Re: Missing USB XHCI and EHCI reset for kexec

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Dienstag, den 15.04.2014, 15:14 -0400 schrieb Alan Stern:
> On Tue, 15 Apr 2014, Stefani Seibold wrote:
> 
> > > > usbcore: registered new interface driver USB-SATA-storage
> > > > USB SATA Mass Storage support registered.
> > > > usb 1-4: new high-speed USB device number 4 using ehci-pci
> > > > xxxx: ports detected
> > > 
> > > What driver is this?  I've never heard of USB-SATA-storage.
> > > 
> > 
> > This is a special embedded USB SATA driver written by me. It is mostly a
> > fork of the usb-storage driver but handle only one vendor and product ID
> > and does switch on a port bit. On the other side this vendor and product
> > ID is black listed in the regular usb-storage driver. 
> 
> Is it possible that your driver leaves the device in a strange state 
> where it won't initialize properly?
> 

I don't think so, because the driver was not used in this test due a
missing harddisk. But i will do a test tomorrow in the office.

- Stefani



--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux