[PATCH] serial: sh-sci: Stop RX FIFO timer during port shutdown

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The RX FIFO timer may be armed when the port is shut down, hence the
timer function may still be called afterwards.

Fix this race condition by deleting the timer during port shutdown.

Fixes: 039403765e5da3c6 ("serial: sh-sci: SCIFA/B RX FIFO software timeout")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
Tested with scifa0 on r8a7740/armadillo, after

    echo 2000 > /sys/devices/platform/e6c40000.serial/rx_fifo_timeout
---
 drivers/tty/serial/sh-sci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 5c870ab80b98e25b..04f5b754e69e28dd 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2100,6 +2100,8 @@ static void sci_shutdown(struct uart_port *port)
 	}
 #endif
 
+	if (s->rx_trigger > 1 && s->rx_fifo_timeout > 0)
+		del_timer_sync(&s->rx_fifo_timer);
 	sci_free_irq(s);
 	sci_free_dma(port);
 }
-- 
2.17.1

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux