Linux Serial

• Thread Index

• Re: [PATCH v1 1/1] serial: 8250: Use cached port name directly in messages
  • From: Andy Shevchenko
• [PATCH v2] serial: 8250: Use cached port name directly in messages
  • From: Andy Shevchenko
• [PATCH] serial: core: stop passing NULL in uart_resume_port
  • From: Chen Hu
• Re: [PATCH v5 06/11] soc: mediatek: add new flow for mtcmos power.
  • From: Owen Chen
• Lessons learnt from using serdev with SC16IS7XX
  • From: Michael Allwright
• Re: [PATCH v1 1/1] serial: 8250: Use cached port name directly in messages
  • From: Greg Kroah-Hartman
• Re: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Geert Uytterhoeven
• RE: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Chris Brandt
• Re: [PATCHv5 4/4] dt-bindings: serial: Add binding for uartlite
  • From: Rob Herring
• [PATCH] serial: 8250_exar: Read INT0 from slave device, too
  • From: Aaron Sierra
• Re: [PATCH v1 1/1] serial: 8250: Use cached port name directly in messages
  • From: Andy Shevchenko
• Re: [PATCH v1 1/3] serial: 8250_exar: Move the Exar bits from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH v1 1/3] serial: 8250_exar: Move the Exar bits from 8250_port
  • From: Aaron Sierra
• RE: [PATCH v2] serial: fsl_lpuart: Remove the alias node dependence
  • From: Vabhav Sharma
• Re: [PATCH v2] serial: fsl_lpuart: Remove the alias node dependence
  • From: Greg KH
• Re: [PATCH v1 1/3] serial: 8250_exar: Move the Exar bits from 8250_port
  • From: Andy Shevchenko
• Re: serdev vs. sc16is7x2 - two tty ports per of_node
  • From: Rob Herring
• Re: [PATCH v1 1/3] serial: 8250_exar: Move the Exar bits from 8250_port
  • From: Aaron Sierra
• Re: [PATCH] serial: 8250_ingenic: Add support for the JZ4725B SoC
  • From: Rob Herring
• Re: [PATCH v1 1/3] serial: 8250_exar: Move the Exar bits from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH v1 1/3] serial: 8250_exar: Move the Exar bits from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH v1 0/2] RFT: serial: 8250_exar: Partially move quirks from 8250_port
  • From: Andy Shevchenko
• [PATCH v1] serial: 8250_exar: Drop unused variable in pci_xr17v35x_setup()
  • From: Andy Shevchenko
• RE: [PATCH v2] serial: fsl_lpuart: Remove the alias node dependence
  • From: Vabhav Sharma
• [PATCH v2] serial: fsl_lpuart: Remove the alias node dependence
  • From: Vabhav
• Re: [PATCH v2] serial: fsl_lpuart: Remove the alias node dependence
  • From: Greg KH
• [PATCH v2] serial: fsl_lpuart: Remove the alias node dependence
  • From: Vabhav
• Re: [PATCH v2] serial: sh-sci: byte allocated register support
  • From: Geert Uytterhoeven
• Re: [PATCH v1 0/2] RFT: serial: 8250_exar: Partially move quirks from 8250_port
  • From: Sudip Mukherjee
• Re: [PATCH v3 0/4] Add basic support for Mediatek MT8183 SoC
  • From: Matthias Brugger
• serdev vs. sc16is7x2 - two tty ports per of_node
  • From: Andreas Färber
• Re: [PATCHv4 1/4] tty: serial: uartlite: Add structure for private data
  • From: Shubhrajyoti Datta
• [PATCHv5 4/4] dt-bindings: serial: Add binding for uartlite
  • From: shubhrajyoti.datta
• [PATCHv5 3/4] tty: serial: uartlite: Add support for suspend and resume
  • From: shubhrajyoti.datta
• [PATCHv5 2/4] tty: serial: uartlite: Add clock adaptation
  • From: shubhrajyoti.datta
• [PATCHv5 1/4] tty: serial: uartlite: Add structure for private data
  • From: shubhrajyoti.datta
• [PATCHv5 0/4] tty: serial: uartlite: Driver updates
  • From: shubhrajyoti.datta
• Re: [PATCH v3 0/4] Add basic support for Mediatek MT8183 SoC
  • From: Erin Lo
• Re: [PATCH v1 1/1] serial: 8250: Use cached port name directly in messages
  • From: Greg Kroah-Hartman
• Re: [PATCHv4 1/4] tty: serial: uartlite: Add structure for private data
  • From: Greg KH
• Re: [PATCH] serial: 8250_ingenic: Add support for the JZ4725B SoC
  • From: Paul Cercueil
• Re: [PATCH v5 04/11] soc: mediatek: add MT6765 scpsys support
  • From: Rob Herring
• Re: [PATCH v5 03/11] dt-bindings: mediatek: add MT6765 power dt-bindings
  • From: Rob Herring
• Re: [PATCH v5 02/11] dt-bindings: mediatek: Add smi dts binding for Mediatek MT6765 SoC
  • From: Rob Herring
• Re: [PATCH v5 01/11] dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC
  • From: Rob Herring
• Re: [PATCH] serial: 8250_ingenic: Add support for the JZ4725B SoC
  • From: Rob Herring
• [PATCH] serial: sh-sci: Document that serial aliases became optional
  • From: Geert Uytterhoeven
• [PATCH] serial: sh-sci: Drop superfluous assignment in sci_request_dma()
  • From: Geert Uytterhoeven
• Re: [PATCH v3 0/4] Add basic support for Mediatek MT8183 SoC
  • From: Matthias Brugger
• Re: [PATCH v3 0/4] Add basic support for Mediatek MT8183 SoC
  • From: Erin Lo
• Re: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] serial: sh-sci: Add support for R7S9210
  • From: Geert Uytterhoeven
• Re: [PATCH v3 5/9] Bluetooth: btrtl: Add support for a config filename postfix
  • From: Hans de Goede
• RE: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Chris Brandt
• Re: [PATCH 1/3] tty/serial_core: add ISO7816 infrastructure
  • From: Alan Cox
• Re: [PATCH v2 0/2] add ISO7816 support
  • From: Ludovic Desroches
• Re: [PATCH v2 0/2] add ISO7816 support
  • From: Neil Armstrong
• [PATCH v2 2/2] tty/serial: atmel: add ISO7816 support
  • From: Ludovic Desroches
• [PATCH v2 1/2] tty/serial_core: add ISO7816 infrastructure
  • From: Ludovic Desroches
• [PATCH v2 0/2] add ISO7816 support
  • From: Ludovic Desroches
• Re: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH v5 09/11] clk: mediatek: add new clkmux register API
  • From: Sean Wang
• Re: [PATCH v1 0/3] console, serial8250: Disable PM and DMA ops
  • From: Tony Lindgren
• Re: [PATCH v1 0/3] console, serial8250: Disable PM and DMA ops
  • From: Tony Lindgren
• Re: [PATCH v1 1/3] serial: 8250_exar: Move the Exar bits from 8250_port
  • From: Aaron Sierra
• RE: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Chris Brandt
• RE: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Chris Brandt
• Re: [PATCH v1 1/3] serial: 8250_exar: Move the Exar bits from 8250_port
  • From: Aaron Sierra
• Re: [PATCH v1 1/3] serial: 8250_exar: Move the Exar bits from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH v1 1/3] serial: 8250_exar: Move the Exar bits from 8250_port
  • From: Aaron Sierra
• [PATCH v1 1/1] serial: 8250: Use cached port name directly in messages
  • From: Andy Shevchenko
• [PATCH v1 2/2] serial: 8250_exar: Describe all members in struct exar8250_board
  • From: Andy Shevchenko
• [PATCH v1 1/2] serial: 8250_exar: Remove useless has_slave member
  • From: Andy Shevchenko
• Re: [PATCH v1 0/3] console, serial8250: Disable PM and DMA ops
  • From: Andy Shevchenko
• Re: [PATCH v1 0/3] console, serial8250: Disable PM and DMA ops
  • From: Andy Shevchenko
• Re: [PATCH v5 06/11] soc: mediatek: add new flow for mtcmos power.
