Re: [PATCH v3 0/4] Add basic support for Mediatek MT8183 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Erin,

On 17/05/18 08:22, Erin Lo wrote:
> MT8183 is a SoC based on 64bit ARMv8 architecture.
> It contains 4 CA53 and 4 CA73 cores.
> MT8183 share many HW IP with MT65xx series.
> This patchset was tested on MT8183 evaluation board, and boot to shell ok.
> 
> This series contains document bindings, device tree including interrupt, uart.
> 
> Change in v3:
> 1. Fill out GICC, GICH, GICV regions
> 2. Update Copyright to 2018
> 
> Change in v2:
> 1. Split dt-bindings into different patches
> 2. Correct bindings for supported SoCs (mtk-uart.txt)
> 
> Ben Ho (1):
>   arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and
>     Makefile
> 
> Erin Lo (3):
>   dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform
>   dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183
>   dt-bindings: serial: Add compatible for Mediatek MT8183
> 

I'm a bit reluctant to take this series, as it will only enable the EVB board to
boot into a serial console. Are you planning to add support for other devices of
this SoC?

Apart please take into account that there is an issue with the dts file, as you
were told by the kbuild test robot.

Regards,
Matthias
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux