On Tue, Jun 22, 2010 at 7:43 PM, Ghorai, Sukumar <s-ghorai@xxxxxx> wrote: > > >> -----Original Message----- >> From: zhangfei gao [mailto:zhangfei.gao@xxxxxxxxx] >> Sent: Tuesday, June 22, 2010 4:51 PM >> To: Chikkature Rajashekar, Madhusudhan >> Cc: Tony Lindgren; Menon, Nishanth; Ghorai, Sukumar; linux- >> omap@xxxxxxxxxxxxxxx; linux-mmc@xxxxxxxxxxxxxxx >> Subject: Re: [PATCH] Disable the non working eMMC on Zoom2/3 >> >> On Sat, May 8, 2010 at 5:25 AM, Madhusudhan <madhu.cr@xxxxxx> wrote: >> > >> > >> >> -----Original Message----- >> >> From: Tony Lindgren [mailto:tony@xxxxxxxxxxx] >> >> Sent: Thursday, May 06, 2010 10:31 AM >> >> To: Madhusudhan >> >> Cc: 'Nishanth Menon'; 'Ghorai, Sukumar'; linux-omap@xxxxxxxxxxxxxxx; >> >> linux-mmc@xxxxxxxxxxxxxxx >> >> Subject: Re: [PATCH] Disable the non working eMMC on Zoom2/3 >> >> >> >> * Madhusudhan <madhu.cr@xxxxxx> [100505 18:31]: >> >> > >> >> > >> >> > > -----Original Message----- >> >> > > From: Tony Lindgren [mailto:tony@xxxxxxxxxxx] >> >> > >> >> > > And what about this "Simulate multi mmc card as one big" patch? >> >> > > >> >> > Did not get you, what patch are you referring to? >> >> >> >> Oops sorry forgot the link: >> >> >> >> https://patchwork.kernel.org/patch/87944/ >> >> >> > This will not help. I don't know the history of the patch but what this >> is >> > intended for is to support multiple MMC cards connected to a single >> > controller. But on the Zoom the eMMC we are talking about is connected >> to >> > MMC2. >> > >> > Regards, >> > Madhu >> > >> >> Tony >> > >> > -- >> > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in >> > the body of a message to majordomo@xxxxxxxxxxxxxxx >> > More majordomo info at http://vger.kernel.org/majordomo-info.html >> > >> >> Hi, Guys >> >> Just wander whether 16G Micron eMMC works on your platform. >> I also have such issue, 16G Micron emmc can not work with read and >> write, with data timeout. >> While 8G Micron eMMC workable. >> Do you have the same issue? > > [Ghorai] we have 16G eMMC in ZOOM3 and 3630-SDP and its working fine. Let me know what board you are using. > mmc1: new high speed MMC card at address 0001 > PM: Adding info for mmc:mmc1:0001 > mmcblk0: mmc1:0001 STM16G 14.8 GiB > PM: Adding info for No Bus:mmcblk0 > mmcblk0: p1 p2 >> >> Thanks > Hi, Ghorai Thanks for your valueable info. We also enabled Micron 16G eMMC, two issues stuck us before. 1. The bus_width should be inited otherwise read ext_csd would be fail. 2. The emmc may stay in boot partition and kernel should switch to user partition, where filesystem is located. Thanks -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
