Hi Andy, On 16/07/18 15:04, Andy Shevchenko wrote: > On Mon, 2018-07-16 at 14:59 +0100, Sudip Mukherjee wrote: >> Hi Andy, >> >> On 16/07/18 14:35, Andy Shevchenko wrote: <snip> >> >> I am traveling this week and will be able to test it on the hardware >> on >> the weekend (21st and 22nd). Do you have any specific test to run? > > Since it touches configuration parts and PM it would be nice to test the > following: > - basic stuff that everything work for you as previously (any of your > setup is not broken), or more specific > - a) the board is detected correctly (number of ports, type, etc) > - b) the fractional divisor works as expected on affected boards (if > you supply some baud rate on the board which utilizes fractional part) > - c) open, write/read, close, check PM state of the device; repeat few > times; it will ensure that sleep works as before I also got the same BUG which Aaron mentioned and I can confirm after using suggested ioread8() it was working. Tested with open, read/write, close with the serial port in loopback. Tested with different baudrates also. Also suspended the system and confirmed the ports are working after resume. -- Regards Sudip -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
