Hi,
Some comments on the ranges below.
* Nishanth Menon <nm@xxxxxx> [180607 16:41]:
> + soc0: soc0 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
I suggest you leave out the soc0, that's not real. Just make
the cbass@0 the top level interconnect. It can then provide
ranges to mcu interconnect which can provide ranges to the wkup
interconnect. So just model it after what's in the hardware :)
I found the following ranges based on a quick look at the TRM,
they could be split further if needed for power domains for
genpd for example.
main covers
0x0000000000 - 0x5402000000
main provides at least the following ranges for mcu
0x0028380000 - 0x002bc00000
0x0040080000 - 0x0041c80000
0x0045100000 - 0x0045180000
0x0045600000 - 0x0045640000
0x0045810000 - 0x0045860000
0x0045950000 - 0x0045950400
0x0045a50000 - 0x0045a50400
0x0045b04000 - 0x0045b06400
0x0045d10000 - 0x0045d24000
0x0046000000 - 0x0060000000
0x0400000000 - 0x0800000000
0x4c3c020000 - 0x4c3c030000
0x4c3e000000 - 0x4c3e040000
0x5400000000 - 0x5402000000
then mcu provides the following ranges for wkup
0x0042000000 - 0x0044410020
0x0045000000 - 0x0045030000
0x0045080000 - 0x00450a0000
0x0045808000 - 0x0045808800
0x0045b00000 - 0x0045b02400
This based on looking at "figure 1-1. device top-level
block diagram" and the memory map in TRM.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
