On 20/06/18 13:20, Mikko Perttunen wrote:
> The Tegra Combined UART (TCU) is a mailbox-based mechanism that allows
> multiplexing multiple "virtual UARTs" into a single hardware serial
> port. The TCU is the primary serial port on Tegra194 devices.
>
> Add a TCU driver utilizing the mailbox framework, as the used mailboxes
> are part of Tegra HSP blocks that are already controlled by the Tegra
> HSP mailbox driver.
>
> Signed-off-by: Mikko Perttunen <mperttunen@xxxxxxxxxx>
> ---
>
> Notes:
> v2:
> - Removed (void) casts for unused variables.
> - Changed the uart_set_options() call to be on one line, even if its
> over 80 characters.
> - Added defines for magic numbers.
> - Style fixes.
> - Changed Kconfig entry to depend on the Tegra HSP driver instead of
> just the mailbox framework.
>
> drivers/tty/serial/Kconfig | 9 ++
> drivers/tty/serial/Makefile | 1 +
> drivers/tty/serial/tegra-tcu.c | 289 +++++++++++++++++++++++++++++++++++++++
> include/uapi/linux/serial_core.h | 3 +
> 4 files changed, 302 insertions(+)
> create mode 100644 drivers/tty/serial/tegra-tcu.c
>
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index df8bd0c7b97d..5fdd336e8937 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -322,6 +322,15 @@ config SERIAL_TEGRA
> are enabled). This driver uses the APB DMA to achieve higher baudrate
> and better performance.
>
> +config SERIAL_TEGRA_TCU
> + tristate "NVIDIA Tegra Combined UART"
> + depends on ARCH_TEGRA && TEGRA_HSP_MBOX
> + select SERIAL_CORE
> + help
> + Support for the mailbox-based TCU (Tegra Combined UART) serial port.
> + TCU is a virtual serial port that allows multiplexing multiple data
> + streams into a single hardware serial port.
> +
> config SERIAL_MAX3100
> tristate "MAX3100 support"
> depends on SPI
> diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
> index daac675612df..4ad82231ff8a 100644
> --- a/drivers/tty/serial/Makefile
> +++ b/drivers/tty/serial/Makefile
> @@ -76,6 +76,7 @@ obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
> obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
> obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o
> obj-$(CONFIG_SERIAL_TEGRA) += serial-tegra.o
> +obj-$(CONFIG_SERIAL_TEGRA_TCU) += tegra-tcu.o
> obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o
> obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
> obj-$(CONFIG_SERIAL_ARC) += arc_uart.o
> diff --git a/drivers/tty/serial/tegra-tcu.c b/drivers/tty/serial/tegra-tcu.c
> new file mode 100644
> index 000000000000..b54ebe2ad917
> --- /dev/null
> +++ b/drivers/tty/serial/tegra-tcu.c
> @@ -0,0 +1,289 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018, NVIDIA CORPORATION. All rights reserved.
> + */
> +
> +#include <linux/console.h>
> +#include <linux/mailbox_client.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/serial.h>
> +#include <linux/serial_core.h>
> +#include <linux/slab.h>
> +#include <linux/tty.h>
> +#include <linux/tty_flip.h>
> +
> +#define TCU_MBOX_BYTE(i, x) ((x) << (i*8))
> +#define TCU_MBOX_BYTE_V(x, i) (((x) >> (i*8)) & 0xff)
> +#define TCU_MBOX_NUM_BYTES(x) ((x) << 24)
> +#define TCU_MBOX_NUM_BYTES_V(x) (((x) >> 24) & 0x3)
> +#define TCU_MBOX_FLUSH BIT(26)
> +
> +static struct uart_driver tegra_tcu_uart_driver;
