Hi, here's v3. Changes are in individual patches. Acks are still missing from the following patches: mailbox: Add transmit done by blocking option mailbox: tegra-hsp: Refactor in preparation of mailboxes mailbox: tegra-hsp: Add support for shared mailboxes serial: Add Tegra Combined UART driver Thanks, Mikko Original message: Hi all, on Tegra194, the primary console UART is the "Tegra Combined UART", or TCU. This is a "virtual UART", where each consumer communicates with a central implementation over mailboxes. The central implementation then multiplexes the streams and arbitrates use of a hardware serial port. This driver implements the consumer portion to allow using the primary console. The series is split into the following parts: * patches 1 and 2 add the device tree bindings for mailbox and tcu itself. * patch 3 adds a blocking transmission option to the mailbox framework. * patches 4 and 5 add support for the "shared mailbox" primitive to the Tegra HSP driver. * patch 6 adds the TCU driver itself * patches 7 and 8 do the necessary device tree changes. The series has been tested on the Tegra194 P2972 board. Mikko Perttunen (8): dt-bindings: tegra186-hsp: Add shared interrupts dt-bindings: serial: Add bindings for nvidia,tegra194-tcu mailbox: Add transmit done by blocking option mailbox: tegra-hsp: Refactor in preparation of mailboxes mailbox: tegra-hsp: Add support for shared mailboxes serial: Add Tegra Combined UART driver arm64: tegra: Add nodes for tcu on Tegra194 arm64: tegra: Mark tcu as primary serial port on Tegra194 P2888 .../bindings/mailbox/nvidia,tegra186-hsp.txt | 3 + .../bindings/serial/nvidia,tegra194-tcu.txt | 35 +++ arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 2 +- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 34 ++- drivers/mailbox/mailbox.c | 30 +- drivers/mailbox/mailbox.h | 1 + drivers/mailbox/tegra-hsp.c | 320 +++++++++++++++++---- drivers/tty/serial/Kconfig | 9 + drivers/tty/serial/Makefile | 1 + drivers/tty/serial/tegra-tcu.c | 291 +++++++++++++++++++ include/uapi/linux/serial_core.h | 3 + 11 files changed, 661 insertions(+), 68 deletions(-) create mode 100644 Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt create mode 100644 drivers/tty/serial/tegra-tcu.c -- 2.16.1 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
