From: Li Jun <B47624@xxxxxxxxxxxxx> Leave vbus on/off hanlded by OTG fsm if in OTG mode. Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx> Signed-off-by: Li Jun <b47624@xxxxxxxxxxxxx> --- drivers/usb/chipidea/host.c | 10 +++++++--- 1 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index a8ac6c1..ffb4168 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -67,7 +67,11 @@ static int host_start(struct ci_hdrc *ci) ehci->has_tdi_phy_lpm = ci->hw_bank.lpm; ehci->imx28_write_fix = ci->imx28_write_fix; - if (ci->platdata->reg_vbus) { + /* + * vbus is always on if host is not in OTG FSM mode, + * otherwise should be controlled by OTG FSM + */ + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) { ret = regulator_enable(ci->platdata->reg_vbus); if (ret) { dev_err(ci->dev, @@ -89,7 +93,7 @@ static int host_start(struct ci_hdrc *ci) return ret; disable_reg: - if (ci->platdata->reg_vbus) + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) regulator_disable(ci->platdata->reg_vbus); put_hcd: @@ -105,7 +109,7 @@ static void host_stop(struct ci_hdrc *ci) if (hcd) { usb_remove_hcd(hcd); usb_put_hcd(hcd); - if (ci->platdata->reg_vbus) + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) regulator_disable(ci->platdata->reg_vbus); } } -- 1.7.8 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html