Linux USB Users

• Thread Index

• Re: [PATCH] usb: phy: tahvo: Use devm_extcon_dev_* function for resource management of extcon
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] ARM: dts: am33xx: Move the cppi41dma node so it's probed early
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb_dsps: fix the exit routine for debugfs
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: musb_dsps: fix the exit routine for debugfs
  • From: Olivier Gayot <ogayot@xxxxxxxxxxxx>
• [PATCH 0/3] dts: exynos5: Add required VDD supplies for USB
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 1/3] dts: exynos5250: Add required VDD regulator supplies for usb
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am33xx: Move the cppi41dma node so it's probed early
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/3] dts: exynos5250-snow: Add required VDD regulator supplies for usb
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 3/3] dts: exynos5420-smdk5420: Add required VDD regulator supplies for usb
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH 2/8] usb: host: xhci-plat: Add support for the Armada 38x glue code
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: 3.15-rc1 and gether bug
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Sometimes USB 3.0 disk can't run in SuperSpeed in AMD XHCI controller [1022:7814]
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 01/19] usb: phy: msm: Make driver selectable on ARCH_QCOM
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/9] Enable USB 3.0 support on Exynos5 systems
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v5 1/9] dt: exynos5420: Enable support for USB 3.0 PHY controller
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v5 3/9] dt: exynos5250: Enable support for generic USB DRD phy
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v5 2/9] dt: exynos5420: Enable support for DWC3 controller
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v5 4/9] dts: exynos5250: Update DWC3 usb controller to use new phy driver
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH v6 15/19] usb: phy: msm: Fix PTS definitions for MSM USB controller
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v5 6/9] dts: exynos5420-peach-pit: Add Vbus regulator for USB 3.0
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v5 5/9] dts: exynos5250-snow: Add Vbus regulator for USB 3.0
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v5 7/9] dts: exynos5420-smdk5420: Add Vbus regulator for USB 3.0
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v5 9/9] ARM: exynos_defconfig: Remove SAMSUNG_USB3PHY config
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v5 8/9] usb-phy: samsung-usb3: Remove older phy-samsung-usb3 driver
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH] USB: serial: fix sysfs-attribute removal deadlock
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH v6 15/19] usb: phy: msm: Fix PTS definitions for MSM USB controller
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH v6 15/19] usb: phy: msm: Fix PTS definitions for MSM USB controller
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 15/19] usb: phy: msm: Fix PTS definitions for MSM USB controller
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH v6 15/19] usb: phy: msm: Fix PTS definitions for MSM USB controller
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 15/19] usb: phy: msm: Fix PTS definitions for MSM USB controller
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH v6 15/19] usb: phy: msm: Fix PTS definitions for MSM USB controller
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v4 0/3] usb: chipidea: msm: Clean and fix glue layer driver
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v4 1/3] usb: chipidea: msm: Add device tree binding information
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH 2/3] usb: ehci-exynos: Make provision for vdd regulators
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH 1/3] usb: ohci-exynos: Make provision for vdd regulators
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH v4 3/3] usb: chipidea: msm: Initialize offset of the capability registers
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH 3/3] usb: dwc3-exynos: Make provision for vdd regulators
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH v4 2/3] usb: chipidea: msm: Add device tree support
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: 3.15-rc1 and gether bug
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH 3/3] usb: dwc3-exynos: Make provision for vdd regulators
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• RE: [PATCH 3/3] usb: dwc3-exynos: Make provision for vdd regulators
  • From: Anton Tikhomirov <av.tikhomirov@xxxxxxxxxxx>
• Re: [PATCH 3/3] usb: dwc3-exynos: Make provision for vdd regulators
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH] USB: serial: fix sysfs-attribute removal deadlock
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH v3 0/3] usb: chipidea: msm: Clean and fix glue layer driver
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• RE: [PATCH 3/3] usb: dwc3-exynos: Make provision for vdd regulators
  • From: Anton Tikhomirov <av.tikhomirov@xxxxxxxxxxx>
• [PATCH 02/19] usb: chipidea: coordinate usb phy initialization for different phy type
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 04/19] usb: chipidea: export interrupt enable and status register read functions
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 05/19] usb: chipidea: debug: add debug file for controller registers dump
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 10/19] usb: chipidea: host: vbus control change for OTG HNP
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 07/19] usb: chipidea: core: Add missing module owner field
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 03/19] usb: chipidea: operate on otgsc register in a general way
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 15/19] usb: chipidea: OTG HNP and SRP fsm implementation
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 18/19] Documentation: ABI: usb: sysfs Description for chipidea USB OTG HNP and SRP
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 16/19] usb: chipidea: add sys inputs for OTG fsm input
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 14/19] usb: chipidea: OTG fsm timers initialization
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 19/19] Documentation: usb: add chipidea.txt for how to demo usb OTG HNP and SRP
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 11/19] usb: chipidea: host: init otg port number
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 17/19] usb: chipidea: debug: add debug file for OTG variables
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 13/19] usb: chipidea: add OTG fsm operation functions implementation
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 08/19] usb: phy: otg-fsm: export symbol of otg_statemachine
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 12/19] usb: chipidea: udc: driver update for OTG HNP
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 00/19] Chipidea Patches for v3.16
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 09/19] usb: chipidea: usb OTG fsm initialization.
