On Mon, Apr 21, 2014 at 9:14 AM, Felipe Balbi <balbi@xxxxxx> wrote: > Hi, > > On Fri, Apr 04, 2014 at 03:18:11PM -0700, Tim Bird wrote: >> Select the secondary PHY using the TCSR register, if phy-num=1 >> in the DTS (or phy_number is set in the platform data). The >> SOC has 2 PHYs which can be used with the OTG port, and this >> code allows configuring the correct one. >> >> Note: This resolves the problem I was seeing where I couldn't >> get the USB driver working at all on a dragonboard, from cold >> boot. This patch depends on patch 5/14 from Ivan's msm USB >> patch set. It does not use DT for the register address, as >> there's no evidence that this address changes between SoC >> versions. >> >> Signed-off-by: Tim Bird <tim.bird@xxxxxxxxxxxxxx> > > doesn't apply: > > checking file drivers/usb/phy/phy-msm-usb.c > Hunk #1 succeeded at 1412 with fuzz 2 (offset -106 lines). > Hunk #2 FAILED at 1581. > 1 out of 2 hunks FAILED > checking file include/linux/usb/msm_hsusb_hw.h Sorry about that. Did you apply this on top of Ivan's USB patch set? That's a pre-requisite. I've communicated privately with Ivan, and he's preparing an updated patch set which incorporates this fix and a few other things. This should be showing up soon-ish. -- Tim Senior Software Engineer, Sony Mobile Architecture Group Chair, CE Workgroup, Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
