On Tue, Apr 22, 2014 at 08:45:23AM +0800, Li Jun wrote: > From: Li Jun <b47624@xxxxxxxxxxxxx> > > This patchset adds USB OTG HNP and SRP support on chipidea usb driver, > existing OTG port role swtich function by ID pin status kept unchanged, > based on that, if select CONFIG_USB_OTG_FSM, OTG HNP and SRP will be > supported. > > Reference to: > "On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification July 27, 2012 > Revision 2.0 version 1.1a" > > Change since v11: > - Add one more patch to export symbol otg_statemachine to resolve symbol > undefined error when ci hdrc driver build as module. > > Change since v10: > - Use queue work to start fsm instead of directly call to fsm work in > ci_hdrc_otg_fsm_start() for patch 07/11. > > Changes since v9: > - Move xxx_fsm_start to be after request irq since xxx_fsm_work need call to > disable_irq_nosync(ci->irq). > - Add fsm handling in xxx_fsm_work for regsiter gadget driver with vbus on, instead > of rely on B_SE0_SRP timer(which is not directly linked to this case and need wait > 1s). > - Add comments on a_idle to a_wait_vrise due to ID change, which is out of OTG spec > but make sense for user experience. > - Remove blank line introduced in v9. > > Changes since v8: > - fsm start is the only entry point to start fsm and cover all role start/stop, > which only call to ci_otg_fsm_work(). Move otg fsm start before request_irq > for fsm mode, ci_role_start only for non fsm mode. > - use queue work to handle further state changes in ci_otg_fsm_work(). > - Let otg fsm handle all after ci->driver is set in ci_udc_start. > - Enable BSV irq when power up with ID is 1. > > Changes since v7: > - move role start special handling in ci_hdrc_otg_fsm_start() > this can make start host/gadget clean. > - move ci_hdrc_otg_fsm_init() into ci_hdrc_otg_init() > - Remain ci_role_start() in ci_hdrc_probe because host role start > need be done before request_irq. > - Revert the otg->host set change since fsm init will be fixed before > role start. > - Remove fsm->protocol init in ci_hdrc_otg_fsm_init(). > > Li Jun (12): > usb: phy: otg-fsm: export symbol of otg_statemachine > usb: chipidea: usb OTG fsm initialization. > usb: chipidea: host: vbus control change for OTG HNP. > usb: chipidea: host: init otg port number. > usb: chipidea: udc: driver update for OTG HNP. > usb: chipidea: add OTG fsm operation functions implemenation. > usb: chipidea: OTG fsm timers initialization. > usb: chipidea: OTG HNP and SRP fsm implementation. > usb: chipidea: add sys inputs for OTG fsm input. > usb: chipidea: debug: add debug file for OTG variables > Documentation: ABI: usb: sysfs Description for chipidea USB OTG HNP > and SRP > Documentation: usb: add chipidea.txt for how to demo usb OTG HNP and > SRP > > .../ABI/testing/sysfs-platform-chipidea-usb-otg | 56 ++ > Documentation/usb/chipidea.txt | 71 ++ > drivers/usb/chipidea/Makefile | 1 + > drivers/usb/chipidea/bits.h | 10 + > drivers/usb/chipidea/ci.h | 19 + > drivers/usb/chipidea/core.c | 24 +- > drivers/usb/chipidea/debug.c | 84 ++ > drivers/usb/chipidea/host.c | 21 +- > drivers/usb/chipidea/otg.c | 15 +- > drivers/usb/chipidea/otg_fsm.c | 865 ++++++++++++++++++++ > drivers/usb/chipidea/otg_fsm.h | 129 +++ > drivers/usb/chipidea/udc.c | 19 +- > drivers/usb/phy/phy-fsm-usb.c | 1 + > 13 files changed, 1301 insertions(+), 14 deletions(-) > create mode 100644 Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg > create mode 100644 Documentation/usb/chipidea.txt > create mode 100644 drivers/usb/chipidea/otg_fsm.c > create mode 100644 drivers/usb/chipidea/otg_fsm.h > > -- > 1.7.9.5 > I find many of your subjects has "." at last, it doesn't need, I fix them this time. Thanks for your work for otg fsm for chipidea, I will send them to Greg. -- Best Regards, Peter Chen -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
