Hello, The PXA27x OHCI implementation doesn't perform automatic control of port power supplies for all ports. While the PPS and LSDA bits of the HcRhPortStatus register are implemented, only a subset of ports have an external power enable pin controlled by the port status register. Other ports need their power supply to be controlled manually. In order to do so I've implemented manual regulator control in the ohci-pxa27x driver. This requires overriding the default behaviour of the CLEAR_FEATURE and SET_FEATURE requests for USB_PORT_FEAT_POWER with a custom hub control operation. In turn this requires calling the currently static ohci_hub_control function from the ohci-pxa27x driver. The ohci-at91 and ohci-s3c2410 drivers already implement a similar feature, and access the ohci_hub_control and ohci_hub_status_data functions by saving the struct hc_driver hub_control and hub_status_data values to a variables right after calling ohci_init_driver. This vtable-like implementation can be optimized by exporting the ohci_hub_control and ohci_hub_status_data functions and calling them directly. As the ohci-pxa27x driver needs to override hub control operations as well I've decided to export the functions. For the sake of completeness I've also exported the ehci_hub_control function and modified the ehci-tegra driver to call it directly. As a side note regarding the ohci-at91 driver, the "atmel,vbus-gpio" DT property should really have referenced a regulator instead of a GPIO. Fixing this in a backward-compatible way would be messy :-( Please note that I haven't been able to test the third and fourth patches due to lack of hardware. I've however tested a similar implementation for OHCI on an out of tree PXA270 board. Changes compared to v2: - Export ohci_hub_status_data() - Call ohci_hub_status_data() directly from ohci-at91 and ohci-s3c2410 Changes compared to v1: - Export ehci_hub_control() - Call ehci_hub_control() directly from ehci-tegra - Call ohci_hub_control() directly from ohci-at91 Laurent Pinchart (4): USB: OHCI: Export the OHCI hub control and status_data functions USB: EHCI: Export the ehci_hub_control function USB: ohci-pxa27x: Add support for external vbus regulators ARM: pxa: zeus: Replace OHCI init/exit functions with a regulator arch/arm/mach-pxa/zeus.c | 89 ++++++++++++++++++++++------------------- drivers/usb/host/ehci-hub.c | 12 +----- drivers/usb/host/ehci-tegra.c | 8 +--- drivers/usb/host/ehci.h | 3 ++ drivers/usb/host/ohci-at91.c | 11 +---- drivers/usb/host/ohci-hub.c | 8 ++-- drivers/usb/host/ohci-pxa27x.c | 67 +++++++++++++++++++++++++++++++ drivers/usb/host/ohci-s3c2410.c | 13 ++---- drivers/usb/host/ohci.h | 3 ++ 9 files changed, 133 insertions(+), 81 deletions(-) -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