  • From: Matthias Brugger
• Re: [PATCH v1 1/3] serial: 8250_exar: Move the Exar bits from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH v5 04/11] soc: mediatek: add MT6765 scpsys support
  • From: Mars Cheng
• [PATCHv4 4/4] dt-bindings: serial: Add binding for uartlite
  • From: Shubhrajyoti Datta
• RE: [PATCHv3 4/4] dt-bindings: serial: Add binding for uartlite
  • From: Shubhrajyoti Datta
• [PATCHv4 2/4] tty: serial: uartlite: Add clock adaptation
  • From: Shubhrajyoti Datta
• [PATCHv3 4/4] dt-bindings: serial: Add binding for uartlite
  • From: Shubhrajyoti Datta
• [PATCHv4 3/4] tty: serial: uartlite: Add support for suspend and resume
  • From: Shubhrajyoti Datta
• [PATCHv4 1/4] tty: serial: uartlite: Add structure for private data
  • From: Shubhrajyoti Datta
• Re: [PATCH v5 05/11] clk: mediatek: add mt6765 clock IDs
  • From: Mars Cheng
• Re: [PATCH v5 06/11] soc: mediatek: add new flow for mtcmos power.
  • From: kbuild test robot
• Re: [PATCH v5 10/11] clk: mediatek: Add MT6765 clock support
  • From: kbuild test robot
• [RFC PATCH] clk: mediatek: cksys_base can be static
  • From: kbuild test robot
• [RFC PATCH] soc: mediatek: bus_ctrl_set_release() can be static
  • From: kbuild test robot
• Re: [PATCH v5 06/11] soc: mediatek: add new flow for mtcmos power.
  • From: kbuild test robot
• Re: [PATCH v5 10/11] clk: mediatek: Add MT6765 clock support
  • From: kbuild test robot
• Re: [PATCH v5 06/11] soc: mediatek: add new flow for mtcmos power.
  • From: kbuild test robot
• RE: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Chris Brandt
• Re: [PATCH v5 04/11] soc: mediatek: add MT6765 scpsys support
  • From: Sean Wang
• Re: [PATCH] serial: sh-sci: Fix use-after-free on subsequent port startup
  • From: Simon Horman
• Re: [PATCH v2 2/2] serial: 8250_dw: Add compatible string for Renesas RZ/N1 UART
  • From: Simon Horman
• Re: [PATCH v2 1/2] dt: serial: Add Renesas RZ/N1 binding documentation
  • From: Simon Horman
• Re: [PATCH] serial: sh-sci: Fix use-after-free on subsequent port startup
  • From: Ulrich Hecht
• Re: [PATCH v5 05/11] clk: mediatek: add mt6765 clock IDs
  • From: Matthias Brugger
• Re: [PATCH v2 2/3] serial: sh-sci: Stop TX DMA workqueue during port shutdown
  • From: Simon Horman
• [PATCH] serial: sh-sci: Fix use-after-free on subsequent port startup
  • From: Geert Uytterhoeven
• [PATCH v5 02/11] dt-bindings: mediatek: Add smi dts binding for Mediatek MT6765 SoC
  • From: Mars Cheng
• [PATCH v5 01/11] dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC
  • From: Mars Cheng
• [PATCH v5 04/11] soc: mediatek: add MT6765 scpsys support
  • From: Mars Cheng
• [PATCH v5 07/11] soc: mediatek: add MT6765 subdomain support
  • From: Mars Cheng
• [PATCH v5 03/11] dt-bindings: mediatek: add MT6765 power dt-bindings
  • From: Mars Cheng
• [PATCH v5 0/11] Add basic SoC support for mt6765
  • From: Mars Cheng
• [PATCH v5 08/11] clk: mediatek: fix pll setting
  • From: Mars Cheng
• [PATCH v5 05/11] clk: mediatek: add mt6765 clock IDs
  • From: Mars Cheng
• [PATCH v5 10/11] clk: mediatek: Add MT6765 clock support
  • From: Mars Cheng
• [PATCH v5 09/11] clk: mediatek: add new clkmux register API
  • From: Mars Cheng
• [PATCH v5 06/11] soc: mediatek: add new flow for mtcmos power.
  • From: Mars Cheng
• [PATCH v5 11/11] arm64: dts: mediatek: add mt6765 support
  • From: Mars Cheng
• Re: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH v1 1/3] serial: 8250_exar: Move the Exar bits from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH v1 1/3] serial: 8250_exar: Move the Exar bits from 8250_port
  • From: Aaron Sierra
• Re: [PATCHv2 5/5] dt-bindings: serial: Add clock to the binding for uartlite
  • From: Rob Herring
• Re: [PATCH v2 1/2] dt: serial: Add Renesas RZ/N1 binding documentation
  • From: Rob Herring
• Re: [PATCHv3 4/4] dt-bindings: serial: Add binding for uartlite
  • From: Rob Herring
• Re: [PATCH v1 0/2] RFT: serial: 8250_exar: Partially move quirks from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH v1 0/2] RFT: serial: 8250_exar: Partially move quirks from 8250_port
  • From: Sudip Mukherjee
• [PATCH v1 3/3] serial: 8250_exar: Describe all members in struct exar8250_board
  • From: Andy Shevchenko
• [PATCH v1 1/3] serial: 8250_exar: Move the Exar bits from 8250_port
  • From: Andy Shevchenko
• [PATCH v1 2/3] serial: 8250_exar: Move fractional divisor support from 8250_port
  • From: Andy Shevchenko
• [PATCH v1 0/2] RFT: serial: 8250_exar: Partially move quirks from 8250_port
  • From: Andy Shevchenko
• Re: [PATCH v5 2/7] serdev: add dev_pm_domain_attach|detach()
  • From: Greg Kroah-Hartman
• Re: [PATCH v3 0/4] Add basic support for Mediatek MT8183 SoC
  • From: Matthias Brugger
• [PATCHv3 2/4] tty: serial: uartlite: Add clock adaptation
  • From: shubhrajyoti.datta
• [PATCHv3 1/4] tty: serial: uartlite: Add structure for private data
  • From: shubhrajyoti.datta
• [PATCHv3 4/4] dt-bindings: serial: Add binding for uartlite
  • From: shubhrajyoti.datta
• [PATCHv3 3/4] tty: serial: uartlite: Add support for suspend and resume
  • From: shubhrajyoti.datta
• Re: [PATCH v5 2/7] serdev: add dev_pm_domain_attach|detach()
  • From: Johan Hovold
• Re: [PATCH v5 2/7] serdev: add dev_pm_domain_attach|detach()
  • From: Marcel Holtmann
• Re: [PATCH v3 4/9] Bluetooth: btrtl: add support for the RTL8723BS and RTL8723DS chips
  • From: Marcel Holtmann
• Re: [PATCH v3 5/9] Bluetooth: btrtl: Add support for a config filename postfix
  • From: Marcel Holtmann
• Re: [PATCH v3 2/9] Bluetooth: btrtl: split the device initialization into smaller parts
  • From: Marcel Holtmann
• [PATCH] tty: serial: qcom_geni_serial: Add support for flow control
  • From: Karthikeyan Ramasubramanian
• [PATCH v11 0/6] Driver for at91 usart in spi mode
  • From: Radu Pirea
• [PATCH v11 6/6] tty/serial: atmel: change the driver to work under at91-usart mfd
  • From: Radu Pirea
• [PATCH v11 5/6] spi: at91-usart: add driver for at91-usart as spi
  • From: Radu Pirea
• [PATCH v11 4/6] MAINTAINERS: add at91 usart spi driver
  • From: Radu Pirea
• [PATCH v11 3/6] mfd: at91-usart: added mfd driver for usart
  • From: Radu Pirea
• [PATCH v11 2/6] dt-bindings: add binding for atmel-usart in SPI mode
  • From: Radu Pirea
• [PATCH v11 1/6] MAINTAINERS: add at91 usart mfd driver
  • From: Radu Pirea