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 06/19] usb: chipidea: add proper delay for waiting correct PHY status
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 01/19] usb: chipidea: usbmisc: Add USB support for i.MX25/i.MX35 CPUs
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v12 00/12] Add USB OTG HNP and SRP support on Chipidea usb driver
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v6 01/19] usb: phy: msm: Make driver selectable on ARCH_QCOM
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH] usb: serial: Add USB identifier for the Motorola/Telit H24 HSPA module
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 11/19] usb: phy: msm: Add device tree support and binding information
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH 2/8] usb: host: xhci-plat: Add support for the Armada 38x glue code
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ohci-exynos: Add facility to use phy provided by the generic phy framework
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH] usb: ohci-exynos: Add facility to use phy provided by the generic phy framework
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH v2 05/13] extcon: extcon-class: improve extcon client API
  • From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
• Re: [PATCH v6 06/19] usb: phy: msm: Fix checkpatch.pl warnings
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH 1/1] usb: chipidea: coordinate usb phy initialization for different phy type
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 0/1] Chipidea Fix for v3.15
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: gadget: Add xilinx axi usb2 device support
  • From: sundeep subbaraya <sundeep.lkml@xxxxxxxxx>
• [PATCH] usb: phy: tahvo: Use devm_extcon_dev_* function for resource management of extcon
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• RE: [RESEND PATCH 1/1] usb: phy: delete CONFIG_USB_OTG_FSM
  • From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
• Re: MAX3421E Linux driver?
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: MAX3421E Linux driver?
  • From: Dan <anudhan88@xxxxxxxxx>
• Re: musb gadget @ full speed
  • From: ian coolidge <iancoolidge@xxxxxxxxx>
• Re: [PATCH v2 01/13] Documentation: add extcon devicetree bindings
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] USB: musb: dsps: move debugfs_remove_recursive()
  • From: Greg KH <greg@xxxxxxxxx>
• Re: problem with resume after s2ram
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ohci-exynos: Add facility to use phy provided by the generic phy framework
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ohci-exynos: Add facility to use phy provided by the generic phy framework
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: musb gadget @ full speed
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 11/19] usb: phy: msm: Add device tree support and binding information
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v6 06/19] usb: phy: msm: Fix checkpatch.pl warnings
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH] USB: musb: dsps: move debugfs_remove_recursive()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 01/19] usb: phy: msm: Make driver selectable on ARCH_QCOM
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 03/19] usb: phy: msm: Move global regulators variables to driver state
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 01/19] usb: phy: msm: Make driver selectable on ARCH_QCOM
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH] USB: musb: dsps: move debugfs_remove_recursive()
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 04/19] usb: phy: msm: Migrate to Managed Device Resource allocation
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH v3 1/3] usb: chipidea: msm: Add device tree binding information
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH v6 03/19] usb: phy: msm: Move global regulators variables to driver state
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• Re: [PATCH v2 05/13] extcon: extcon-class: improve extcon client API
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH v3 1/3] usb: chipidea: msm: Add device tree binding information
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v6 04/19] usb: phy: msm: Migrate to Managed Device Resource allocation
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v6 03/19] usb: phy: msm: Move global regulators variables to driver state
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 01/19] usb: phy: msm: Make driver selectable on ARCH_QCOM
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 05/13] extcon: extcon-class: improve extcon client API
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] usb: dwc3: core: Fix gadget for system suspend/resume
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 2/2] usb: gadget: Add xilinx axi usb2 device support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: musb: dsps: move debugfs_remove_recursive()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/4] dwc3: host: Set xhci lpm support quirk
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] ARM: dts: am33xx: Move the cppi41dma node so it's probed early
  • From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
• Re: Buffer I/O error after s2ram with usb storage persistance
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: musb: dsps: move debugfs_remove_recursive()
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: gadget: Add xilinx axi usb2 device support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 15/19] usb: phy: msm: Fix PTS definitions for MSM USB controller
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: Buffer I/O error after s2ram with usb storage persistance
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: [PATCH v2] usb: gadget: zero: Fix SuperSpeed enumeration for alternate setting 1
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Bugs in xhci-hcd isochronous support
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: gadget: zero: Fix SuperSpeed enumeration for alternate setting 1
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2] usb: dwc3: core: Fix gadget for system suspend/resume
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RESEND] [PATCH] xhci: Switch Intel Lynx Point ports to EHCI on shutdown.
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 1/5] usb: xhci: Prefer endpoint context dequeue pointer over stopped_trb
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 0/5] xhci: fixes for 3.15-rc usb-linus
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 2/5] xhci: Use pci_enable_msix_exact() instead of pci_enable_msix()
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 4/5] xhci: extend quirk for Renesas cards
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 3/5] xhci: Switch Intel Lynx Point ports to EHCI on shutdown.
