On 04/06/2010 02:40 PM, Tar Gz wrote:
i don't know, i'm forget to setting up my environment variable mmcinit
or my sd card can't booting / bootable....but if i'm boot from nadn
and can enter prompt, my ldp board can read my sd card...can load
kernel from my sd card
You'll be much better off figuring out how to boot from the SD card.
There are many "how to" documents on this for the OMAP - just follow
the cookbook. Then you'll have the pieces you need to repair your
NAND copy and move on.
On 4/7/10, Gary Thomas<gary@xxxxxxxxxxxx> wrote:
On 04/06/2010 02:27 PM, Tar Gz wrote:
yes, i can't boot from nand because i erase it and i can't boot from
my sd card..
Why can't you boot from the SD card?
okey i will try boot from serial..hope this help
best regards,
Aldyth M
On 4/7/10, Gadiyar, Anand<gadiyar@xxxxxx> wrote:
Gadiyar, Anand wrote:
Tar Gz wrote:
if NAND support is currently missing for OMAP3430 LDP,,how i boot my
ldp again like before?...any idea?
<snip>
If I understand you correctly, you now have a non-booting
LDP, and want
to get a bootloader flashed on it?
You may need to do a serial boot.
Maybe this (old, and no longer maintained) page will help?
<https://gforge.ti.com/gf/project/omapzoom/wiki/?pagename=BootingAndFlashing>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