• Re: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Geert Uytterhoeven
• [PATCH] serial: 8250: of: Defer probe on missing IRQ
  • From: Alexander Sverdlin
• [PATCH] serial: 8250: of: Correct of_platform_serial_setup() error handling
  • From: Alexander Sverdlin
• [PATCH] serial: 8250_ingenic: Add support for the JZ4725B SoC
  • From: Paul Cercueil
• Re: [PATCH v4] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Tycho Andersen
• [patch v27 4/4] Documentation: jtag: Add ABI documentation
  • From: Oleksandr Shamray
• [patch v27 3/4] Documentation: jtag: Add bindings for Aspeed SoC 24xx and 25xx families JTAG master driver
  • From: Oleksandr Shamray
• [patch v27 1/4] drivers: jtag: Add JTAG core driver
  • From: Oleksandr Shamray
• [patch v27 2/4] drivers: jtag: Add Aspeed SoC 24xx and 25xx families JTAG master driver
  • From: Oleksandr Shamray
• [patch v27 0/4] JTAG driver introduction
  • From: Oleksandr Shamray
• [PATCHv2 4/4] dt-bindings: serial: Add binding for uartlite
  • From: shubhrajyoti.datta
• [PATCHv2 3/4] tty: serial: uartlite: Add support for suspend and resume
  • From: shubhrajyoti.datta
• [PATCHv2 2/4] tty: serial: uartlite: Add clock adaptation
  • From: shubhrajyoti.datta
• [PATCHv2 1/4] tty: serial: uartlite: Add structure for private data
  • From: shubhrajyoti.datta
• [PATCHv2 3/5] tty: serial: uartlite: Add clock adaptation
  • From: shubhrajyoti.datta
• [PATCHv2 1/5] dt-bindings: serial: Add binding for uartlite
  • From: shubhrajyoti.datta
• [PATCHv2 2/5] tty: serial: uartlite: Add structure for private data
  • From: shubhrajyoti.datta
• [PATCHv2 5/5] dt-bindings: serial: Add clock to the binding for uartlite
  • From: shubhrajyoti.datta
• [PATCHv2 4/5] tty: serial: uartlite: Add support for suspend and resume
  • From: shubhrajyoti.datta
• Re: [PATCH v10 5/6] spi: at91-usart: add driver for at91-usart as spi
  • From: Alexandre Belloni
• Re: [PATCH v10 5/6] spi: at91-usart: add driver for at91-usart as spi
  • From: Radu Pirea
• [PATCH v2 2/2] serial: 8250_dw: Add compatible string for Renesas RZ/N1 UART
  • From: Phil Edworthy
• [PATCH v2 1/2] dt: serial: Add Renesas RZ/N1 binding documentation
  • From: Phil Edworthy
• [PATCH v2 0/2] dt: serial: Add Renesas RZ/N1 binding documentation
  • From: Phil Edworthy
• Re: [PATCH v4] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Greg Kroah-Hartman
• [PATCH] tty: serial: jsm: remove redundant pointer ch
  • From: Colin King
• Re: [PATCH 1/3] tty/serial_core: add ISO7816 infrastructure
  • From: Greg KH
• Re: [PATCH 1/3] tty/serial_core: add ISO7816 infrastructure
  • From: Ludovic Desroches
• Re: [PATCH v2 2/3] serial: sh-sci: Stop TX DMA workqueue during port shutdown
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] tty/serial_core: add ISO7816 infrastructure
  • From: Ludovic Desroches
• Re: [PATCH 1/2] dt: serial: Add Renesas RZ/N1 binding documentation
  • From: Simon Horman
• Re: [PATCH v2 2/3] serial: sh-sci: Stop TX DMA workqueue during port shutdown
  • From: Simon Horman
• Re: [PATCH v10 0/6] Driver for at91 usart in spi mode
  • From: Lee Jones
• Re: [PATCH v4] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Tycho Andersen
• Re: [PATCH v4] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Greg Kroah-Hartman
• Re: [PATCH v4] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Tycho Andersen
• Re: [PATCH v4] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Greg Kroah-Hartman
• Re: [PATCH 3/3] tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode
  • From: Ludovic Desroches
• Re: [PATCH v4] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Tycho Andersen
• Re: [PATCH v4] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Greg Kroah-Hartman
• Re: [PATCH v4] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Greg Kroah-Hartman
• Re: [PATCH 1/3] tty/serial_core: add ISO7816 infrastructure
  • From: Greg KH
• Re: [PATCH 2/3] tty/serial: atmel: add ISO7816 support
  • From: Greg KH
• Re: [PATCH 3/3] tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode
  • From: Greg KH
• Re: [PATCH 3/3] tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode
  • From: Greg KH
• Re: [PATCH 1/3] tty/serial_core: add ISO7816 infrastructure
  • From: Greg KH
• Re: [PATCH v4] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Tycho Andersen
• Re: [PATCH 2/2] serial: 8250_dw: Add compatible string for Renesas RZ/N1 UART
  • From: Geert Uytterhoeven
• RE: [PATCH 1/2] dt: serial: Add Renesas RZ/N1 binding documentation
  • From: Phil Edworthy
• RE: [PATCH 2/2] serial: 8250_dw: Add compatible string for Renesas RZ/N1 UART
  • From: Phil Edworthy
• Re: [PATCH v4] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Andy Shevchenko
• Re: [PATCH 0/2] serial: sh-sci: Use pm_runtime_get_sync()/put()
  • From: Wolfram Sang
• [PATCH v6 2/3] serial: 8250: export serial8250_do_set_divisor()
  • From: Jisheng Zhang
• [PATCH v6 3/3] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• [PATCH v6 1/3] serial: 8250: introduce get_divisor() and set_divisor() hook
  • From: Jisheng Zhang
• [PATCH v6 0/3] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• Re: [PATCH 1/3] tty/serial_core: add ISO7816 infrastructure
  • From: kbuild test robot
• Re: [PATCH v4 1/1] arm64: dts: mediatek: add mt6765 support
  • From: Mars Cheng
• Re: [PATCH 1/3] tty/serial_core: add ISO7816 infrastructure
  • From: kbuild test robot
• Re: [PATCH v4] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Tycho Andersen
• Re: [PATCH v4] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Serge E. Hallyn
• Re: [PATCH v4] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Serge E. Hallyn
• [PATCH v4] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Tycho Andersen
• Re: [PATCH v2 1/3] serial: sh-sci: Postpone DMA release when falling back to PIO
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/3] serial: sh-sci: Stop TX DMA workqueue during port shutdown
  • From: Geert Uytterhoeven
• RE: [PATCH 2/2] serial: 8250_dw: Add compatible string for Renesas RZ/N1 UART
  • From: Phil Edworthy
• Re: [PATCH v2 3/3] serial: sh-sci: Stop using deprecated dmaengine_terminate_all()
  • From: Simon Horman
• Re: [PATCH v2 2/3] serial: sh-sci: Stop TX DMA workqueue during port shutdown
  • From: Simon Horman
• [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Chris Brandt