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 5/5] usb/xhci: fix compilation warning when !CONFIG_PCI && !CONFIG_PM
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH v6 1/2] phy: Add new Exynos5 USB 3.0 PHY driver
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v6 2/2] phy: exynos5-usbdrd: Add facility for VBUS supply
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: External hard drive connection issues with xHCI
  • From: "Dainius (GreatEmerald)" <pastas4@xxxxxxxxx>
• Re: [RESEND] [PATCH] xhci: Switch Intel Lynx Point ports to EHCI on shutdown.
  • From: Denis Turischev <denis.turischev@xxxxxxxxxxxxxx>
• [PATCH v3 0/3] usb: chipidea: msm: Clean and fix glue layer driver
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v3 1/3] usb: chipidea: msm: Add device tree binding information
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v3 3/3] usb: chipidea: msm: Initialize offset of the capability registers
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v3 2/3] usb: chipidea: msm: Add device tree support
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 07/19] usb: phy: msm: Replace custom enum usb_mode_type with enum usb_dr_mode
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 08/19] usb: phy: msm: Remove unused pclk_src_name
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 06/19] usb: phy: msm: Fix checkpatch.pl warnings
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 09/19] usb: phy: msm: Remove HSUSB prefix from regulator names
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 03/19] usb: phy: msm: Move global regulators variables to driver state
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 04/19] usb: phy: msm: Migrate to Managed Device Resource allocation
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 05/19] usb: phy: msm: Remove unnecessarily check for valid regulators.
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 10/19] usb: phy: msm: Properly check result from platform_get_irq()
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 11/19] usb: phy: msm: Add device tree support and binding information
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 12/19] usb: phy: msm: Use reset framework for LINK and PHY resets
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 01/19] usb: phy: msm: Make driver selectable on ARCH_QCOM
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 02/19] usb: phy: msm: Remove __init macro from driver probe method
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 18/19] usb: phy: msm: Vote for corner of VDD CX instead of voltage of VDD CX
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 16/19] usb: phy: msm: Select secondary PHY via TCSR
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 15/19] usb: phy: msm: Fix PTS definitions for MSM USB controller
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 13/19] usb: phy: msm: Add support for secondary PHY control
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 14/19] usb: phy: msm: Correct USB PHY Reset sequence for newer platform
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 19/19] usb: phy: msm: Use usb_add_phy_dev() to register device
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 17/19] usb: phy: msm: Handle disconnect events
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v6 00/19] usb: phy: msm: Fixes, cleanups and DT support
  • From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
• [PATCH v5 1/2] phy: Add new Exynos5 USB 3.0 PHY driver
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v5 2/2] phy: exynos5-usbdrd: Add facility for VBUS supply
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v5 0/2] Add Exynos5 USB 3.0 phy driver based on generic PHY framework
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: Bugs in xhci-hcd isochronous support
  • From: Russel Hughes <russel.hughes@xxxxxxxxx>
• Re: problem with resume after s2ram
  • From: Peter Münster <pmlists@xxxxxxx>
• Re: [PATCH v2 2/2] usb: gadget: Add xilinx axi usb2 device support
  • From: sundeep subbaraya <sundeep.lkml@xxxxxxxxx>
• RE: [RESEND PATCH 1/1] usb: phy: delete CONFIG_USB_OTG_FSM
  • From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 05/13] extcon: extcon-class: improve extcon client API
  • From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
• RE: [PATCH v12 01/12] usb: phy: otg-fsm: export symbol of otg_statemachine
  • From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] dwc3: host: Set xhci lpm support quirk
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [RESEND PATCH 1/1] usb: phy: delete CONFIG_USB_OTG_FSM
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RESEND PATCH 1/1] usb: phy: delete CONFIG_USB_OTG_FSM
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v12 01/12] usb: phy: otg-fsm: export symbol of otg_statemachine
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/4] dwc3: host: Set xhci lpm support quirk
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/4] usb: allow lpm (en/dis)able only if device is atleast in default state
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 3/4] dwc3: host: Set xhci lpm support quirk
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 2/4] xhci: Platform: Add (en/dis)able_usb3_lpm_timeout
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 1/4] xhci: A default implementation for Ux timeout calculation and tier policy check
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH 0/4] Enable U1/U2 initiation from dwc3 xhci host
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH v12 08/12] usb: chipidea: OTG HNP and SRP fsm implementation.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v12 07/12] usb: chipidea: OTG fsm timers initialization.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v12 04/12] usb: chipidea: host: init otg port number.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v12 01/12] usb: phy: otg-fsm: export symbol of otg_statemachine
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v12 05/12] usb: chipidea: udc: driver update for OTG HNP.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v12 10/12] usb: chipidea: debug: add debug file for OTG variables
