From: Owen Chen <owen.chen@xxxxxxxxxxxx> 1. pcwibits: The integer bits of pcw for plls is extend to 8 bits, add a variable to indicate this change and backward-compatible. 2. fmin: The pll freqency lower-bound is vary from 1GMhz to 1.5Ghz, add a variable to indicate platform-dependent. Signed-off-by: Owen Chen <owen.chen@xxxxxxxxxxxx> --- drivers/clk/mediatek/clk-mtk.h | 2 ++ drivers/clk/mediatek/clk-pll.c | 45 ++++++++++++++++++++++++++++++++++------ 2 files changed, 41 insertions(+), 6 deletions(-) diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h index f83c2bb..1882221 100644 --- a/drivers/clk/mediatek/clk-mtk.h +++ b/drivers/clk/mediatek/clk-mtk.h @@ -215,7 +215,9 @@ struct mtk_pll_data { const struct clk_ops *ops; u32 rst_bar_mask; unsigned long fmax; + unsigned long fmin; int pcwbits; + int pcwibits; uint32_t pcw_reg; int pcw_shift; const struct mtk_pll_div_table *div_table; diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c index f54e401..df571e5 100644 --- a/drivers/clk/mediatek/clk-pll.c +++ b/drivers/clk/mediatek/clk-pll.c @@ -27,7 +27,7 @@ #define CON0_BASE_EN BIT(0) #define CON0_PWR_ON BIT(0) #define CON0_ISO_EN BIT(1) -#define CON0_PCW_CHG BIT(31) +#define CON1_PCW_CHG BIT(31) #define AUDPLL_TUNER_EN BIT(31) @@ -69,11 +69,13 @@ static unsigned long __mtk_pll_recalc_rate(struct mtk_clk_pll *pll, u32 fin, { int pcwbits = pll->data->pcwbits; int pcwfbits; + int ibits; u64 vco; u8 c = 0; /* The fractional part of the PLL divider. */ - pcwfbits = pcwbits > INTEGER_BITS ? pcwbits - INTEGER_BITS : 0; + ibits = pll->data->pcwibits ? pll->data->pcwibits : INTEGER_BITS; + pcwfbits = pcwbits > ibits ? pcwbits - ibits : 0; vco = (u64)fin * pcw; @@ -93,9 +95,31 @@ static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw, { u32 con1, val; int pll_en; + u32 tuner_en = 0; + u32 tuner_en_mask; + void __iomem *tuner_en_addr = NULL; pll_en = readl(pll->base_addr + REG_CON0) & CON0_BASE_EN; + /* disable tuner */ + if (pll->tuner_en_addr) { + tuner_en_addr = pll->tuner_en_addr; + tuner_en_mask = BIT(pll->data->tuner_en_bit); + } else if (pll->tuner_addr) { + tuner_en_addr = pll->tuner_addr; + tuner_en_mask = AUDPLL_TUNER_EN; + } + + if (tuner_en_addr) { + val = readl(tuner_en_addr); + tuner_en = val & tuner_en_mask; + + if (tuner_en) { + val &= ~tuner_en_mask; + writel(val, tuner_en_addr); + } + } + /* set postdiv */ val = readl(pll->pd_addr); val &= ~(POSTDIV_MASK << pll->data->pd_shift); @@ -116,12 +140,20 @@ static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw, con1 = readl(pll->base_addr + REG_CON1); if (pll_en) - con1 |= CON0_PCW_CHG; + con1 |= CON1_PCW_CHG; writel(con1, pll->base_addr + REG_CON1); + if (pll->tuner_addr) writel(con1 + 1, pll->tuner_addr); + /* restore tuner_en */ + if (tuner_en_addr && tuner_en) { + val = readl(tuner_en_addr); + val |= tuner_en_mask; + writel(val, tuner_en_addr); + } + if (pll_en) udelay(20); } @@ -138,9 +170,10 @@ static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw, static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv, u32 freq, u32 fin) { - unsigned long fmin = 1000 * MHZ; + unsigned long fmin = pll->data->fmin ? pll->data->fmin : 1000 * MHZ; const struct mtk_pll_div_table *div_table = pll->data->div_table; u64 _pcw; + int ibits; u32 val; if (freq > pll->data->fmax) @@ -164,7 +197,8 @@ static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv, } /* _pcw = freq * postdiv / fin * 2^pcwfbits */ - _pcw = ((u64)freq << val) << (pll->data->pcwbits - INTEGER_BITS); + ibits = pll->data->pcwibits ? pll->data->pcwibits : INTEGER_BITS; + _pcw = ((u64)freq << val) << (pll->data->pcwbits - ibits); do_div(_pcw, fin); *pcw = (u32)_pcw; @@ -192,7 +226,6 @@ static unsigned long mtk_pll_recalc_rate(struct clk_hw *hw, postdiv = (readl(pll->pd_addr) >> pll->data->pd_shift) & POSTDIV_MASK; postdiv = 1 << postdiv; - pcw = readl(pll->pcw_addr) >> pll->data->pcw_shift; pcw &= GENMASK(pll->data->pcwbits - 1, 0); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html