• [PATCH 1/2] serial: sh-sci: Add support for R7S9210
  • From: Chris Brandt
• [PATCH 0/2] serial: sh-sci: Add support for RZ/A2
  • From: Chris Brandt
• Re: [PATCH v2 1/3] serial: sh-sci: Postpone DMA release when falling back to PIO
  • From: Simon Horman
• Re: [PATCH v4 3/3] serial: 8250_dw: add fractional divisor support
  • From: Andy Shevchenko
• [PATCH 3/3] tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode
  • From: Ludovic Desroches
• [PATCH 3/3] tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode
  • From: Ludovic Desroches
• [PATCH 1/3] tty/serial_core: add ISO7816 infrastructure
  • From: Ludovic Desroches
• [PATCH 2/3] tty/serial: atmel: add ISO7816 support
  • From: Ludovic Desroches
• [PATCH 0/3] add ISO7816 support
  • From: Ludovic Desroches
• Re: [PATCH 2/2] serial: 8250_dw: Add compatible string for Renesas RZ/N1 UART
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] dt: serial: Add Renesas RZ/N1 binding documentation
  • From: Geert Uytterhoeven
• [PATCH 2/2] serial: 8250_dw: Add compatible string for Renesas RZ/N1 UART
  • From: Phil Edworthy
• [PATCH 1/2] dt: serial: Add Renesas RZ/N1 binding documentation
  • From: Phil Edworthy
• [PATCH 0/2] dt: serial: Add Renesas RZ/N1 binding documentation
  • From: Phil Edworthy
• Re: [PATCH v5 3/3] serial: 8250_dw: add fractional divisor support
  • From: Andy Shevchenko
• Re: [PATCH v10 0/6] Driver for at91 usart in spi mode
  • From: Nicolas Ferre
• [PATCH v5 3/3] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• Re: [PATCH v4 3/3] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• Re: [PATCH v3 0/9] Bluetooth: Add RTL8723BS support
  • From: Ian W MORRISON
• Re: [PATCH v10 5/6] spi: at91-usart: add driver for at91-usart as spi
  • From: Mark Brown
• Re: [PATCH v4 3/3] serial: 8250_dw: add fractional divisor support
  • From: Andy Shevchenko
• Re: [PATCH v3 3/8] mailbox: Add transmit done by blocking option
  • From: Thierry Reding
• Re: [PATCH v4 2/3] serial: 8250: export serial8250_do_set_divisor()
  • From: Andy Shevchenko
• Re: [PATCH v3 7/9] Bluetooth: hci_h5: Add vendor setup, open, and close callbacks
  • From: kbuild test robot
• Re: [PATCH v4 1/1] arm64: dts: mediatek: add mt6765 support
  • From: Matthias Brugger
• [PATCH v3 9/9] Bluetooth: hci_h5: Add support for enable and device-wake GPIOs
  • From: Hans de Goede
• [PATCH v3 7/9] Bluetooth: hci_h5: Add vendor setup, open, and close callbacks
  • From: Hans de Goede
• [PATCH v3 4/9] Bluetooth: btrtl: add support for the RTL8723BS and RTL8723DS chips
  • From: Hans de Goede
• [PATCH v3 3/9] Bluetooth: btrtl: add support for retrieving the UART settings
  • From: Hans de Goede
• [PATCH v3 8/9] Bluetooth: hci_h5: Add support for the RTL8723BS
  • From: Hans de Goede
• [PATCH v3 6/9] Bluetooth: hci_h5: Add support for serdev enumerated devices
  • From: Hans de Goede
• [PATCH v3 5/9] Bluetooth: btrtl: Add support for a config filename postfix
  • From: Hans de Goede
• [PATCH v3 2/9] Bluetooth: btrtl: split the device initialization into smaller parts
  • From: Hans de Goede
• [PATCH v3 1/9] Bluetooth: btrtl: add MODULE_FIRMWARE declarations
  • From: Hans de Goede
• [PATCH v3 0/9] Bluetooth: Add RTL8723BS support
  • From: Hans de Goede
• [PATCH v4 3/3] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• [PATCH v4 2/3] serial: 8250: export serial8250_do_set_divisor()
  • From: Jisheng Zhang
• [PATCH v4 1/3] serial: 8250: introduce get_divisor() and set_divisor() hook
  • From: Jisheng Zhang
• [PATCH v4 0/3] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• Re: [PATCH v3 3/3] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• Re: [PATCH v4 1/1] arm64: dts: mediatek: add mt6765 support
  • From: Mars Cheng
• Re: [PATCH v4 1/1] arm64: dts: mediatek: add mt6765 support
  • From: Marc Zyngier
• [PATCH v5 2/7] serdev: add dev_pm_domain_attach|detach()
  • From: sean.wang
• Re: [PATCH 3/4] doc: uartlite: Add binding for the driver
  • From: Rob Herring
• Re: [PATCH 3/4] doc: uartlite: Add binding for the driver
  • From: Maarten Brock
• Re: [PATCH v4 1/1] arm64: dts: mediatek: add mt6765 support
  • From: Matthias Brugger
• Re: [PATCH v3 3/3] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• [PATCH v3 3/3] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• [PATCH v3 2/3] serial: 8250: export serial8250_do_set_divisor()
  • From: Jisheng Zhang
• Re: serial: 8250: introduce get_divisor() and set_divisor() hook
  • From: Jisheng Zhang
• [PATCH v3 1/3] serial: 8250: introduce get_divisor() and set_divisor() hook
  • From: Jisheng Zhang
• serial: 8250: introduce get_divisor() and set_divisor() hook
  • From: Jisheng Zhang
• [PATCH v3 0/3] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• Re: [PATCH v4 1/1] arm64: dts: mediatek: add mt6765 support
  • From: Marc Zyngier
• Re: [PATCH v2 3/3] serial: 8250_dw: add fractional divisor support
  • From: Andy Shevchenko
• Re: [PATCH v2 3/3] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• [PATCH v4 1/1] arm64: dts: mediatek: add mt6765 support
  • From: Mars Cheng
• [PATCH v4 0/1] Add basic SoC support for mt6765
  • From: Mars Cheng
• Re: [PATCH v3] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Tycho Andersen
• Re: [PATCH v3] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Andy Shevchenko
• Re: [PATCH v3] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Tycho Andersen
• Re: [PATCH v2 3/3] serial: 8250_dw: add fractional divisor support
  • From: Andy Shevchenko
• Re: [PATCH v2 3/3] serial: 8250_dw: add fractional divisor support
  • From: Andy Shevchenko
• Re: [PATCH v3] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Andy Shevchenko
• [PATCH v3] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Tycho Andersen
• [PATCH v1] serial: 8250_dw: Introduce IO accessors to extended registers
  • From: Andy Shevchenko
• Re: [PATCH v2] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Greg Kroah-Hartman
• [PATCH v2] serial: sh-sci: Stop RX FIFO timer during port shutdown
  • From: Geert Uytterhoeven
• [PATCH v2 2/3] serial: sh-sci: Stop TX DMA workqueue during port shutdown
  • From: Geert Uytterhoeven
• [PATCH v2 1/3] serial: sh-sci: Postpone DMA release when falling back to PIO
  • From: Geert Uytterhoeven
• [PATCH v2 3/3] serial: sh-sci: Stop using deprecated dmaengine_terminate_all()
  • From: Geert Uytterhoeven
