Linux on ARM based TI OMAP SoCs
[Prev Page][Next Page]
- Re: [PATCH 1/2] omap: pm34xx: Enable IO / IO-CHAIN wakeups for PER, (continued)
- [PATCH v5] board-omap3-beagle: add DSS2 support,
Koen Kooi
- [PATCH v4] board-omap3-beagle: add DSS2 support,
Koen Kooi
- [PATCH v3] board-omap3-beagle: add DSS2 support,
Koen Kooi
- [PATCH v2] board-omap3-beagle: add DSS2 support,
Koen Kooi
- [PATCH 0/11] Some am3517 related patches [V2],
Stanley.Miao
- [PATCH 01/12] omap: remove one of the define of INT_34XX_BENCH_MPU_EMUL,
Stanley.Miao
- [PATCH 02/12] AM3517: Add platform init code for EMAC driver,
Stanley.Miao
- [PATCH 03/12] AM3517: rename the i2c boardinfo to make it more readable,
Stanley.Miao
- [PATCH 04/12] AM3517: Add platform init code for regulator driver,
Stanley.Miao
- [PATCH 05/12] AM3517: Add audio codec platform data,
Stanley.Miao
- [PATCH 06/12] AM3517: Add nand platform data for am3517evm,
Stanley.Miao
- [PATCH 07/12] AM3517: initialize i2c subsystem after mux subsystem,
Stanley.Miao
- [PATCH 08/12] OMAP: fix a gpmc nand problem,
Stanley.Miao
- [PATCH 09/12] AM3517: Update the config file of am3517evm,
Stanley.Miao
- [PATCH 10/12] omap: init the gpio pinmux for mmc,
Stanley.Miao
- [PATCH 11/12] omap hsmmc: fix the hsmmc driver for am3517.,
Stanley.Miao
- [PATCH 12/12] AM3517: Add mmc platform data for am3517evm,
Stanley.Miao
- [INFO] Serial "no clocks available" warning for 3630 SDP,
Venkatraman S
- [RFC] [PATCH 3/3] OMAP4: Keyboard Kernel Configuration,
Arce, Abraham
- [RFC] [PATCH 2/3] OMAP4: Keyboard Board Support,
Arce, Abraham
- [RFC] [PATCH 1/3] OMAP4: Keyboard Controller Support,
Arce, Abraham
- [RFC] [PATCH 0/3] OMAP4 Keyboard Controller Support,
Arce, Abraham
- Recall: [PATCH] omap3: NAND Prefetch in IRQ mode support,
Ghorai, Sukumar
- Recall: [PATCH 8/8] omap3: GPMC register definition at common location,
Ghorai, Sukumar
- Recall: [PATCH] omap-3630 NAND: enable NAND io in prefetch-irq mode,
Ghorai, Sukumar
- Recall: [PATCH] omap: NAND: ecc layout select from board file,
Ghorai, Sukumar
- Recall: [PATCH] omap: NAND: Making ecc layout as compatible with romcode ecc,
Ghorai, Sukumar
- Recall: [PATCH] nand support on omap3 boards,
Ghorai, Sukumar
- [PATCH] nand support on omap3 boards,
Sukumar Ghorai
- [PATCH] DSPBRIDGE:Fix Kernel memory poison overwritten after DSP_MMUFAULT,
Deepak Chitriki
- musb_hdrc: OTG port does not work in host mode,
Thomas Klute
- [PATCH v2] OMAP3: I2C: Errata ID i207: Clear wrong RDR interrupt,
Manjunatha GK
- [PATCHV3] OMAP3: SDRC : Errata 1.176 Fix - Accesses to DDR stall in SDRC after a Warm-reset,
Vishwanath BS
- [PATCH] omap2_mcspi: add turbo mode support,
Roman Tereshonkov
- [PATCH 0/11] Some am3517 related patches,
Stanley.Miao
- [PATCH 01/11] omap: remove one of the define of INT_34XX_BENCH_MPU_EMUL,
Stanley.Miao
- [PATCH 02/11] AM3517: Add platform init code for EMAC driver,
Stanley.Miao
- [PATCH 03/11] AM3517: rename the i2c boardinfo to make it more readable,
Stanley.Miao
- [PATCH 04/11] AM3517: Add platform init code for regulator driver,
Stanley.Miao
- [PATCH 05/11] AM3517: Add audio codec platform data,
Stanley.Miao
- [PATCH 06/11] AM3517: Add nand platform data for am3517evm,
Stanley.Miao
- [PATCH 08/11] OMAP: fix a gpmc nand problem,
Stanley.Miao
- [PATCH 07/11] AM3517: initialize i2c subsystem after mux subsystem,