> +static struct uart_port tegra_tcu_uart_port;
> +
> +struct tegra_tcu {
> + struct mbox_client tx_client, rx_client;
> + struct mbox_chan *tx, *rx;
> +};
> +
> +static unsigned int tegra_tcu_uart_tx_empty(struct uart_port *port)
> +{
> + return TIOCSER_TEMT;
> +}
> +
> +static void tegra_tcu_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
> +{
> +}
> +
> +static unsigned int tegra_tcu_uart_get_mctrl(struct uart_port *port)
> +{
> + return 0;
> +}
> +
> +static void tegra_tcu_uart_stop_tx(struct uart_port *port)
> +{
> +}
> +
> +static void tegra_tcu_write(const char *s, unsigned int count)
> +{
> + struct tegra_tcu *tcu = tegra_tcu_uart_port.private_data;
> + unsigned int written = 0, i = 0;
> + bool insert_nl = false;
> + uint32_t value = 0;
> +
> + while (i < count) {
> + if (insert_nl) {
> + value |= TCU_MBOX_BYTE(written++, '\n');
> + insert_nl = false;
> + i++;
> + } else if (s[i] == '\n') {
> + value |= TCU_MBOX_BYTE(written++, '\r');
> + insert_nl = true;
> + } else {
> + value |= TCU_MBOX_BYTE(written++, s[i++]);
> + }
> +
> + if (written == 3) {
> + value |= TCU_MBOX_NUM_BYTES(3) | TCU_MBOX_FLUSH;
> + mbox_send_message(tcu->tx, &value);
> + value = 0;
> + written = 0;
> + }
> + }
> +
> + if (written) {
> + value |= TCU_MBOX_NUM_BYTES(written) | TCU_MBOX_FLUSH;
> + mbox_send_message(tcu->tx, &value);
> + }
> +}
> +
> +static void tegra_tcu_uart_start_tx(struct uart_port *port)
> +{
> + struct circ_buf *xmit = &port->state->xmit;
> + unsigned long count;
> +
> + for (;;) {
> + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
> + if (!count)
> + break;
> +
> + tegra_tcu_write(&xmit->buf[xmit->tail], count);
> + xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
> + }
> +
> + uart_write_wakeup(port);
> +}
> +
> +static void tegra_tcu_uart_stop_rx(struct uart_port *port)
> +{
> +}
> +
> +static void tegra_tcu_uart_break_ctl(struct uart_port *port, int ctl)
> +{
> +}
> +
> +static int tegra_tcu_uart_startup(struct uart_port *port)
> +{
> + return 0;
> +}
> +
> +static void tegra_tcu_uart_shutdown(struct uart_port *port)
> +{
> +}
> +
> +static void tegra_tcu_uart_set_termios(struct uart_port *port,
> + struct ktermios *new,
> + struct ktermios *old)
> +{
> +}
> +
> +static const struct uart_ops tegra_tcu_uart_ops = {
> + .tx_empty = tegra_tcu_uart_tx_empty,
> + .set_mctrl = tegra_tcu_uart_set_mctrl,
> + .get_mctrl = tegra_tcu_uart_get_mctrl,
> + .stop_tx = tegra_tcu_uart_stop_tx,
> + .start_tx = tegra_tcu_uart_start_tx,
> + .stop_rx = tegra_tcu_uart_stop_rx,
> + .break_ctl = tegra_tcu_uart_break_ctl,
> + .startup = tegra_tcu_uart_startup,
> + .shutdown = tegra_tcu_uart_shutdown,
> + .set_termios = tegra_tcu_uart_set_termios,
> +};
> +
> +static void tegra_tcu_console_write(struct console *cons, const char *s,
> + unsigned int count)
> +{
> + tegra_tcu_write(s, count);
> +}
> +
> +static int tegra_tcu_console_setup(struct console *cons, char *options)
> +{
> + if (!tegra_tcu_uart_port.private_data)
> + return -ENODEV;
> +
> + return uart_set_options(&tegra_tcu_uart_port, cons, 115200, 'n', 8, 'n');
> +}
I am curious if we actually need to call uart_set_options() here? Given that
set_termios does nothing, is this actually needed?