• [PATCH v2 0/3] serial: sh-sci: Fix port shutdown DMA race conditions
  • From: Geert Uytterhoeven
• Re: [PATCH v3 3/4] dt-bindings: interrupt-controller: add binding for mt6765
  • From: Rob Herring
• Re: [PATCH v3 2/4] dt-bindings: mtk-uart: add mt6765 uart bindings
  • From: Rob Herring
• Re: [PATCH v3 1/4] dt-bindings: mediatek: add support for mt6765 reference board
  • From: Rob Herring
• Re: [PATCH v2 3/3] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• Re: [PATCH v2 3/3] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• Re: [PATCH v2 3/3] serial: 8250_dw: add fractional divisor support
  • From: Andy Shevchenko
• Re: [PATCH v3 4/4] arm64: dts: mediatek: add mt6765 support
  • From: Mars Cheng
• Re: [PATCH v2 2/3] serial: 8250: introduce get_divisor() and set_divisor() hook
  • From: Andy Shevchenko
• Re: [PATCH v2 1/3] serial: 8250: let serial8250_get_divisor() get uart_port * as param
  • From: Andy Shevchenko
• [PATCH v2 3/3] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• [PATCH v2 2/3] serial: 8250: introduce get_divisor() and set_divisor() hook
  • From: Jisheng Zhang
• [PATCH v2 1/3] serial: 8250: let serial8250_get_divisor() get uart_port * as param
  • From: Jisheng Zhang
• [PATCH v2 0/3] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• Re: [PATCH v3 4/4] arm64: dts: mediatek: add mt6765 support
  • From: Marc Zyngier
• Re: [PATCH v3 4/4] arm64: dts: mediatek: add mt6765 support
  • From: Mars Cheng
• Re: [PATCH v3 4/4] arm64: dts: mediatek: add mt6765 support
  • From: Marc Zyngier
• Re: [PATCH v10 1/6] MAINTAINERS: add at91 usart mfd driver
  • From: Lee Jones
• Re: [PATCH v10 2/6] dt-bindings: add binding for atmel-usart in SPI mode
  • From: Lee Jones
• [PATCH v3 3/4] dt-bindings: interrupt-controller: add binding for mt6765
  • From: Mars Cheng
• [PATCH v3 4/4] arm64: dts: mediatek: add mt6765 support
  • From: Mars Cheng
• [PATCH v3 2/4] dt-bindings: mtk-uart: add mt6765 uart bindings
  • From: Mars Cheng
• [PATCH v3 1/4] dt-bindings: mediatek: add support for mt6765 reference board
  • From: Mars Cheng
• [PATCH 0/4] Add basic SoC support for mt6765
  • From: Mars Cheng
• Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt6765 support
  • From: Mars Cheng
• Re: [PATCH v2 1/2] dt-bindings: mediatek: Add bindings for mediatek MT6765 Platform
  • From: Mars Cheng
• Re: [PATCH v2] dt-bindings: serial: imx: clarify rs485 support usage
  • From: Rob Herring
• Re: [PATCH 4/4] Documentation: uartlite: Add clock to the binding
  • From: Rob Herring
• Re: [PATCH 3/4] doc: uartlite: Add binding for the driver
  • From: Rob Herring
• Re: [PATCH 3/4] doc: uartlite: Add binding for the driver
  • From: Rob Herring
• Re: [PATCH v2 1/2] dt-bindings: mediatek: Add bindings for mediatek MT6765 Platform
  • From: Rob Herring
• Re: [PATCH 0/2] serial: 8250_dw: add fractional divisor support
  • From: Andy Shevchenko
• Re: [PATCH 0/2] serial: 8250_dw: add fractional divisor support
  • From: Andy Shevchenko
• Re: [PATCH v2 1/1] serial: imx - Add dma buffer confugration via sysfs
  • From: Greg KH
• Re: [PATCH v2 1/1] serial: imx - Add dma buffer confugration via sysfs
  • From: Uwe Kleine-König
• [PATCH v2 1/1] serial: imx - Add dma buffer confugration via sysfs
  • From: Fabien Lahoudere
• Re: [PATCH v3 23/27] devicetree: fix name of pinctrl-bindings.txt
  • From: Lee Jones
• Re: [PATCH v3 6/8] serial: Add Tegra Combined UART driver
  • From: Mikko Perttunen
• Re: [PATCH v5 0/7] add virt-dma support for imx-sdma
  • From: Robin Gong
• Re: [PATCH 0/2] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• Re: [PATCH 0/2] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt6765 support
  • From: Rob Herring
• Re: [PATCH 4/4] serial: sh-sci: Stop RX FIFO timer during port shutdown
  • From: Rob Landley
• Re: [PATCH v3 0/8] Tegra Combined UART driver
  • From: Thierry Reding
• Re: [PATCH v3 0/8] Tegra Combined UART driver
  • From: Greg KH
• Re: [PATCH v3 0/8] Tegra Combined UART driver
  • From: Thierry Reding
• Re: [PATCH v3 6/8] serial: Add Tegra Combined UART driver
  • From: Thierry Reding
• Re: [PATCH v3 6/8] serial: Add Tegra Combined UART driver
  • From: Mikko Perttunen
• Re: [PATCH v3 6/8] serial: Add Tegra Combined UART driver
  • From: Thierry Reding
• Re: [PATCH v5 0/7] add virt-dma support for imx-sdma
  • From: Vinod
• Re: [PATCH v3 5/8] mailbox: tegra-hsp: Add support for shared mailboxes
  • From: Thierry Reding
• Re: [PATCH v3 4/8] mailbox: tegra-hsp: Refactor in preparation of mailboxes
  • From: Thierry Reding
• Re: [PATCH v3 3/8] mailbox: Add transmit done by blocking option
  • From: Thierry Reding
• Re: [PATCH v3 2/8] dt-bindings: serial: Add bindings for nvidia,tegra194-tcu
  • From: Thierry Reding
• Re: [PATCH v3 1/8] dt-bindings: tegra186-hsp: Add shared interrupts
  • From: Thierry Reding
• Re: [PATCH 0/2] serial: 8250_dw: add fractional divisor support
  • From: Andy Shevchenko
• [PATCH v3 2/8] dt-bindings: serial: Add bindings for nvidia,tegra194-tcu
  • From: Mikko Perttunen
• [PATCH v3 1/8] dt-bindings: tegra186-hsp: Add shared interrupts
  • From: Mikko Perttunen
• [PATCH v3 5/8] mailbox: tegra-hsp: Add support for shared mailboxes
  • From: Mikko Perttunen
• [PATCH v3 6/8] serial: Add Tegra Combined UART driver
  • From: Mikko Perttunen
• [PATCH v3 3/8] mailbox: Add transmit done by blocking option
  • From: Mikko Perttunen
• [PATCH v3 4/8] mailbox: tegra-hsp: Refactor in preparation of mailboxes
  • From: Mikko Perttunen
• [PATCH v3 8/8] arm64: tegra: Mark tcu as primary serial port on Tegra194 P2888
  • From: Mikko Perttunen
• [PATCH v3 7/8] arm64: tegra: Add nodes for tcu on Tegra194
  • From: Mikko Perttunen
• [PATCH v3 0/8] Tegra Combined UART driver
  • From: Mikko Perttunen
• Re: [PATCH 0/2] serial: 8250_dw: add fractional divisor support
  • From: Andy Shevchenko
• [PATCH 2/2] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• [PATCH 1/2] serial: 8250: introduce get_divisor() and set_divisor() hook
  • From: Jisheng Zhang
• [PATCH 0/2] serial: 8250_dw: add fractional divisor support
  • From: Jisheng Zhang
• Re: [PATCH 4/4] serial: sh-sci: Stop RX FIFO timer during port shutdown
  • From: Geert Uytterhoeven
• Re: [PATCH 1/4] tty: serial: uartlite: Add structure for private data
  • From: Shubhrajyoti Datta
• Re: [PATCH v5 0/7] add virt-dma support for imx-sdma