Stanley.Miao
- [PATCH 09/11] omap: init the gpio pinmux for mmc,
Stanley.Miao
- [PATCH 10/11] omap hsmmc: fix the hsmmc driver for am3517.,
Stanley.Miao
- [PATCH 11/11] AM3517: Add mmc platform data for am3517evm,
Stanley.Miao
- [PATCHv3 0/2] omap-sham: OMAP SHA1/MD5 driver,
Dmitry Kasatkin
- [PM][PATCH v3 2/4] OMAP3: Serial: Errata i202: fix for MDR1 access,
Nishanth Menon
- [PATCH-V2 1/2] OMAP: LCD LS037V7DW01: Add Backlight driver support,
hvaibhav
- [PATCH-V2 2/2] OMAP: OMAP3EVM: Add LCD Backlight brightness hookup function,
hvaibhav
- [PATCH 3/3] Serial: Add omap-serial platform data support.,
Govindraj.R
- [PATCH 2/3] Serial: Remove 8250 driver assumptions,
Govindraj.R
- [PATCH 1/3] serial: Add OMAP high-speed UART driver,
Govindraj.R
- [PATCH 0/3] Serial: Adding support for HS-UART Omap-serial driver,
Govindraj.R
- [PATCH] board-omap3-beagle: add DSS2 support,
Koen Kooi
- [PATCH] omap2_mcspi: change default DMA_MIN_BYTES value to 160,
Roman Tereshonkov
- [PATCH] Add OHCI USB platform init,
viral.mehta
- [PATCH] select ARCH_OMAP_OTG for OMAP2430 SDP,
viral.mehta
- [PATCH] omap: Add I2C bus 1 initialisation,
viral.mehta
- [PM][PATCH v2 2/4] OMAP3: Serial: Errata i202: fix for MDR1 access,
Nishanth Menon
- OMAP35xx Boot failure,
Jerry Johns
- [PATCH] OMAP3 PM: Workaround for DPLL3 Lock issue,
Vishwanath BS
- [PATCH] DSPBRIDGE: Avoid possible buffer overflow in load_lib,
Guzman Lugo, Fernando
- [PATCH] DSPBRIDGE: Avoid possible NULL pointer dereference in dspbridge,
Guzman Lugo, Fernando
- [PATCH] DSPBRIDGE: MMU-Fault debugging enhancements,
Guzman Lugo, Fernando
- [PATCH 13/13] DSPBRIDGE: Remove signature definitions used for object validation,
Gomez Castellanos, Ivan
- [PATCH 12/13] DSPBRIDGE: Remove dw_signature field from structures,
Gomez Castellanos, Ivan
- [PATCH 11/13] DSPBRIDGE: Remove IS_VALID_HANDLE function and macro,
Gomez Castellanos, Ivan
- [PATCH 10/13] DSPBRIDGE: Remove CHNL_IS_VALID_MGR and CHNL_IS_VALID_CHNL,
Gomez Castellanos, Ivan
- [PATCH 09/13] DSPBRIDGE: Remove mem.c and mem.h files,
Gomez Castellanos, Ivan
- [PATCH 08/13] DSPBRIDGE: Check pointer instead of using MEM_IS_VALID_HANDLE macro,
Gomez Castellanos, Ivan
- [PATCH 07/13] DSPBRIDGE: Replace MEM_FREE_OBJECT macro by kfree function,
Gomez Castellanos, Ivan
- [PATCH 06/13] DSPBRIDGE: Replace MEM_ALLOC_OBJECT macro by kzalloc function,
Gomez Castellanos, Ivan
- [PATCH 05/13] DSPBRIDGE: Remove mem_init and mem_exit functions,
Gomez Castellanos, Ivan
- [PATCH 04/13] DSPBRIDGE: Moving macros from mem.h to drv.h,
Gomez Castellanos, Ivan
- [PATCH 03/13] DSPBRIDGE: Moving functions from mem.c to drv.c,
Gomez Castellanos, Ivan
- [PATCH 02/13] DSPBRIDGE: Replace mem_alloc() by kmalloc(),
Gomez Castellanos, Ivan
- [PATCH 00/13] Remove mem.c and mem.h files,
Gomez Castellanos, Ivan
- [PATCH 01/13] DSPBRIDGE: Replace mem_calloc() by kzalloc() or __vmalloc(),
Gomez Castellanos, Ivan
- [PATCH 00/19] generic clk module removal,
Omar Ramirez Luna
- [PATCH] rwsem generic spinlock: use IRQ save/restore spinlocks,
Kevin Hilman
- [PM][PATCH 0/4] OMAP3: Serial Misc fixes,
Nishanth Menon
- [PATCH] ARM: OMAP: Beagle: make u-boot nand partition writable,
Steve Sakoman
- [PATCH] ARM: OMAP: Overo: Add support for second ethernet port,
Steve Sakoman
- [PATCHv2] ARM: OMAP: Beagle: use new gpmc nand infrastructure,
