For Synopsys DesignWare 8250 uart which version >= 4.00a, there's a
valid divisor latch fraction register. The fractional divisor width is
4bits ~ 6bits.
Now the preparation is done, it's easy to add the feature support.
This patch firstly tries to get the fractional divisor width during
probe, then setups dw specific get_divisor() and set_divisor() hook.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_dw.c | 45 +++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index fa8a00e8c9c6..ad08d7a3b93b 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -31,6 +31,7 @@
/* Offsets for the DesignWare specific registers */
#define DW_UART_USR 0x1f /* UART Status Register */
+#define DW_UART_DLF 0xc0 /* Divisor Latch Fraction Register */
#define DW_UART_CPR 0xf4 /* Component Parameter Register */
#define DW_UART_UCV 0xf8 /* UART Component Version */
@@ -55,6 +56,7 @@
struct dw8250_data {
u8 usr_reg;
+ u8 dlf_size;
int line;
int msr_mask_on;
int msr_mask_off;
@@ -366,6 +368,37 @@ static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
return param == chan->device->dev->parent;
}
+/*
+ * divisor = div(I) + div(F)
+ * "I" means integer, "F" means fractional
+ * quot = div(I) = clk / (16 * baud)
+ * frac = div(F) * 2^dlf_size
+ *
+ * let rem = clk % (16 * baud)
+ * we have: div(F) * (16 * baud) = rem
+ * so frac = 2^dlf_size * rem / (16 * baud) = (rem << dlf_size) / (16 * baud)
+ */
+static unsigned int dw8250_get_divisor(struct uart_port *p,
+ unsigned int baud,
+ unsigned int *frac)
+{
+ unsigned int quot, rem;
+ struct dw8250_data *d = p->private_data;
+
+ quot = p->uartclk / (16 * baud);
+ rem = p->uartclk % (16 * baud);
+ *frac = DIV_ROUND_CLOSEST(rem << d->dlf_size, 16 * baud);
+
+ return quot;
+}
+
+static void dw8250_set_divisor(struct uart_port *p, unsigned int baud,
+ unsigned int quot, unsigned int quot_frac)
+{
+ dw8250_writel_ext(p, DW_UART_DLF, quot_frac);
+ serial8250_do_set_divisor(p, baud, quot, quot_frac);
+}
+
static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
{
if (p->dev->of_node) {
@@ -426,6 +459,18 @@ static void dw8250_setup_port(struct uart_port *p)
dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
+ dw8250_writel_ext(p, DW_UART_DLF, ~0U);
+ reg = dw8250_readl_ext(p, DW_UART_DLF);
+ dw8250_writel_ext(p, DW_UART_DLF, 0);
+
+ if (reg) {
+ struct dw8250_data *d = p->private_data;
+
+ d->dlf_size = fls(reg);
+ p->get_divisor = dw8250_get_divisor;
+ p->set_divisor = dw8250_set_divisor;
+ }
+
reg = dw8250_readl_ext(p, DW_UART_CPR);
if (!reg)
return;
--
2.18.0
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