  • From: Robin Gong
• [PATCH 4.4 035/105] lib/vsprintf: Remove atomic-unsafe support for %pCr
  • From: Greg Kroah-Hartman
• [PATCH 4.9 016/101] lib/vsprintf: Remove atomic-unsafe support for %pCr
  • From: Greg Kroah-Hartman
• [PATCH 4.9 015/101] clk: renesas: cpg-mssr: Stop using printk format %pCr
  • From: Greg Kroah-Hartman
• [PATCH 4.14 022/157] clk: renesas: cpg-mssr: Stop using printk format %pCr
  • From: Greg Kroah-Hartman
• Re: [PATCH 4/4] serial: sh-sci: Stop RX FIFO timer during port shutdown
  • From: Rob Landley
• [PATCH 4.17 031/220] thermal: bcm2835: Stop using printk format %pCr
  • From: Greg Kroah-Hartman
• [PATCH 4.17 032/220] clk: renesas: cpg-mssr: Stop using printk format %pCr
  • From: Greg Kroah-Hartman
• [PATCH 4.17 033/220] lib/vsprintf: Remove atomic-unsafe support for %pCr
  • From: Greg Kroah-Hartman
• [PATCH 4.14 023/157] lib/vsprintf: Remove atomic-unsafe support for %pCr
  • From: Greg Kroah-Hartman
• [PATCH 4.14 021/157] thermal: bcm2835: Stop using printk format %pCr
  • From: Greg Kroah-Hartman
• [GIT PULL] TTY/Serial fixes for 4.18-rc3
  • From: Greg KH
• Re: [PATCH v2] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Tycho Andersen
• Re: [PATCH] serial: sh-sci: Stop RX FIFO timer during port shutdown
  • From: Simon Horman
• Re: [PATCH 1/3] serial: sh-sci: Postpone DMA release when falling back to PIO
  • From: Geert Uytterhoeven
• Re: [PATCH 2/4] serial: sh-sci: Stop using deprecated dmaengine_terminate_all()
  • From: Geert Uytterhoeven
• [PATCH] serial: sh-sci: Stop RX FIFO timer during port shutdown
  • From: Geert Uytterhoeven
• [PATCH 1/3] serial: sh-sci: Postpone DMA release when falling back to PIO
  • From: Geert Uytterhoeven
• [PATCH 1/4] serial: sh-sci: Postpone DMA release when falling back to PIO
  • From: Geert Uytterhoeven
• [PATCH 2/4] serial: sh-sci: Stop using deprecated dmaengine_terminate_all()
  • From: Geert Uytterhoeven
• [PATCH 4/4] serial: sh-sci: Stop RX FIFO timer during port shutdown
  • From: Geert Uytterhoeven
• [PATCH 2/3] serial: sh-sci: Stop TX DMA workqueue during port shutdown
  • From: Geert Uytterhoeven
• [PATCH 3/3] serial: sh-sci: Stop using deprecated dmaengine_terminate_all()
  • From: Geert Uytterhoeven
• [PATCH 3/4] serial: sh-sci: Stop TX DMA workqueue during port shutdown
  • From: Geert Uytterhoeven
• [PATCH 0/3] serial: sh-sci: Fix port shutdown DMA race conditions
  • From: Geert Uytterhoeven
• Re: [PATCH v5 1/7] tty: serial: imx: correct dma cookie status
  • From: Vinod
• [PATCH v2] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Tycho Andersen
• Re: [PATCH v2] dt-bindings: serial: imx: clarify rs485 support usage
  • From: Fabio Estevam
• Re: [PATCH 1/4] tty: serial: uartlite: Add structure for private data
  • From: Greg KH
• Re: [PATCH 2/4] tty: serial: uartlite: Add clock adaptation
  • From: Greg KH
• Re: [PATCH] uart: fix race between uart_put_char() and uart_shutdown()
  • From: Greg Kroah-Hartman
• Re: [PATCH v2] dt-bindings: serial: imx: clarify rs485 support usage
  • From: Uwe Kleine-König
• [PATCH v2] dt-bindings: serial: imx: clarify rs485 support usage
  • From: Baruch Siach
• Re: [RFC PATCH v2 1/6] serial: uartps: Do not initialize field to zero again
  • From: Michal Simek
• Re: [RFC][PATCH 0/6] Use printk_safe context for TTY and UART port locks
  • From: Sergey Senozhatsky
• Re: [RFC PATCH v2 1/6] serial: uartps: Do not initialize field to zero again
  • From: Greg Kroah-Hartman
• Re: [RFC PATCH v2 1/6] serial: uartps: Do not initialize field to zero again
  • From: Michal Simek
• [PATCH 3/4] doc: uartlite: Add binding for the driver
  • From: Shubhrajyoti Datta
• [PATCH 4/4] Documentation: uartlite: Add clock to the binding
  • From: Shubhrajyoti Datta
• [PATCH 2/4] tty: serial: uartlite: Add clock adaptation
  • From: Shubhrajyoti Datta
• [PATCH 1/4] tty: serial: uartlite: Add structure for private data
  • From: Shubhrajyoti Datta
• Re: [RFC PATCH v2 1/6] serial: uartps: Do not initialize field to zero again
  • From: Greg Kroah-Hartman
• Re: [PATCH 1/1] serial: imx - Add dma buffer confugration via sysfs
  • From: Uwe Kleine-König
• [PATCH 1/1] serial: imx - Add dma buffer confugration via sysfs
  • From: Fabien Lahoudere
• Re: [PATCH v4 2/7] serdev: add dev_pm_domain_attach|detach()
  • From: Ulf Hansson
• [PATCH v4 2/7] serdev: add dev_pm_domain_attach|detach()
  • From: sean.wang
• RE: [PATCH v5 0/7] add virt-dma support for imx-sdma
  • From: Robin Gong
• Re: [PATCH 1/2] dt-bindings: serial: 8250_omap: Add compatible for AM654 UART controller
  • From: Rob Herring
• Re: [PATCH v5 1/7] tty: serial: imx: correct dma cookie status
  • From: Uwe Kleine-König
• Re: [PATCH v5 0/7] add virt-dma support for imx-sdma
  • From: Lucas Stach
• Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt6765 support
  • From: Mars Cheng
• Re: [PATCH v3 23/27] devicetree: fix name of pinctrl-bindings.txt
  • From: Linus Walleij
• Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt6765 support
  • From: Marc Zyngier
• [PATCH v2 1/2] dt-bindings: mediatek: Add bindings for mediatek MT6765 Platform
  • From: Mars Cheng
• [PATCH v2 2/2] arm64: dts: mediatek: add mt6765 support
  • From: Mars Cheng
• [PATCH 0/2] Add basic SoC support for MT6765
  • From: Mars Cheng
• Re: [PATCH v2 1/8] dt-bindings: tegra186-hsp: Add shared interrupts
  • From: Rob Herring
• [PATCH v10 0/6] Driver for at91 usart in spi mode
  • From: Radu Pirea
• [PATCH v10 4/6] MAINTAINERS: add at91 usart spi driver
  • From: Radu Pirea
• [PATCH v10 3/6] mfd: at91-usart: added mfd driver for usart
  • From: Radu Pirea
• [PATCH v10 2/6] dt-bindings: add binding for atmel-usart in SPI mode
  • From: Radu Pirea
• [PATCH v10 1/6] MAINTAINERS: add at91 usart mfd driver
  • From: Radu Pirea
• [PATCH v10 6/6] tty/serial: atmel: change the driver to work under at91-usart mfd
  • From: Radu Pirea
• [PATCH v10 5/6] spi: at91-usart: add driver for at91-usart as spi
  • From: Radu Pirea
• Re: [PATCH v9 5/6] spi: at91-usart: add driver for at91-usart as spi
  • From: kbuild test robot
• [PATCH v9 0/6] Driver for at91 usart in spi mode
  • From: Radu Pirea
• [PATCH v9 1/6] MAINTAINERS: add at91 usart mfd driver
  • From: Radu Pirea
• [PATCH v9 2/6] dt-bindings: add binding for atmel-usart in SPI mode
  • From: Radu Pirea
