DMA errata for special end of block programming is applicable
only for OMAP2430 & OMAP3430 ES1.0.
This patch does the necessary checks before the workaround
is applied. Tested on 3430 SDP
Signed-off-by: Thara Gopinath <thara@xxxxxx>
Signed-off-by: Venkatraman S <svenkatr@xxxxxx>
---
arch/arm/plat-omap/dma.c | 22 ++++++++++++++--------
1 files changed, 14 insertions(+), 8 deletions(-)
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 2ab224c..ef965ac 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1663,14 +1663,18 @@ int omap_stop_dma_chain_transfers(int chain_id)
channels = dma_linked_lch[chain_id].linked_dmach_q;
/*
- * DMA Errata:
- * Special programming model needed to disable DMA before end of block
+ * DMA Errata: i88
+ * Special programming model needed
+ * to disable DMA before end of block
*/
sys_cf = dma_read(OCP_SYSCONFIG);
- l = sys_cf;
- /* Middle mode reg set no Standby */
- l &= ~((1 << 12)|(1 << 13));
- dma_write(l, OCP_SYSCONFIG);
+ if (cpu_is_omap2430() || (cpu_is_omap3430() &&
+ omap_rev() == OMAP3430_REV_ES1_0)) {
+ l = sys_cf;
+ /* Middle mode reg set no Standby */
+ l &= ~((1 << 12)|(1 << 13));
+ dma_write(l, OCP_SYSCONFIG);
+ }
for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
@@ -1689,8 +1693,10 @@ int omap_stop_dma_chain_transfers(int chain_id)
/* Reset the Queue pointers */
OMAP_DMA_CHAIN_QINIT(chain_id);
- /* Errata - put in the old value */
- dma_write(sys_cf, OCP_SYSCONFIG);
+ /* Errata: put back the old value */
+ if (cpu_is_omap2430() || (cpu_is_omap3430() &&
+ omap_rev() == OMAP3430_REV_ES1_0))
+ dma_write(sys_cf, OCP_SYSCONFIG);
return 0;
}
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
