On Wed, 11 Jul 2018, Nicolas Ferre wrote: > On 25/06/2018 at 19:22, Radu Pirea wrote: > > Hello, > > > > This is the second version of driver. I added a mfd driver which by > > default probes atmel_serial driver and if in dt is specified to probe > > the spi driver, then the spi-at91-usart driver will be probed. The > > compatible for atmel_serial is now the compatible for at91-usart mfd > > driver and compatilbe for atmel_serial driver was changed in order to > > keep the bindings for serial as they are. > > > > Changes in v10: > > -fixed kbuild test robot warning > > > > Changes in v9: > > - minor changes > > - rebased on top of broonie/for-4.19 > > > > Changes in v8: > > - fixed passing an empty mfd cell if "atmel,usart-mode" value is invalid > > > > Changes in v7: > > - synced up SPDIX license with module license > > - numbering of usart modes starts from 0 insteand of 1 > > > > Changes in v6: > > - removed unused compatible strings from serial and spi drivers > > > > Changes in v5: > > - fixed usage of stdout-path property with atmel_serial driver > > > > Changes in v4: > > - modified the spi driver to use cs gpio support form spi subsystem > > - fixed dma transfers for serial driver > > - squashed binding for spi and serial and moved them to mfd/atmel-usart.txt > > > > Changes in v3: > > - fixed spi slaves probing > > > > Changes in v2: > > - added at91-usart mfd driver > > - modified spi-at91-usart driver to work as mfd driver child > > - modified atmel_serial driver to work as mfd driver child > > > > Changes in v1: > > - added spi-at91-usart driver > > > > > > Radu Pirea (6): > > MAINTAINERS: add at91 usart mfd driver > > dt-bindings: add binding for atmel-usart in SPI mode > > mfd: at91-usart: added mfd driver for usart > > MAINTAINERS: add at91 usart spi driver > > spi: at91-usart: add driver for at91-usart as spi > > tty/serial: atmel: change the driver to work under at91-usart mfd > > For the record or if needed by the MAINTAINERS changes, you can add my: > Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx> > for the whole series. > > Once the remarks by Mark are addressed, you can certainly re-send the series > with all tags collected for Lee to take it, if he is okay with this process, > of course... That's fine. No problem. -- Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