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v12 02/12] usb: chipidea: usb OTG fsm initialization.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v12 09/12] usb: chipidea: add sys inputs for OTG fsm input.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v12 06/12] usb: chipidea: add OTG fsm operation functions implemenation.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v12 11/12] Documentation: ABI: usb: sysfs Description for chipidea USB OTG HNP and SRP
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v12 12/12] Documentation: usb: add chipidea.txt for how to demo usb OTG HNP and SRP
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v12 03/12] usb: chipidea: host: vbus control change for OTG HNP.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v12 00/12] Add USB OTG HNP and SRP support on Chipidea usb driver
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: otg-fsm: export symbol of otg_statemachine
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Bugs in xhci-hcd isochronous support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: xHCI USB2 test modes
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: xHCI USB2 test modes
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: ohci-exynos: Add facility to use phy provided by the generic phy framework
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH 03/10] usb: phy: mv-u3d: switch over to writel/readl
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 03/10] usb: phy: mv-u3d: switch over to writel/readl
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 05/10] usb: gadget: only GPL drivers in the gadget and phy framework
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: phy: msm: Select secondary PHY via TCSR
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: phy: msm: Select secondary PHY via TCSR
  • From: Tim Bird <tbird20d@xxxxxxxxx>
• USB3 drive not detected at boot, but recognized when reconnected
  • From: Nicolas Moeri <nicolas@xxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: gadget: Add xilinx axi usb2 device support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: msm: Select secondary PHY via TCSR
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/3] USB: musb: add reset hook to platform ops
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 2/2] usb: gadget: Add xilinx axi usb2 device support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/3] USB: musb: add reset hook to platform ops
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• [PATCH 05/10] usb: gadget: only GPL drivers in the gadget and phy framework
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 07/10] usb: phy: rename <linux/usb/usb_phy_gen_xceiv.h> to <linux/usb/usb_phy_generic.h>
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 08/10] usb: musb: move usb_phy_generic_{un,}register calls to probe()/remove()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 10/10] usb: phy: generic: switch over to IS_ENABLED()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 09/10] usb: phy: generic: allow multiples calls to usb_phy_generic_register()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 03/10] usb: phy: mv-u3d: switch over to writel/readl
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 02/10] usb: dwc3: core: refactor PHY initialization
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 04/10] usb: dwc3: core: refactor mode initialization to its own function
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 06/10] usb: phy: rename usb_nop_xceiv to usb_phy_generic
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 01/10] usb: dwc3: gadget: clear stall when disabling endpoint
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 00/10] usb: generic cleanup patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: problem with resume after s2ram
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• usb fixes for v3.15-rc3
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: phy: otg-fsm: export symbol of otg_statemachine
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH 2/3] usb: ehci-exynos: Make provision for vdd regulators
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 3/3] usb: dwc3-exynos: Make provision for vdd regulators
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 1/3] usb: ohci-exynos: Make provision for vdd regulators
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller
  • From: punnaiah choudary kalluri <punnaia@xxxxxxxxxx>
• Re: [PATCH RFC 3/4] xhci: Tune PHY for the DWC3-Exynos host controller
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v11 02/11] usb: chipidea: host: vbus control change for OTG HNP.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v11 03/11] usb: chipidea: host: init otg port number.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v11 10/11] Documentation: ABI: usb: sysfs Description for chipidea USB OTG HNP and SRP
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v11 07/11] usb: chipidea: OTG HNP and SRP fsm implementation.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v11 08/11] usb: chipidea: add sys inputs for OTG fsm input.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v11 06/11] usb: chipidea: OTG fsm timers initialization.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v11 05/11] usb: chipidea: add OTG fsm operation functions implemenation.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v11 11/11] Documentation: usb: add chipidea.txt for how to demo usb OTG HNP and SRP
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v11 09/11] usb: chipidea: debug: add debug file for OTG variables
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v11 00/11] Add USB OTG HNP and SRP support on Chipidea usb driver
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v11 04/11] usb: chipidea: udc: driver update for OTG HNP.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• [PATCH v11 01/11] usb: chipidea: usb OTG fsm initialization.