• [PATCH v9 3/6] mfd: at91-usart: added mfd driver for usart
  • From: Radu Pirea
• [PATCH v9 4/6] MAINTAINERS: add at91 usart spi driver
  • From: Radu Pirea
• [PATCH v9 6/6] tty/serial: atmel: change the driver to work under at91-usart mfd
  • From: Radu Pirea
• [PATCH v9 5/6] spi: at91-usart: add driver for at91-usart as spi
  • From: Radu Pirea
• Re: [PATCH] dt-bindings: serial: imx: clarify rs485 support usage
  • From: Lothar Waßmann
• [PATCH] dt-bindings: serial: imx: clarify rs485 support usage
  • From: Baruch Siach
• Re: [RFC][PATCH 0/6] Use printk_safe context for TTY and UART port locks
  • From: Sergey Senozhatsky
• Re: [RFC][PATCH 0/6] Use printk_safe context for TTY and UART port locks
  • From: Peter Zijlstra
• Re: [RFC][PATCH 0/6] Use printk_safe context for TTY and UART port locks
  • From: Alan Cox
• Re: [PATCH v5 0/7] add virt-dma support for imx-sdma
  • From: Sascha Hauer
• RE: [PATCH v5 0/7] add virt-dma support for imx-sdma
  • From: Robin Gong
• Re: [PATCH] serial: max310x: Check the clock readiness
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 7/8] arm64: tegra: Add nodes for tcu on Tegra194
  • From: Jon Hunter
• Re: [PATCH v2 6/8] serial: Add Tegra Combined UART driver
  • From: Jon Hunter
• Re: [PATCH v2 5/8] mailbox: tegra-hsp: Add support for shared mailboxes
  • From: Jon Hunter
• Re: [PATCH v2 4/8] mailbox: tegra-hsp: Refactor in preparation of mailboxes
  • From: Jon Hunter
• Re: [PATCH v2 1/8] dt-bindings: tegra186-hsp: Add shared interrupts
  • From: Jon Hunter
• Re: [PATCH v2 2/8] dt-bindings: serial: Add bindings for nvidia,tegra194-tcu
  • From: Jon Hunter
• Re: [PATCH] serial: max310x: Check the clock readiness
  • From: Jan Kundrát
• [PATCH v2 1/8] dt-bindings: tegra186-hsp: Add shared interrupts
  • From: Mikko Perttunen
• [PATCH v2 2/8] dt-bindings: serial: Add bindings for nvidia,tegra194-tcu
  • From: Mikko Perttunen
• [PATCH v2 3/8] mailbox: Add transmit done by blocking option
  • From: Mikko Perttunen
• [PATCH v2 5/8] mailbox: tegra-hsp: Add support for shared mailboxes
  • From: Mikko Perttunen
• [PATCH v2 4/8] mailbox: tegra-hsp: Refactor in preparation of mailboxes
  • From: Mikko Perttunen
• [PATCH v2 7/8] arm64: tegra: Add nodes for tcu on Tegra194
  • From: Mikko Perttunen
• [PATCH v2 6/8] serial: Add Tegra Combined UART driver
  • From: Mikko Perttunen
• [PATCH v2 8/8] arm64: tegra: Mark tcu as primary serial port on Tegra194 P2888
  • From: Mikko Perttunen
• [PATCH v2 0/8] Tegra Combined UART driver
  • From: Mikko Perttunen
• Re: [PATCH 0/2] serial: sh-sci: Use pm_runtime_get_sync()/put()
  • From: Wolfram Sang
• Re: [RFC][PATCH 0/6] Use printk_safe context for TTY and UART port locks
  • From: Sergey Senozhatsky
• Re: [PATCH 0/2] serial: 8250_omap: Add compatible for AM654 UART
  • From: Tony Lindgren
• Re: [RFC][PATCH 0/6] Use printk_safe context for TTY and UART port locks
  • From: Linus Torvalds
• Re: [RFC][PATCH 0/6] Use printk_safe context for TTY and UART port locks
  • From: Sergey Senozhatsky
• Re: [RFC][PATCH 0/6] Use printk_safe context for TTY and UART port locks
  • From: Sergey Senozhatsky
• Re: [RFC][PATCH 0/6] Use printk_safe context for TTY and UART port locks
  • From: Linus Torvalds
• Re: [RFC][PATCH 0/6] Use printk_safe context for TTY and UART port locks
  • From: Steven Rostedt
• Re: [RFC][PATCH 0/6] Use printk_safe context for TTY and UART port locks
  • From: Linus Torvalds
• [PATCH 0/2] serial: 8250_omap: Add compatible for AM654 UART
  • From: Nishanth Menon
• [PATCH 1/2] dt-bindings: serial: 8250_omap: Add compatible for AM654 UART controller
  • From: Nishanth Menon
• [PATCH 2/2] serial: 8250_omap: Add support for AM654 UART controller
  • From: Nishanth Menon
• Re: [PATCH] serial: mps2-uart: Initialize early console
  • From: Guenter Roeck
• Re: [PATCH 4/8] mailbox: tegra-hsp: Refactor in preparation of mailboxes
  • From: Mikko Perttunen
• Re: [PATCH 1/8] dt-bindings: tegra186-hsp: Add shared interrupts
  • From: Mikko Perttunen
• Re: [PATCH] serial: mps2-uart: Initialize early console
  • From: Vladimir Murzin
• [PATCH v5 1/7] tty: serial: imx: correct dma cookie status
  • From: Robin Gong
• [PATCH v5 0/7] add virt-dma support for imx-sdma
  • From: Robin Gong
• [PATCH v5 3/7] dmaengine: imx-sdma: add virt-dma support
  • From: Robin Gong
• [PATCH v5 2/7] dmaengine: imx-sdma: factor out a struct sdma_desc from struct sdma_channel
  • From: Robin Gong
• Re: [RFC][PATCH 0/6] Use printk_safe context for TTY and UART port locks
  • From: Sergey Senozhatsky
• [PATCH v5 5/7] dmaengine: imx-sdma: remove the maximum limitation for bd numbers
  • From: Robin Gong
• [PATCH v5 4/7] dmaengine: imx-sdma: remove useless 'lock' and 'enabled' in 'struct sdma_channel'
  • From: Robin Gong
• [PATCH v5 7/7] dmaengine: imx-sdma: alloclate bd memory from dma pool
  • From: Robin Gong
• [PATCH v5 6/7] dmaengine: imx-sdma: add sdma_transfer_init to decrease code overlap
  • From: Robin Gong
• Re: [RFC][PATCH 0/6] Use printk_safe context for TTY and UART port locks
  • From: Petr Mladek
• Re: [RFC PATCH v2 1/6] serial: uartps: Do not initialize field to zero again
  • From: Michal Simek
• Re: [RFC][PATCH 0/6] Use printk_safe context for TTY and UART port locks
  • From: Peter Zijlstra
• Re: possible deadlock in console_unlock
  • From: Sergey Senozhatsky
• Re: possible deadlock in console_unlock
  • From: Petr Mladek
• Re: [PATCH 1/7] MIPS: dts: Add aliases node for lantiq danube serial
  • From: Wu, Songjun
• [PATCH] serial: mps2-uart: Initialize early console
  • From: Guenter Roeck
• Re: [RFC][PATCH 0/6] Use printk_safe context for TTY and UART port locks
  • From: Sergey Senozhatsky
• Re: [RFC][PATCH 0/6] Use printk_safe context for TTY and UART port locks
  • From: Alan Cox
• Re: [PATCH 4/7] tty: serial: lantiq: Always use readl()/writel()
  • From: Arnd Bergmann
• Re: [PATCH 1/7] MIPS: dts: Add aliases node for lantiq danube serial
  • From: Arnd Bergmann
• [PATCH v8 0/6] Driver for at91 usart in spi mode
  • From: Radu Pirea
• [PATCH v8 1/6] MAINTAINERS: add at91 usart mfd driver
  • From: Radu Pirea
• [PATCH v8 2/6] dt-bindings: add binding for atmel-usart in SPI mode
  • From: Radu Pirea
• [PATCH v8 3/6] mfd: at91-usart: added mfd driver for usart
  • From: Radu Pirea
• [PATCH v8 5/6] spi: at91-usart: add driver for at91-usart as spi
  • From: Radu Pirea