> +
> +static struct console tegra_tcu_console = {
> + .name = "ttyTCU",
> + .device = uart_console_device,
> + .flags = CON_PRINTBUFFER | CON_ANYTIME,
> + .index = -1,
> + .write = tegra_tcu_console_write,
> + .setup = tegra_tcu_console_setup,
> + .data = &tegra_tcu_uart_driver,
> +};
> +
> +static struct uart_driver tegra_tcu_uart_driver = {
> + .owner = THIS_MODULE,
> + .driver_name = "tegra-tcu",
> + .dev_name = "ttyTCU",
> + .cons = &tegra_tcu_console,
> + .nr = 1,
> +};
> +
> +static void tegra_tcu_receive(struct mbox_client *client, void *msg_p)
> +{
> + struct tty_port *port = &tegra_tcu_uart_port.state->port;
> + uint32_t msg = *(uint32_t *)msg_p;
> + unsigned int num_bytes;
> + int i;
> +
> + num_bytes = TCU_MBOX_NUM_BYTES_V(msg);
> + for (i = 0; i < num_bytes; i++)
> + tty_insert_flip_char(port, TCU_MBOX_BYTE_V(msg, i), TTY_NORMAL);
> +
> + tty_flip_buffer_push(port);
> +}
> +
> +static int tegra_tcu_probe(struct platform_device *pdev)
> +{
> + struct uart_port *port = &tegra_tcu_uart_port;
> + struct tegra_tcu *tcu;
> + int err;
> +
> + tcu = devm_kzalloc(&pdev->dev, sizeof(*tcu), GFP_KERNEL);
> + if (!tcu)
> + return -ENOMEM;
> +
> + tcu->tx_client.dev = &pdev->dev;
> + tcu->rx_client.dev = &pdev->dev;
> + tcu->rx_client.rx_callback = tegra_tcu_receive;
> +
> + tcu->tx = mbox_request_channel_byname(&tcu->tx_client, "tx");
> + if (IS_ERR(tcu->tx)) {
> + err = PTR_ERR(tcu->tx);
> + dev_err(&pdev->dev, "failed to get tx mailbox: %d\n", err);
> + return err;
> + }
> +
> + tcu->rx = mbox_request_channel_byname(&tcu->rx_client, "rx");
> + if (IS_ERR(tcu->rx)) {
> + err = PTR_ERR(tcu->rx);
> + dev_err(&pdev->dev, "failed to get rx mailbox: %d\n", err);
> + goto free_tx;
> + }
> +
> + err = uart_register_driver(&tegra_tcu_uart_driver);
> + if (err) {
> + dev_err(&pdev->dev, "failed to register UART driver: %d\n",
> + err);
> + goto free_rx;
> + }
> +
> + spin_lock_init(&port->lock);
> + port->dev = &pdev->dev;
> + port->type = PORT_TEGRA_TCU;
> + port->ops = &tegra_tcu_uart_ops;
> + port->fifosize = 1;
> + port->iotype = UPIO_MEM;
> + port->flags = UPF_BOOT_AUTOCONF;
> + port->private_data = tcu;
> +
> + err = uart_add_one_port(&tegra_tcu_uart_driver, port);
> + if (err) {
> + dev_err(&pdev->dev, "failed to add UART port: %d\n", err);
> + goto unregister_uart;
> + }
> +
> + return 0;
> +
> +unregister_uart:
> + uart_unregister_driver(&tegra_tcu_uart_driver);
> +free_rx:
> + mbox_free_channel(tcu->rx);
> +free_tx:
> + mbox_free_channel(tcu->tx);
> +
> + return err;
> +}
> +
> +static int tegra_tcu_remove(struct platform_device *pdev)
> +{
> + uart_remove_one_port(&tegra_tcu_uart_driver, &tegra_tcu_uart_port);
> + uart_unregister_driver(&tegra_tcu_uart_driver);
mbox_free_channel()?
> +
> + return 0;
> +}
> +
> +static const struct of_device_id tegra_tcu_match[] = {
> + { .compatible = "nvidia,tegra194-tcu" },
> + { }
> +};
> +
> +static struct platform_driver tegra_tcu_driver = {
> + .driver = {
> + .name = "tegra-tcu",
> + .of_match_table = tegra_tcu_match,
> + },
> + .probe = tegra_tcu_probe,
> + .remove = tegra_tcu_remove,
> +};
> +
> +static int __init tegra_tcu_init(void)
> +{
> + int err;
> +
> + err = platform_driver_register(&tegra_tcu_driver);
> + if (err)
> + return err;
> +
> + register_console(&tegra_tcu_console);
> +
> + return 0;
> +}
> +module_init(tegra_tcu_init);
> +
> +static void __exit tegra_tcu_exit(void)
> +{
> + unregister_console(&tegra_tcu_console);
> + platform_driver_unregister(&tegra_tcu_driver);
> +}
> +module_exit(tegra_tcu_exit);
> +
> +MODULE_AUTHOR("Mikko Perttunen <mperttunen@xxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("NVIDIA Tegra Combined UART driver");
> diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
> index dce5f9dae121..69883c32cb98 100644
> --- a/include/uapi/linux/serial_core.h
> +++ b/include/uapi/linux/serial_core.h
> @@ -79,6 +79,9 @@
> /* Nuvoton UART */
> #define PORT_NPCM 40
>
> +/* NVIDIA Tegra Combined UART */
> +#define PORT_TEGRA_TCU 41
> +
> /* Intel EG20 */
> #define PORT_PCH_8LINE 44
> #define PORT_PCH_2LINE 45
>
Otherwise looks good to me.
Cheers
Jon
--
nvpublic
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
