From: vabhav <vabhav.sharma@xxxxxxx> Numbering the ttyLPn space should not depend on the generic name "serial<n>". If don't add the alias node like:"serial0 = &lpuart0;", then lpuart will probe failed: [ 0.773410] fsl-lpuart 2950000.serial: failed to get alias id, errno -19 So remove the alias node dependence, and add the support for allocate the line port automatically. v2: Incorporated Review comments https://patchwork.kernel.org/patch/9473977/ Signed-off-by: Yuan Yao <yao.yuan@xxxxxxx> Signed-off-by: vabhav <vabhav.sharma@xxxxxxx> --- drivers/tty/serial/fsl_lpuart.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 51e47a6..00f06eb 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -232,6 +232,8 @@ /* IMX lpuart has four extra unused regs located at the beginning */ #define IMX_REG_OFF 0x10 +static DEFINE_IDA(fsl_lpuart_ida); + struct lpuart_port { struct uart_port port; struct clk *clk; @@ -2142,8 +2144,11 @@ static int lpuart_probe(struct platform_device *pdev) ret = of_alias_get_id(np, "serial"); if (ret < 0) { - dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); - return ret; + ret = ida_simple_get(&fsl_lpuart_ida, 0, UART_NR, GFP_KERNEL); + if (ret < 0) { + dev_err(&pdev->dev, "port line is full, add device failed\n"); + return ret; + } } if (ret >= ARRAY_SIZE(lpuart_ports)) { dev_err(&pdev->dev, "serial%d out of range\n", ret); @@ -2245,6 +2250,8 @@ static int lpuart_remove(struct platform_device *pdev) uart_remove_one_port(&lpuart_reg, &sport->port); + ida_simple_remove(&fsl_lpuart_ida, sport->port.line); + clk_disable_unprepare(sport->clk); if (sport->dma_tx_chan) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