  • From: Li Jun <B47624@xxxxxxxxxxxxx>
• Re: 3.15-rc1 and gether bug
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: problem with resume after s2ram
  • From: Peter Münster <pmlists@xxxxxxx>
• Re: [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• 3.15-rc1 and gether bug
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 1/2] usb: gadget: fsl_udc: Add support for zynq usb device controller
  • From: Punnaiah Choudary Kalluri <punnaiah.choudary.kalluri@xxxxxxxxxx>
• [RFC PATCH 2/2] usb: ehci-fsl: Add support for zynq usb host controller
  • From: Punnaiah Choudary Kalluri <punnaiah.choudary.kalluri@xxxxxxxxxx>
• [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller
  • From: Punnaiah Choudary Kalluri <punnaiah.choudary.kalluri@xxxxxxxxxx>
• [RFC PATCH 1/2] usb: gadget: fsl_udc: Add support for zynq usb device controller
  • From: Punnaiah Choudary Kalluri <punnaiah.choudary.kalluri@xxxxxxxxxx>
• [RFC PATCH 0/2] usb: Reuse fsl driver code for synopsys usb controller
  • From: Punnaiah Choudary Kalluri <punnaiah.choudary.kalluri@xxxxxxxxxx>
• [RFC PATCH 2/2] usb: ehci-fsl: Add support for zynq usb host controller
  • From: Punnaiah Choudary Kalluri <punnaiah.choudary.kalluri@xxxxxxxxxx>
• Re: External hard drive connection issues with xHCI
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] Some update for USB OTG
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: External hard drive connection issues with xHCI
  • From: "Dainius (GreatEmerald)" <pastas4@xxxxxxxxx>
• RE: USB OTG support on mx27pdk
  • From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
• [PATCH] usb: chipidea: core: Add missing module owner field
  • From: Alexander Shiyan <shc_work@xxxxxxx>
• Re: USB OTG support on mx27pdk
  • From: Alexander Shiyan <shc_work@xxxxxxx>
• Re: [PATCH 4/8] ARM: mvebu: Add USB3 UTMI support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/8] xhci-platform: Add a new controller using xhci: Armada 38x
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/8] usb: host: xhci-plat: Add support for the Armada 38x glue code
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/8] usb: host: xhci-plat: Allow to register glue code using the device tree
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: USB OTG support on mx27pdk
  • From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
• Re: External hard drive connection issues with xHCI
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB OTG support on mx27pdk
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• External hard drive connection issues with xHCI
  • From: "Dainius (GreatEmerald)" <pastas4@xxxxxxxxx>
• Re: [PATCH v2 05/13] extcon: extcon-class: improve extcon client API
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: BBB gadgetfs freeze patch
  • From: norgan <norgan@xxxxxx>
• Re: [PATCH] fix the code style errors in sn9c102
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• RE: USB OTG support on mx27pdk
  • From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
• Re: [PATCH] fix the code style errors in sn9c102
  • From: Jianyu Zhan <nasa4836@xxxxxxxxx>
• [PATCH] fix the code style errors in sn9c102
  • From: Jinqiang Zeng <jinqiangzeng@xxxxxxxxx>
• Re: [PATCH 1/1] ARM: dts: omap5: Add clocks to USB3 PHY node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] USB fixes for 3.15-rc2
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Buffer I/O error after s2ram with usb storage persistance
  • From: Steve Cotton <steve@xxxxxxxxxxxxxxxxxxxx>
• Re: Buffer I/O error after s2ram with usb storage persistance
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Buffer I/O error after s2ram with usb storage persistance
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: problem with resume after s2ram
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 8/8] usb: phy: generic: allow multiples calls to usb_phy_generic_register()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Buffer I/O error after s2ram with usb storage persistance
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: gadget: Add xilinx axi usb2 device support
  • From: sundeep subbaraya <sundeep.lkml@xxxxxxxxx>
• Re: [PATCH 4/8] ARM: mvebu: Add USB3 UTMI support
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/8] usb: host: xhci-plat: Add support for the Armada 38x glue code
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: [PATCH 5/8] ARM: mvebu: Add Device Tree description of xHCI hosts on Armada 38x
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/8] usb: host: xhci-plat: Add support for the Armada 38x glue code
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 5/8] ARM: mvebu: Add Device Tree description of xHCI hosts on Armada 38x
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: [PATCH 4/8] ARM: mvebu: Add USB3 UTMI support
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: [PATCH 2/8] usb: host: xhci-plat: Add support for the Armada 38x glue code
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: [PATCH 8/8] usb: phy: generic: allow multiples calls to usb_phy_generic_register()
  • From: Leigh Brown <leigh@xxxxxxxxxxxxx>
• Re: [PATCH 5/8] usb: phy: rename usb_nop_xceiv to usb_phy_generic
  • From: Leigh Brown <leigh@xxxxxxxxxxxxx>
• [PATCH 1/8] usb: host: xhci-plat: Allow to register glue code using the device tree
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/8] USB3 support for Armada 38x
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• [PATCH 4/8] ARM: mvebu: Add USB3 UTMI support
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/8] usb: host: xhci-plat: Add support for the Armada 38x glue code
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• [PATCH 5/8] ARM: mvebu: Add Device Tree description of xHCI hosts on Armada 38x
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• [PATCH 6/8] ARM: mvebu: Add USB3 support for Armada 38x
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• [PATCH 8/8] ARM: configs: Add usb_xhci_mvebu to multi_v7_defconfig
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• [PATCH 7/8] ARM: configs: Add usb_xhci_mvebu to mvebu_v7_defconfig
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/8] xhci-platform: Add a new controller using xhci: Armada 38x
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Buffer I/O error after s2ram with usb storage persistance
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: problem with resume after s2ram
  • From: Peter Münster <pmlists@xxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: add proper delay for waiting correct PHY status
  • From: Li Jun <b47624@xxxxxxxxxxxxx>
• Re: [PATCH v6 0/3] usb: dwc2/s3c-hsotg: move s3c-hsotg driver into dwc2
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] uvc: update uvc_endpoint_max_bpi to handle USB_SPEED_WIRELESS devices
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: problem with resume after s2ram
  • From: Peter Münster <pmlists@xxxxxxx>
• usb ports shuts down after kernel loads
  • From: Lukáš Doležal <lukas@xxxxxxxxxxx>
• RE: [PATCH v6 0/3] usb: dwc2/s3c-hsotg: move s3c-hsotg driver into dwc2
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: usb audio breaks ohci-pci
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: mv_u3d: Remove usb phy driver for mv_u3d
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] usb: gadget: fsl: Set dma_ops for FSL USB Gadget Device
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 2/2] usb: gadget: Add xilinx axi usb2 device support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] uvc: update uvc_endpoint_max_bpi to handle USB_SPEED_WIRELESS devices
  • From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
• Re: [PATCH] uvc: update uvc_endpoint_max_bpi to handle USB_SPEED_WIRELESS devices
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: gadget: Add xilinx axi usb2 device support
  • From: sundeep subbaraya <sundeep.lkml@xxxxxxxxx>
• Re: problem with resume after s2ram
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] usb: chipidea: add proper delay for waiting correct PHY status
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: gadget: Add xilinx axi usb2 device support
  • From: sundeep subbaraya <sundeep.lkml@xxxxxxxxx>
• [PATCH] usb: musb: dsps: compile suspend/resume only with PM_SLEEP
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: mv_u3d: Remove usb phy driver for mv_u3d
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• Re: [RFC 0/2] Support for Super Speed Link Layer Test
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH] Adds power management support to the atmel ehci driver.
