From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx> Add support of Common Clock Framework for Uartlite driver. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx> --- v2: removed the suspend resume changes to separate driver drivers/tty/serial/uartlite.c | 49 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 47 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 0f798f7..b3a12be 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -21,6 +21,7 @@ #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/of_platform.h> +#include <linux/clk.h> #define ULITE_NAME "ttyUL" #define ULITE_MAJOR 204 @@ -56,6 +57,7 @@ struct uartlite_data { const struct uartlite_reg_ops *reg_ops; + struct clk *clk; }; struct uartlite_reg_ops { @@ -261,8 +263,15 @@ static void ulite_break_ctl(struct uart_port *port, int ctl) static int ulite_startup(struct uart_port *port) { + struct uartlite_data *pdata = port->private_data; int ret; + ret = clk_enable(pdata->clk); + if (ret) { + dev_err(port->dev, "Failed to enable clock\n"); + return ret; + } + ret = request_irq(port->irq, ulite_isr, IRQF_SHARED | IRQF_TRIGGER_RISING, "uartlite", port); if (ret) @@ -277,9 +286,12 @@ static int ulite_startup(struct uart_port *port) static void ulite_shutdown(struct uart_port *port) { + struct uartlite_data *pdata = port->private_data; + uart_out32(0, ULITE_CONTROL, port); uart_in32(ULITE_CONTROL, port); /* dummy */ free_irq(port->irq, port); + clk_disable(pdata->clk); } static void ulite_set_termios(struct uart_port *port, struct ktermios *termios, @@ -370,6 +382,17 @@ static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser) return -EINVAL; } +static void ulite_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uartlite_data *pdata = port->private_data; + + if (!state) + clk_enable(pdata->clk); + else + clk_disable(pdata->clk); +} + #ifdef CONFIG_CONSOLE_POLL static int ulite_get_poll_char(struct uart_port *port) { @@ -405,6 +428,7 @@ static const struct uart_ops ulite_ops = { .request_port = ulite_request_port, .config_port = ulite_config_port, .verify_port = ulite_verify_port, + .pm = ulite_pm, #ifdef CONFIG_CONSOLE_POLL .poll_get_char = ulite_get_poll_char, .poll_put_char = ulite_put_poll_char, @@ -669,7 +693,6 @@ static int ulite_release(struct device *dev) /* --------------------------------------------------------------------- * Platform bus binding */ - #if defined(CONFIG_OF) /* Match table for of_platform binding */ static const struct of_device_id ulite_of_match[] = { @@ -684,7 +707,7 @@ static int ulite_probe(struct platform_device *pdev) { struct resource *res; struct uartlite_data *pdata; - int irq; + int irq, ret; int id = pdev->id; #ifdef CONFIG_OF const __be32 *prop; @@ -706,11 +729,33 @@ static int ulite_probe(struct platform_device *pdev) if (irq <= 0) return -ENXIO; + pdata->clk = devm_clk_get(&pdev->dev, "s_axi_aclk"); + if (IS_ERR(pdata->clk)) { + if (PTR_ERR(pdata->clk) != -ENOENT) + return PTR_ERR(pdata->clk); + + /* + * Clock framework support is optional, continue on + * anyways if we don't find a matching clock. + */ + pdata->clk = NULL; + } + + ret = clk_prepare(pdata->clk); + if (ret) { + dev_err(&pdev->dev, "Failed to prepare clock\n"); + return ret; + } + return ulite_assign(&pdev->dev, id, res->start, irq, pdata); } static int ulite_remove(struct platform_device *pdev) { + struct uart_port *port = dev_get_drvdata(&pdev->dev); + struct uartlite_data *pdata = port->private_data; + + clk_disable_unprepare(pdata->clk); return ulite_release(&pdev->dev); } -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html