• [PATCH v8 4/6] MAINTAINERS: add at91 usart spi driver
  • From: Radu Pirea
• [PATCH v8 6/6] tty/serial: atmel: change the driver to work under at91-usart mfd
  • From: Radu Pirea
• Re: [PATCH 2/7] clk: intel: Add clock driver for GRX500 SoC
  • From: yixin zhu
• Re: [PATCH 1/7] MIPS: dts: Add aliases node for lantiq danube serial
  • From: Wu, Songjun
• Re: [PATCH 4/7] tty: serial: lantiq: Always use readl()/writel()
  • From: Wu, Songjun
• Re: [RFC][PATCH 1/6] printk: move printk_safe macros to printk header
  • From: Sergey Senozhatsky
• Re: [PATCH v4 22/26] devicetree: fix name of pinctrl-bindings.txt
  • From: Lee Jones
• Re: [PATCH v2 7/9] Bluetooth: hci_h5: Add vendor setup, open, and close callbacks
  • From: kbuild test robot
• Re: [PATCH v2 8/9] Bluetooth: hci_h5: Add support for the RTL8723BS
  • From: kbuild test robot
• [PATCH v2 1/9] Bluetooth: btrtl: add MODULE_FIRMWARE declarations
  • From: Hans de Goede
• [PATCH v2 4/9] Bluetooth: btrtl: add support for the RTL8723BS and RTL8723DS chips
  • From: Hans de Goede
• [PATCH v2 2/9] Bluetooth: btrtl: split the device initialization into smaller parts
  • From: Hans de Goede
• [PATCH v2 3/9] Bluetooth: btrtl: add support for retrieving the UART settings
  • From: Hans de Goede
• [PATCH v2 8/9] Bluetooth: hci_h5: Add support for the RTL8723BS
  • From: Hans de Goede
• [PATCH v2 7/9] Bluetooth: hci_h5: Add vendor setup, open, and close callbacks
  • From: Hans de Goede
• [PATCH v2 9/9] Bluetooth: hci_h5: Add support for enable and device-wake GPIOs
  • From: Hans de Goede
• [PATCH v2 6/9] Bluetooth: hci_h5: Add support for serdev enumerated devices
  • From: Hans de Goede
• [PATCH v2 5/9] Bluetooth: btrtl: Add support for a config filename postfix
  • From: Hans de Goede
• [PATCH v2 0/9] Bluetooth: Add RTL8723BS support
  • From: Hans de Goede
• Re: [RFC PATCH 3/6] serial: 8250_omap: Add support for AM654 UART controller
  • From: Rob Herring
• Re: [RFC PATCH 3/6] serial: 8250_omap: Add support for AM654 UART controller
  • From: Sekhar Nori
• [patch v26 0/4] JTAG driver introduction
  • From: Oleksandr Shamray
• [patch v26 1/4] drivers: jtag: Add JTAG core driver
  • From: Oleksandr Shamray
• [patch v26 3/4] Documentation: jtag: Add bindings for Aspeed SoC 24xx and 25xx families JTAG master driver
  • From: Oleksandr Shamray
• [patch v26 2/4] drivers: jtag: Add Aspeed SoC 24xx and 25xx families JTAG master driver
  • From: Oleksandr Shamray
• [patch v26 4/4] Documentation: jtag: Add ABI documentation
  • From: Oleksandr Shamray
• [PATCH v4 22/26] devicetree: fix name of pinctrl-bindings.txt
  • From: Mauro Carvalho Chehab
• Re: [RFC PATCH 5/6] arm64: dts: ti: Add Support for AM654 SoC
  • From: Sekhar Nori
• [RFC][PATCH 3/6] tty/pty: switch to tty_port helpers
  • From: Sergey Senozhatsky
• [RFC][PATCH 5/6] serial: switch to uart_port locking helpers
  • From: Sergey Senozhatsky
• [RFC][PATCH 6/6] tty: 8250: switch to uart_port locking helpers
  • From: Sergey Senozhatsky
• [RFC][PATCH 4/6] serial: add uart port locking helpers
  • From: Sergey Senozhatsky
• [RFC][PATCH 2/6] tty: add tty_port locking helpers
  • From: Sergey Senozhatsky
• [RFC][PATCH 1/6] printk: move printk_safe macros to printk header
  • From: Sergey Senozhatsky
• [RFC][PATCH 0/6] Use printk_safe context for TTY and UART port locks
  • From: Sergey Senozhatsky
• Re: possible deadlock in console_unlock
  • From: Sergey Senozhatsky
• Re: [RFC PATCH 5/6] arm64: dts: ti: Add Support for AM654 SoC
  • From: Tony Lindgren
• Re: [PATCH v3 2/7] serdev: add dev_pm_domain_attach|detach()
  • From: Sean Wang
• [PATCH v3 23/27] devicetree: fix name of pinctrl-bindings.txt
  • From: Mauro Carvalho Chehab
• Re: [PATCH v2 00/19] Dynamically load/remove serdev devices via sysfs*
  • From: Johan Hovold
• Re: [PATCH v2 00/19] Dynamically load/remove serdev devices via sysfs*
  • From: Ricardo Ribalda Delgado
• Re: [PATCH v2 00/19] Dynamically load/remove serdev devices via sysfs*
  • From: Johan Hovold
• Re: [PATCH v2 00/19] Dynamically load/remove serdev devices via sysfs*
  • From: Ricardo Ribalda Delgado
• [PATCH 4.17 25/45] serial: sh-sci: Stop using printk format %pCr
  • From: Greg Kroah-Hartman
• [PATCH 4.16 25/43] serial: sh-sci: Stop using printk format %pCr
  • From: Greg Kroah-Hartman
• Re: [PATCH 2/7] clk: intel: Add clock driver for GRX500 SoC
  • From: Rob Herring
• [PATCH 4.14 18/36] serial: sh-sci: Stop using printk format %pCr
  • From: Greg Kroah-Hartman
• [PATCH 4.9 19/30] serial: sh-sci: Stop using printk format %pCr
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 00/19] Dynamically load/remove serdev devices via sysfs*
  • From: Johan Hovold
• RE: [PATCH v4 0/7] add virt-dma support for imx-sdma
  • From: Robin Gong
• Re: [RFC PATCH 5/6] arm64: dts: ti: Add Support for AM654 SoC
  • From: Nishanth Menon
• Re: [RFC PATCH 5/6] arm64: dts: ti: Add Support for AM654 SoC
  • From: Tony Lindgren
• Re: [PATCH v2 00/19] Dynamically load/remove serdev devices via sysfs*
  • From: Ricardo Ribalda Delgado
• Re: [PATCH v2 00/19] Dynamically load/remove serdev devices via sysfs*
  • From: Johan Hovold
• Re: [PATCH v4 0/7] add virt-dma support for imx-sdma
  • From: Lucas Stach
• Re: [PATCH v4 0/7] add virt-dma support for imx-sdma
  • From: Robin Gong
• Re: [PATCH 4/7] tty: serial: lantiq: Always use readl()/writel()
  • From: Arnd Bergmann
• Re: [PATCH 1/7] MIPS: dts: Add aliases node for lantiq danube serial
  • From: Arnd Bergmann
• Re: [PATCH 3/7] MIPS: intel: Add initial support for Intel MIPS SoCs
  • From: yixin zhu
• Re: [PATCH v3 2/7] serdev: add dev_pm_domain_attach|detach()
  • From: Ulf Hansson
• Re: [PATCH v4 0/7] add virt-dma support for imx-sdma
  • From: Lucas Stach
• Re: [PATCH 2/7] clk: intel: Add clock driver for GRX500 SoC
  • From: yixin zhu
• Re: [PATCH v7 3/6] mfd: at91-usart: added mfd driver for usart
  • From: Alexandre Belloni
• Re: [PATCH v7 3/6] mfd: at91-usart: added mfd driver for usart
  • From: Radu Pirea
• Re: [PATCH 3/7] MIPS: intel: Add initial support for Intel MIPS SoCs
  • From: Hua Ma
• Re: [PATCH v7 3/6] mfd: at91-usart: added mfd driver for usart
  • From: Ludovic Desroches
• [PATCH v3 2/7] serdev: add dev_pm_domain_attach|detach()
  • From: sean.wang
• Re: [PATCH 4/7] tty: serial: lantiq: Always use readl()/writel()
  • From: Wu, Songjun