  • From: Michael Welling <mwelling@xxxxxxxx>
• Re: problem with resume after s2ram
  • From: Peter Münster <pmlists@xxxxxxx>
• [PATCH 3/8] usb: dwc3: core: refactor mode initialization to its own function
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 7/8] usb: musb: move usb_phy_generic_{un,}register calls to probe()/remove()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/8] usb: dwc3: gadget: clear stall when disabling endpoint
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/8] usb: gadget: only GPL drivers in the gadget and phy framework
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 5/8] usb: phy: rename usb_nop_xceiv to usb_phy_generic
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 8/8] usb: phy: generic: allow multiples calls to usb_phy_generic_register()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 6/8] usb: phy: rename <linux/usb/usb_phy_gen_xceiv.h> to <linux/usb/usb_phy_generic.h>
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/8] usb: dwc3: core: refactor PHY initialization
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/8] usb: generic cleanup patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: move ZTE CDMA device pid from zte_ev.c back to option.c
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2 2/2] usb: gadget: Add xilinx axi usb2 device support
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: gadget: Add xilinx axi usb2 device support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] uvc: update uvc_endpoint_max_bpi to handle USB_SPEED_WIRELESS devices
  • From: Thomas Pugliese <thomas.pugliese@xxxxxxxxx>
• Re: [PATCH v4 2/4] USB: EHCI: Export the ehci_hub_control function
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: Deadlock v3.10.35 with FTD_SIO usb-serial adapter
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 1/4] USB: OHCI: Export the OHCI hub control and status_data functions
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v4 3/4] USB: ohci-pxa27x: Add support for external vbus regulators
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v4 4/4] ARM: pxa: zeus: Replace OHCI init/exit functions with a regulator
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v4 2/4] USB: EHCI: Export the ehci_hub_control function
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v4 0/4] Allow OHCI/EHCI drivers to override more hub operations
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: USB OTG support on mx27pdk
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v3 3/4] USB: ohci-pxa27x: Add support for external vbus regulators
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: Deadlock v3.10.35 with FTD_SIO usb-serial adapter
  • From: Matteo Fortini <matteo.fortini@xxxxxxxxx>
• Re: [PATCH v2] phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 3/4] USB: ohci-pxa27x: Add support for external vbus regulators
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB OTG support on mx27pdk
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] Allow OHCI/EHCI drivers to override more hub operations
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Adds power management support to the atmel ehci driver.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: Deadlock v3.10.35 with FTD_SIO usb-serial adapter
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V4 5/5] usb-phy: samsung-usb3: Remove older phy-samsung-usb3 driver
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH] usb/serial/ch341: Add parity support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH RFC 3/4] xhci: Tune PHY for the DWC3-Exynos host controller
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• Re: [PATCH V4 5/5] usb-phy: samsung-usb3: Remove older phy-samsung-usb3 driver
  • From: Richard Genoud <richard.genoud@xxxxxxxxx>
• [PATCH v3 4/4] ARM: pxa: zeus: Replace OHCI init/exit functions with a regulator
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v3 3/4] USB: ohci-pxa27x: Add support for external vbus regulators
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v3 1/4] USB: OHCI: Export the OHCI hub control and status_data functions
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v3 2/4] USB: EHCI: Export the ehci_hub_control function
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v3 0/4] Allow OHCI/EHCI drivers to override more hub operations
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: USB OTG support on mx27pdk
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: USB OTG support on mx27pdk
  • From: Alexander Shiyan <shc_work@xxxxxxx>
• Re: USB OTG support on mx27pdk
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] uvc: update uvc_endpoint_max_bpi to handle USB_SPEED_WIRELESS devices
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2] phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: Fwd: Isochronos audio
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb/serial/ch341: Add parity support
  • From: Karl Palsson <karlp@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: gadget: Add xilinx axi usb2 device support
  • From: sundeep subbaraya <sundeep.lkml@xxxxxxxxx>
• Re: Fwd: Isochronos audio
  • From: Russel Hughes <russel.hughes@xxxxxxxxx>
• Re: [PATCH][next] phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] uwb: adds missing error handling
  • From: Daeseok Youn <daeseok.youn@xxxxxxxxx>
• RE: [PATCH v10 00/11] Add USB OTG HNP and SRP support on Chipidea usb driver
  • From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
• Re: [PATCH] usb/serial/ch341: Add parity support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v10 00/11] Add USB OTG HNP and SRP support on Chipidea usb driver
  • From: Li Jun <b47624@xxxxxxxxxxxxx>
• Re: USB OTG support on mx27pdk
  • From: Alexander Shiyan <shc_work@xxxxxxx>
• RE: USB OTG support on mx27pdk
  • From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
• Re: [PATCH RFC] usb: gadget: Add xilinx axi usb2 device support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: phy: mv_u3d: Remove usb phy driver for mv_u3d
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: About the DRD mode implementation of DWC3 driver]
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: USB OTG support on mx27pdk
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• RE: USB OTG support on mx27pdk
  • From: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
• Re: About the DRD mode implementation of DWC3 driver]
  • From: "Wang, Yu" <yu.y.wang@xxxxxxxxxxxxxxx>
• [PATCH] Adds power management support to the atmel ehci driver.
