[PATCH v4 0/4] Allow OHCI/EHCI drivers to override more hub operations

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

The PXA27x OHCI implementation doesn't perform automatic control of port power
supplies for all ports. While the PPS and LSDA bits of the HcRhPortStatus
register are implemented, only a subset of ports have an external power enable
pin controlled by the port status register. Other ports need their power supply
to be controlled manually.

In order to do so I've implemented manual regulator control in the ohci-pxa27x
driver. This requires overriding the default behaviour of the CLEAR_FEATURE
and SET_FEATURE requests for USB_PORT_FEAT_POWER with a custom hub control
operation. In turn this requires calling the currently static ohci_hub_control
function from the ohci-pxa27x driver.

The ohci-at91 and ohci-s3c2410 drivers already implement a similar feature,
and access the ohci_hub_control and ohci_hub_status_data functions by saving
the struct hc_driver hub_control and hub_status_data values to a variables
right after calling ohci_init_driver. This vtable-like implementation can be
optimized by exporting the ohci_hub_control and ohci_hub_status_data functions
and calling them directly. As the ohci-pxa27x driver needs to override hub
control operations as well I've decided to export the functions.

For the sake of completeness I've also exported the ehci_hub_control function
and modified the ehci-tegra driver to call it directly.

As a side note regarding the ohci-at91 driver, the "atmel,vbus-gpio" DT
property should really have referenced a regulator instead of a GPIO. Fixing
this in a backward-compatible way would be messy 

Please note that I haven't been able to test the third and fourth patches due
to lack of hardware. I've however tested a similar implementation for OHCI on
an out of tree PXA270 board.

Changes compared to v3:

- Turn vbus off only after removing the hcd in ohci-pxa27x
- Added Alan Stern's acked-by for patches 1 to 3

Changes compared to v2:

- Export ohci_hub_status_data()
- Call ohci_hub_status_data() directly from ohci-at91 and ohci-s3c2410

Changes compared to v1:

- Export ehci_hub_control()
- Call ehci_hub_control() directly from ehci-tegra
- Call ohci_hub_control() directly from ohci-at91

Laurent Pinchart (4):
  USB: OHCI: Export the OHCI hub control and status_data functions
  USB: EHCI: Export the ehci_hub_control function
  USB: ohci-pxa27x: Add support for external vbus regulators
  ARM: pxa: zeus: Replace OHCI init/exit functions with a regulator

 arch/arm/mach-pxa/zeus.c        | 89 ++++++++++++++++++++++-------------------
 drivers/usb/host/ehci-hub.c     | 12 +-----
 drivers/usb/host/ehci-tegra.c   |  8 +---
 drivers/usb/host/ehci.h         |  3 ++
 drivers/usb/host/ohci-at91.c    | 11 +----
 drivers/usb/host/ohci-hub.c     |  8 ++--
 drivers/usb/host/ohci-pxa27x.c  | 68 +++++++++++++++++++++++++++++++
 drivers/usb/host/ohci-s3c2410.c | 13 ++----
 drivers/usb/host/ohci.h         |  3 ++
 9 files changed, 134 insertions(+), 81 deletions(-)

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux