Aldyth,
1. Do you mean that NAND boot is not working?
2. Does MMC/SD boot working? If yes, boot the platform from MMC/SD using the latest x-loade/ u-boot and flush the same binaries to NAND using the following commands.
mmcinit 0
nand unlock 80000 80000
nand erase 80000 80000
fatload mmc 0 80000000 u-boot.bin
nand write.i 80000000 80000 ${filesize}
nand unlock 0 80000
nand erase 0 80000
fatload mmc 0 80000000 MLO
nand write.i 80000000 0 ${filesize}
Regards,
Ghorai
> -----Original Message-----
> From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap-
> owner@xxxxxxxxxxxxxxx] On Behalf Of Tar Gz
> Sent: 2010-04-04 11:13
> To: linux-omap
> Subject: [ASK] OMAP 3430 LDP Trouble
>
> Hi all,
> i'm sorry if my english too bad
>
> I try to porting linux to omap 3430 LDP..but my board have trouble
> after i running this command:
>
> nand ecc sw
> nand unlock 80000 80000
> nand erase 80000 80000
>
> nand ecc hw
> nand unlock 0 80000
> nand erase 0 80000
>
> and if i try to turn on my board, BT led [blue led] always on and my
> minicom can't show anything...and i forget to setting the enviroment
> variable mmcinit..
>
> my question is, how to make my board can run normally like before?
>
> best regards,
> Aldyth M
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