  • From: Michael Welling <mwelling@xxxxxxxx>
• Re: [PATCH] usb/serial/ch341: Add parity support
  • From: Karl P <karlp@xxxxxxxxxxxx>
• Re: [PATCH v2 1/4] USB: OHCI: Export the ohci_hub_control function
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH/RFC 0/3] Allow OHCI drivers to override hub control operations
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: Fix obex in g_nokia.ko causing kernel panic
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Deadlock v3.10.35 with FTD_SIO usb-serial adapter
  • From: Matteo Fortini <matteo.fortini@xxxxxxxxx>
• Re: [PATCH] usb: xhci: Prefer endpoint context dequeue pointer over stopped_trb
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 0/2] USB: ohci-jz4740: Miscellaneous fixes
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] usb: xhci: Prefer endpoint context dequeue pointer over stopped_trb
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Stefani Seibold <stefani@xxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Stefani Seibold <stefani@xxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Stefani Seibold <stefani@xxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Stefani Seibold <stefani@xxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Stefani Seibold <stefani@xxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Stefani Seibold <stefani@xxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Stefani Seibold <stefani@xxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Stefani Seibold <stefani@xxxxxxxxxxx>
• Re: [PATCH] usb: phy: mv_u3d: Remove usb phy driver for mv_u3d
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• Re: [PATCH/RFC 0/3] Allow OHCI drivers to override hub control operations
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] USB: OHCI: Export the ohci_hub_control function
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] USB: EHCI: Export the ehci_hub_control function
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC] usb: gadget: Add xilinx axi usb2 device support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb/serial/ch341: Add parity support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] usb: phy: mv_u3d: Remove usb phy driver for mv_u3d
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/3] USB: musb: add reset hook to platform ops
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH RFC] usb: gadget: Add xilinx axi usb2 device support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 2/4] USB: EHCI: Export the ehci_hub_control function
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: xhci: non-superspeed enumeration failure
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: xhci: non-superspeed enumeration failure (was: Re: medtronic usb productId 0x8001: usbserial support, xhci enumeration)
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v2 2/4] USB: EHCI: Export the ehci_hub_control function
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 4/4] ARM: pxa: zeus: Replace OHCI init/exit functions with a regulator
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 3/4] USB: ohci-pxa27x: Add support for external vbus regulators
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/4] USB: OHCI: Export the ohci_hub_control function
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 0/4] Allow OHCI drivers to override hub control operations
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH/RFC 0/3] Allow OHCI drivers to override hub control operations
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: stefani@xxxxxxxxxxx
• Re: About the DRD mode implementation of DWC3 driver]
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: EHCI: tegra: set txfill_tuning
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb/serial/ch341: Add parity support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [RFC 0/2] Support for Super Speed Link Layer Test
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH RFC 3/4] xhci: Tune PHY for the DWC3-Exynos host controller
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH] usb: xhci: Prefer endpoint context dequeue pointer over stopped_trb
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: cdc-acm: fix broken runtime suspend
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH] usb: phy: mv_u3d: Remove usb phy driver for mv_u3d
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• Re: [PATCH v2 0/7] usb: gadget: gr_udc: OF and ep.maxpacket_limit improvements and fix of GFP_KERNEL in atomic context
  • From: Andreas Larsson <andreas@xxxxxxxxxxx>
• Re: [RFC 0/2] Support for Super Speed Link Layer Test
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: About the DRD mode implementation of DWC3 driver]
  • From: "Wang, Yu" <yu.y.wang@xxxxxxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: stefani@xxxxxxxxxxx
• Re: [PATCH] USB: cdc-acm: fix broken runtime suspend
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [3.15-rc1] a huge number of warnings produced by xhci &
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [RFC 1/4] dwc3: dts: Binding information for an optional property lpm_capable
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH] USB: cdc-acm: fix broken runtime suspend
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [RFC 3/4] xhci: A default implementation for Ux timeout calculation and tier policy check
