + fallthrough;
> + default:
> + regmap_write(it->regmap, IT5205_REG_MUXCR, 0);
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static int it5205_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
> +{
> + struct it5205 *it = typec_mux_get_drvdata(mux);
> + u8 val;
> +
> + if (state->mode >= TYPEC_STATE_MODAL &&
> + state->alt->svid != USB_TYPEC_DP_SID)
> + return -EINVAL;
> +
> + switch (state->mode) {
> + case TYPEC_STATE_USB:
> + val = IT5205_USB;
> + break;
> + case TYPEC_DP_STATE_C:
> + fallthrough;
> + case TYPEC_DP_STATE_E:
> + val = IT5205_DP;
> + break;
> + case TYPEC_DP_STATE_D:
> + val = IT5205_DP_USB;
> + break;
> + case TYPEC_STATE_SAFE:
> + fallthrough;
> + default:
> + val = 0;
> + break;
> + }
> +
> + return regmap_update_bits(it->regmap, IT5205_REG_MUXCR,
> + IT5205_DP_USB_CTRL_MASK, val);
> +}
> +
> +static irqreturn_t it5205_irq_handler(int irq, void *data)
> +{
> + struct it5205 *it = data;
> + int ret;
> + u32 val;
> +
> + ret = regmap_read(it->regmap, IT5205_REG_ISR, &val);
> + if (ret)
> + return IRQ_NONE;
> +
> + if (val & IT5205_ISR_CSBU_OVP) {
> + dev_warn(&it->client->dev, "Overvoltage detected!\n");
> +
> + /* Reset CSBU */
> + regmap_update_bits(it->regmap, IT5205_REG_CSBUSR,
> + IT5205_CSBUSR_SWITCH, 0);
> + regmap_update_bits(it->regmap, IT5205_REG_CSBUSR,
> + IT5205_CSBUSR_SWITCH, IT5205_CSBUSR_SWITCH);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void it5205_enable_ovp(struct it5205 *it)
> +{
> + /* Select Vref 3.3v */
> + regmap_update_bits(it->regmap, IT5205_REG_VSR,
> + IT5205_VREF_SELECT_MASK, IT5205_VREF_SELECT_3_3V);
> +
> + /* Trigger OVP at 3.68V */
> + regmap_update_bits(it->regmap, IT5205_REG_CSBUOVPSR,
> + IT5205_OVP_SELECT_MASK, IT5205_OVP_3_68V);
> +
> + /* Unmask OVP interrupt */
> + regmap_update_bits(it->regmap, IT5205_REG_ISR,
> + IT5205_ISR_CSBU_MASK, 0);
> +
> + /* Enable CSBU Interrupt */
> + regmap_update_bits(it->regmap, IT5205_REG_CSBUSR,
> + IT5205_CSBUSR_SWITCH, IT5205_CSBUSR_SWITCH);
> +}
> +
> +static const struct regmap_config it5205_regmap = {
> + .max_register = 0x2f,
> + .reg_bits = 8,
> + .val_bits = 8,
> +};
> +
> +static int it5205_probe(struct i2c_client *client)
> +{
> + struct typec_switch_desc sw_desc = { };
> + struct typec_mux_desc mux_desc = { };
> + struct device *dev = &client->dev;
> + struct it5205 *it;
> + u32 val, chipid = 0;
> + int i, ret;
> +
> + it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL);
> + if (!it)
> + return -ENOMEM;
> +
> + ret = devm_regulator_get_enable(dev, "vcc");
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to get regulator\n");
> +
> + it->client = client;
> +
> + it->regmap = devm_regmap_init_i2c(client, &it5205_regmap);
> + if (IS_ERR(it->regmap))
> + return dev_err_probe(dev, PTR_ERR(it->regmap),
> + "Failed to init regmap\n");
> +
> + /* IT5205 needs a long time to power up after enabling regulator */
> + msleep(50);
> +
> + /* Unset poweroff bit */
> + ret = regmap_write(it->regmap, IT5205_REG_MUXPDR, 0);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to set power on\n");
> +
> + /* Read the 32 bits ChipID */
> + for (i = 3; i >= 0; i--) {
> + ret = regmap_read(it->regmap, IT5205_REG_CHIP_ID(i), &val);
> + if (ret)
> + return ret;
> +
> + chipid |= val << (i * 8);
> + }
> +
> + if (chipid != IT5205FN_CHIP_ID)
> + return dev_err_probe(dev, -EINVAL,
> + "Unknown ChipID 0x%x\n", chipid);
> +
> + /* Initialize as USB mode with default (non-inverted) polarity */
> + ret = regmap_write(it->regmap, IT5205_REG_MUXCR, IT5205_USB);
> + if (ret)
> + return dev_err_probe(dev, ret, "Cannot set mode to USB\n");
> +
> + sw_desc.drvdata = it;
> + sw_desc.fwnode = dev_fwnode(dev);
> + sw_desc.set = it5205_switch_set;
> +
> + it->sw = typec_switch_register(dev, &sw_desc);
> + if (IS_ERR(it->sw))
> + return dev_err_probe(dev, PTR_ERR(it->sw),
> + "failed to register typec switch\n");
> +
> + mux_desc.drvdata = it;
> + mux_desc.fwnode = dev_fwnode(dev);
> + mux_desc.set = it5205_mux_set;
> +
> + it->mux = typec_mux_register(dev, &mux_desc);
> + if (IS_ERR(it->mux)) {
> + typec_switch_unregister(it->sw);
> + return dev_err_probe(dev, PTR_ERR(it->mux),
> + "failed to register typec mux\n");
> + }
> +
> + i2c_set_clientdata(client, it);
> +
> + if (of_property_read_bool(dev->of_node, "ite,ovp-enable") && client->irq) {
> + it5205_enable_ovp(it);
> +
> + ret = devm_request_threaded_irq(dev, client->irq, NULL,
> + it5205_irq_handler,
> + IRQF_ONESHOT, dev_name(dev), it);
> + if (ret) {
> + typec_mux_unregister(it->mux);
> + typec_switch_unregister(it->sw);
> + return dev_err_probe(dev, ret, "Failed to request irq\n");
> + }
> + }
> +
> + return 0;
> +}
> +
> +static void it5205_remove(struct i2c_client *client)
> +{
> + struct it5205 *it = i2c_get_clientdata(client);
> +
> + typec_mux_unregister(it->mux);
> + typec_switch_unregister(it->sw);
> +}
> +
> +static const struct i2c_device_id it5205_table[] = {
> + { "it5205" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(i2c, it5205_table);
> +
> +static const struct of_device_id it5205_of_table[] = {
> + { .compatible = "ite,it5205" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, it5205_of_table);
> +
> +static struct i2c_driver it5205_driver = {
> + .driver = {
> + .name = "it5205",
> + .of_match_table = it5205_of_table,
> + },
> + .probe = it5205_probe,
> + .remove = it5205_remove,
> + .id_table = it5205_table,
> +};
> +module_i2c_driver(it5205_driver);
> +
> +MODULE_AUTHOR("Tianping Fang <tianping.fang@xxxxxxxxxxxx>");
> +MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("ITE IT5205 alternate mode passive MUX driver");
> +MODULE_LICENSE("GPL");
> --
> 2.43.0
--
heikki