Steve Sakoman
- [PATCHv2] ARM: OMAP: Overo: use new gpmc nand infrastructure,
Steve Sakoman
- [PATCHv2 0/5] OMAP: RX51: Add LCD Panel Support for N900,
Roger Quadros
- [PATCH V2] OMAP: GPIO: Fix OMAP4 GPIO reg access issues,
Charulatha V
- OMAP4 keypad driver,
Arce, Abraham
- [PATCHv2] OMAP2: DSS: Add Innolux 7" display for DEVKIT8000,
swirl
- ARM: OMAP: Beagle: use new gpmc nand infrastructure,
Steve Sakoman
- ARM: OMAP: Overo: use new gpmc nand infrastructure,
Steve Sakoman
- [PATCH] omap1: amsdelta: defconfig updates,
Janusz Krzysztofik
- [RFC PATCH 00/37] cbus patches,
felipe . balbi
- [RFC PATCH 02/37] cbus: NULL global variable on exit,
felipe . balbi
- [RFC PATCH 05/37] cbus: rely on gpiolib,
felipe . balbi
- [RFC PATCH 11/37] cbus: handle possible errors on cbus_send/receive_bit,
felipe . balbi
- [RFC PATCH 16/37] cbus: retu: split one MODULE_AUTHOR into several,
felipe . balbi
- [RFC PATCH 03/37] cbus: checkpatch.pl fix on cbus.c,
felipe . balbi
- [RFC PATCH 22/37] cbus: tahvo: don't assign ret inside if (),
felipe . balbi
- [RFC PATCH 06/37] cbus: no ternary on return,
felipe . balbi
- [RFC PATCH 10/37] cbus: move cbus_host definition to C source,
felipe . balbi
- [RFC PATCH 19/37] cbus: retu: convert to a platform_driver,
felipe . balbi
- [RFC PATCH 14/37] cbus: retu-wdt: fix compile breakage,
felipe . balbi
- [RFC PATCH 20/37] cbus: tahvo: split MODULE_AUTHOR into several entries,
felipe . balbi
- [RFC PATCH 27/37] cbus: retu-headset: simplify module_init,
felipe . balbi
- [RFC PATCH 31/37] cbus: retu-rtc: get rid of globals,
felipe . balbi
- [RFC PATCH 28/37] cbus: retu-rtc: remove platform_device code,
felipe . balbi
- [RFC PATCH 26/37] cbus: retu-pwrbutton: convert to platform_driver,
felipe . balbi
- [RFC PATCH 35/37] cbus: retu-wdt: remove the platform_device,
felipe . balbi
- [RFC PATCH 29/37] cbus: retu-rtc: convert to platform_driver,
felipe . balbi
- [RFC PATCH 23/37] cbus: tahvo: convert printk into dev_*,
felipe . balbi
- [RFC PATCH 25/37] cbus: retu: allocate platform_device for Retu's children,
felipe . balbi
- [RFC PATCH 24/37] cbus: tahvo: convert to platform_driver,
felipe . balbi
- [RFC PATCH 08/37] cbus: don't type case when issuing read/write,
felipe . balbi
- [RFC PATCH 32/37] cbus: retu-rtc: move retu_rtc_barrier up on source code,
felipe . balbi
- [RFC PATCH 13/37] cbus: add kerneldoc,
felipe . balbi
- [RFC PATCH 36/37] cbus: retu-wtd: convert to platform_driver,
felipe . balbi
- [RFC PATCH 21/37] cbus: tahvo: move EXPORT_SYMBOL macros closer to functions,
felipe . balbi
- [RFC PATCH 09/37] cbus: fix a resource leakage,
felipe . balbi
- [RFC PATCH 17/37] cbus: retu: don't assing ret inside the if (),
felipe . balbi
- [RFC PATCH 04/37] cbus: don't export the global cbus_host variable,
felipe . balbi
- [RFC PATCH 18/37] cbus: retu: convert printk to dev_*,
felipe . balbi
- [RFC PATCH 37/37] cbus: retu-wdt: misc cleanup on retu-wdt driver,
felipe . balbi
- [RFC PATCH 07/37] cbus: add read/write flag to cbus_transfer,
felipe . balbi
- [RFC PATCH 01/37] cbus: convert u32 base to void __iomem *base,
felipe . balbi
- [RFC PATCH 12/37] cbus: introduce cbus_send/receive_data wrappers,
felipe . balbi
- [RFC PATCH 15/37] cbus: retu: fix compile breakage on retu-headset,
felipe . balbi
- [RFC PATCH 30/37] cbus: retu-rtc: split MODULE_AUTHOR into several entries,