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH] USB: cdc-acm: fix broken runtime suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH] USB: cdc-acm: fix broken runtime suspend
  • From: Xiao Jin <jin.xiao@xxxxxxxxx>
• Fwd: RE: [RFC PATCH 1/1] usb: udc-core: redo usb_gadget_probe_driver when the udc is ready
  • From: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
• [PATCH] f_rndis: reduce NETTX irq caused by free skb header
  • From: Macpaul Lin <macpaul@xxxxxxxxx>
• Re: [PATCH v10 00/11] Add USB OTG HNP and SRP support on Chipidea usb driver
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH] usb: phy: return an error in usb_get_phy() if try_module_get() fails
  • From: Mathias Krause <minipli@xxxxxxxxxxxxxx>
• Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH] USB: EHCI: tegra: set txfill_tuning
  • From: Alexandre Courbot <gnurou@xxxxxxxxx>
• Re: [PATCH] add alcatel devices PID&&VID
  • From: Lars Melin <larsm17@xxxxxxxxx>
• Re: [PATCH v10 00/11] Add USB OTG HNP and SRP support on Chipidea usb driver
  • From: Li Jun <b47624@xxxxxxxxxxxxx>
• Re:[PATCH v6 2/3] usb: dwc2/s3c-hsotg: move s3c-hsotg into dwc2 directory
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH v6 2/3] usb: dwc2/s3c-hsotg: move s3c-hsotg into dwc2 directory
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH v6 2/3] usb: dwc2/s3c-hsotg: move s3c-hsotg into dwc2 directory
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH v6 2/3] usb: dwc2/s3c-hsotg: move s3c-hsotg into dwc2 directory
  • From: Felipe Balbi <balbi@xxxxxx>
• [RESEND PATCHv5] usb: dwc2: Add function to calculate correct FIFO sizes
  • From: <dinguyen@xxxxxxxxxx>
• [PATCH] USB: EHCI: tegra: set txfill_tuning
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH v6 0/3] usb: dwc2/s3c-hsotg: move s3c-hsotg driver into dwc2
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v6 2/3] usb: dwc2/s3c-hsotg: move s3c-hsotg into dwc2 directory
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v6 3/3] usb: dwc2: move s3c-hsotg data structures
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v6 1/3] usb: dwc2: add defines to support s3c-hsotg driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: problem with resume after s2ram
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [RESEND PATCH v2] documentation: docbook: document process of writing an musb glue layer
  • From: Apelete Seketeli <apelete@xxxxxxxxxxxx>
• Re: [PATCH] usb/serial/ch341: Add parity support
  • From: Kijam López <kijamve@xxxxxxxxx>
• [RESEND PATCH v2] Add documentation on writing an musb glue layer
  • From: Apelete Seketeli <apelete@xxxxxxxxxxxx>
• [PATCH] USB: cdc-acm: fix broken runtime suspend
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH] usb/serial/ch341: Add parity support
  • From: Karl Palsson <karlp@xxxxxxxxxxxx>
• patch: usb/serial/ch341: v2: Add parity support
  • From: Karl Palsson <karlp@xxxxxxxxxxxx>
• Re: [RFC 0/2] Support for Super Speed Link Layer Test
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: fix crash during hotplug of PCI USB controller card
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [RFC 1/4] dwc3: dts: Binding information for an optional property lpm_capable
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [3.15-rc1] a huge number of warnings produced by xhci &
  • From: Christoph Lameter <cl@xxxxxxxxx>
• Re: EHCI hotplug kernel crash in kernel 3.14 and 3.13
  • From: Stefani Seibold <stefani@xxxxxxxxxxx>
• Re: Driver CH341 USB Adapter Serial Port not Works in Linux
  • From: Kijam López <kijamve@xxxxxxxxx>
• Re: [PATCH] add alcatel devices PID&&VID
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• [3.15-rc1] a huge number of warnings produced by xhci &
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Stefani Seibold <stefani@xxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] USB: ohci-jz4740: Miscellaneous fixes
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: stk1160 / ehci-pci 0000:00:0a.0: DMA-API: device driver maps memory fromstack [addr=ffff88003d0b56bf]
  • From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: stefani@xxxxxxxxxxx
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: stefani@xxxxxxxxxxx
• Re: [RFC 3/4] xhci: A default implementation for Ux timeout calculation and tier policy check
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: USB: serial: option: add support for Novatel E371 PCIe card
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: EHCI hotplug kernel crash in kernel 3.14 and 3.13
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• USB: serial: option: add support for Novatel E371 PCIe card
  • From: Alexej Starschenko <starschenko@xxxxxxxxx>
• Re: [PATCH] USB: cp210x: Add 8281 (Nanotec Plug & Drive)
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH/RFC 0/3] Allow OHCI drivers to override hub control operations
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [RFC 1/2] n_tty: fix dropped output characters
  • From: One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx>
• Re: Missing USB XHCI and EHCI reset for kexec
  • From: stefani@xxxxxxxxxxx
• Re: [PATCH v10 00/11] Add USB OTG HNP and SRP support on Chipidea usb driver
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH V4 1/5] phy: Add new Exynos5 USB 3.0 PHY driver
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>