On 21/07/18 09:28, Erin Lo wrote: > On Fri, 2018-07-20 at 12:44 +0200, Matthias Brugger wrote: >> >> On 20/07/18 10:19, Erin Lo wrote: >>> On Mon, 2018-07-16 at 11:28 +0200, Matthias Brugger wrote: >>>> Hi Erin, >>>> >>>> On 17/05/18 08:22, Erin Lo wrote: >>>>> MT8183 is a SoC based on 64bit ARMv8 architecture. >>>>> It contains 4 CA53 and 4 CA73 cores. >>>>> MT8183 share many HW IP with MT65xx series. >>>>> This patchset was tested on MT8183 evaluation board, and boot to shell ok. >>>>> >>>>> This series contains document bindings, device tree including interrupt, uart. >>>>> >>>>> Change in v3: >>>>> 1. Fill out GICC, GICH, GICV regions >>>>> 2. Update Copyright to 2018 >>>>> >>>>> Change in v2: >>>>> 1. Split dt-bindings into different patches >>>>> 2. Correct bindings for supported SoCs (mtk-uart.txt) >>>>> >>>>> Ben Ho (1): >>>>> arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and >>>>> Makefile >>>>> >>>>> Erin Lo (3): >>>>> dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform >>>>> dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183 >>>>> dt-bindings: serial: Add compatible for Mediatek MT8183 >>>>> >>>> >>>> I'm a bit reluctant to take this series, as it will only enable the EVB board to >>>> boot into a serial console. Are you planning to add support for other devices of >>>> this SoC? >>>> >>>> Apart please take into account that there is an issue with the dts file, as you >>>> were told by the kbuild test robot. >>>> >>>> Regards, >>>> Matthias >>>> >>> >>> Hi, Matthias >>> Sorry for missing this letter...since mail proxy server. >>> We plan to add support all the devices of MT8183 in serious. >>> We have implemented the clock and pinctrl driver for upstream and they >>> are in internal review right now. >>> >> >> Nice to hear that :) >> >>> About the dts issue... do you suggest me to send new patch right now or >>> wait for clock and pinctrl driver ready then send them together? >>> >> >> I would prefer that you send at least the clock controller together, so that we >> don't have any dummy clocks in the basic device tree. >> >> Regards, >> Matthias >> > > Got it! Next patch, we will send them with clock controller without > dummy clocks in the basic device tree. > By the way, the clock controller driver of MT8183 is a little bit > different from former ICs, so we need more time to prepare them. > We will send them to public as soon as possible. > Thanks for the info. Best regards, Matthias -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