felipe . balbi
- [RFC PATCH 33/37] cbus: retu-rtc: make checkpatch.pl happy,
felipe . balbi
- [RFC PATCH 34/37] cbus: retu-rtc: switch to rtc class device,
felipe . balbi
- Re: [RFC PATCH 00/37] cbus patches,
Tony Lindgren
- [PATCH] arm: omap1: fix section mismatch on clk_init(),
Felipe Balbi
- [PATCH 0/6] omap4 i2c board support and fixes,
Santosh Shilimkar
- [PATCH 1/2] Enable DVI-D output for Devkit8000,
Kan-Ru Chen
- linux-omap-pm troubles on Gumstix Overo,
Peter Tseng
- RE: [ASK] OMAP 3430 LDP Trouble,
Gadiyar, Anand
- [PATCH 3/3] DSPBRIDGE: remove hw_prcm module and related functions,
Guzman Lugo, Fernando
- [PATCH 2/3] DSPBRIDGE: remove HW_DSPSS_BootModeSet function,
Guzman Lugo, Fernando
- [PATCH 1/3] DSPBRIDGE: remove unused module parameters,
Guzman Lugo, Fernando
- [PATCH 0/3] DSPBRIDGE: Cleanup hw directory and module parameter,
Guzman Lugo, Fernando
- [PATCH 0/5] Initial change for merge of new board,
Laine Walker-Avina
- [PATCH 0/2] OMAP: Flash device support 3630 sdp board,
Sukumar Ghorai
- [PM-WIP-OPP][PATCH] OMAP3630 PM: Update for OPP 1GHz,
Vishwanath BS
- [PM-WIP-OPP][PATCH] OMAP3 PM: Fix issue with opp_find_freq_floor,
Vishwanath BS
- Re: [PATCH] omap: select ARCH_OMAP_OTG for OMAP2430,
Felipe Balbi
- Re: [PATCH] omap: Add OHCI USB platform init for OMAP2430,
Felipe Balbi
- Re: [PATCH] omap: Add I2C bus 1 initialisation for OMAP2430,
Felipe Balbi
dspbridge: rebasing missing patches from dspbridge-pm,
Omar Ramirez Luna
[PATCH] omap: gpio: fix incorrect matching of IRQ_TYPE_EDGE_BOTH,
Janusz Krzysztofik
OMAP 3430 LDP Trouble,
Tar Gz
[PATCH] DSPBRIDGE: Change max channels/open channels type to u8,
Hebbar, Shivananda
[PATCH] DSPBRIDGE: Change dw_type to u8.,
Hebbar, Shivananda
[PATCH] DSPBRIDGE: Change num_proc type to u8.,
Hebbar, Shivananda
[PATCH] DSPBRIDGE: Change channel mode type to u8,
Hebbar, Shivananda
[PATCH] DSPBRIDGE: Change dw_state type to u8,
Hebbar, Shivananda
[PATCH] DSPBRIDGE:Change dev_type to u8,
Hebbar, Shivananda
[PATCH RFC v2 0/5] usb: ohci: introduce ohci-hcd driver for omap3,
Anand Gadiyar
[PATCH] dma: fix scope of errata i88 upto 3430ES1.0,
Venkatraman S
[PATCH] OMAP GPTimer for OProfile(Errata#628216),
Manjunatha GK
[PATCH 2/2] [STAGING] Synaptic : Add threaded IRQ support,
Hemanth V
[PATCH 1/2] [STAGING] Synaptic : Remove non-standard multi touch support,
Hemanth V
[PATCH 0/2] [STAGING] Synaptic Touchscreen Driver,
Hemanth V
[PATCH] OMAP3: I2C: Errata i207: Clear wrong RDR interrupt,
Manjunatha GK
[PATCH V4 0/2] OMAP3: Dynamic Calculation of SDRC stall latency during DVFS,
Pramod Gurav
[RESEND: PATCH-V6 0/2] OMAP2/3: Add V4L2 display driver support,
hvaibhav
RE: [PATCH 3/8] OMAP2:GPIO:Add support for early platform gpio device,
Varadarajan, Charulatha
[PATCHV3 0/2] MPU/IVA bypass clock configuration,
Vishwanath BS
[PATCH]OMAP HSMMC: Fix a bug in card remove scenario,
Madhusudhan Chikkature
[PATCH] Disable the non working eMMC on Zoom2/3,
Madhusudhan Chikkature
[GIT PULL] OMAP clock/hwmod fixes for 2.6.34-rc,
Paul Walmsley
[RFC/PATCH 0/4] teach gpiolib about gpio debouncing,
Felipe Balbi
[PATCH 0/8 RFC] OMAP: GPIO: Split OMAP1 and OMAP2PLUS,
Charulatha V
[Index of Archives]
[Linux USB Devel]
[Linux Media]
[Video for Linux]
[Big List of Linux Books]
[Linux WPAN Networking]
[Linux SCSI]
[Scanners]
[Yosemite Forum]
