Linux for Texus Instruments OMAP Processors
[Prev Page][Next Page]
- Re: [PATCH] dt-bindings: ti-tsc-adc: Add new compatible for AM654 SoCs
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 04/16] remoteproc/pru: Add PRU remoteproc driver
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH] dt-bindings: ti-tsc-adc: Add new compatible for AM654 SoCs
- From: Vignesh R <vigneshr@xxxxxx>
- Re: [PATCH v2 2/3] clk: ti: check clock type before doing autoidle ops
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH 2/2] Input: omap-keypad: Fix idle configration to not block SoC idle states
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [RFC PATCH net-next 2/5] net: 8021q: vlan_dev: add vid tag for uc and mc address lists
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: [RFC PATCH net-next 0/5] net: allow hw addresses for virtual devices
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: [RFC PATCH net-next 2/5] net: 8021q: vlan_dev: add vid tag for uc and mc address lists
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [RFC PATCH net-next 2/5] net: 8021q: vlan_dev: add vid tag for uc and mc address lists
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: [net-next][PATCH 0/4] davinci_emac: read the MAC address from nvmem
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] Input: omap-keypad: Fix idle configration to not block SoC idle states
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC PATCH net-next 0/5] net: allow hw addresses for virtual devices
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [RFC PATCH net-next 2/5] net: 8021q: vlan_dev: add vid tag for uc and mc address lists
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH 1/2] Input: omap-keypad: Fix keyboard debounce configuration
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 2/2] Input: omap-keypad: Fix idle configration to not block SoC idle states
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [RFC PATCH net-next 1/5] net: core: dev_addr_lists: add VID to device address space
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [RFC PATCH net-next 0/5] net: allow hw addresses for virtual devices
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [RFC PATCH net-next 3/5] net: 8021q: vlan_dev: add vid tag for vlan device mac address
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [RFC PATCH net-next 5/5] net: ethernet: ti: cpsw: update mc vlan and add uc vlan support based on addr vids
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [RFC PATCH net-next 4/5] net: ethernet: add default vid len for all ehternet kind devices
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [RFC PATCH net-next 2/5] net: 8021q: vlan_dev: add vid tag for uc and mc address lists
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: [PATCH v2 2/3] clk: ti: check clock type before doing autoidle ops
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v2 2/3] clk: ti: check clock type before doing autoidle ops
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] mfd: ti_am335x_tscadc: Use PLATFORM_DEVID_AUTO while registering mfd cells
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- [GIT PULL] Immutable branch between MFD and IIO due for the v4.21 merge window
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- [PATCH v2 2/2] iio: adc: ti_am335x_tscadc: Improve accuracy of measurement
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH v2 1/2] mfd: ti_am335x_tscadc: Use PLATFORM_DEVID_AUTO while registering mfd cells
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH v2 0/2] tscadc: Couple of fixes
- From: Vignesh R <vigneshr@xxxxxx>
- Re: [PATCH 2/2] iio: adc: ti_am335x_tscadc: Improve accuracy of measurement
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- [PATCH 15/22] mfd: tps65910: Make it explicitly non-modular
- From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
- [PATCH v2 00/22] mfd: demodularization of non-modular drivers
- From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
- Re: [PATCH 00/17] Add support for TI PRU ICSS
- From: "Derald D. Woods" <woods.technical@xxxxxxxxx>
- [PATCH 2/2] Input: omap-keypad: Fix idle configration to not block SoC idle states
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/2] Input: omap-keypad: Fix keyboard debounce configuration
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCHv2] phy: mapphone-mdm6600: Improve phy related runtime PM calls
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] media: omap2: omapfb: convert to DEFINE_SHOW_ATTRIBUTE
- From: Frank Lee <tiny.windzz@xxxxxxxxx>
- [PATCH v2] media: omap2: omapfb: convert to DEFINE_SHOW_ATTRIBUTE
- From: Yangtao Li <tiny.windzz@xxxxxxxxx>
- Re: [PATCH] media: omap2: omapfb: convert to DEFINE_SHOW_ATTRIBUTE
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH] media: omap2: omapfb: convert to DEFINE_SHOW_ATTRIBUTE
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH] mmc: convert to DEFINE_SHOW_ATTRIBUTE
- From: Yangtao Li <tiny.windzz@xxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: ti_am335x_tscadc: Improve accuracy of measurement
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] media: omap2: omapfb: convert to DEFINE_SHOW_ATTRIBUTE
- From: Yangtao Li <tiny.windzz@xxxxxxxxx>
- Re: [GIT PULL 4/4] defconfig changes for omaps for v4.21
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [GIT PULL 1/4] soc changes for omaps for v4.21
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [GIT PULL 2/4] driver changes for omaps for v4.21
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [GIT PULL 3/4] dts changes for omaps for v4.21
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [PATCH v2 2/3] clk: ti: check clock type before doing autoidle ops
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [GIT PULL] few minor fixes for omaps for v4.20-rc cycle
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [PATCH 04/16] remoteproc/pru: Add PRU remoteproc driver
- From: Dimitar Dimitrov <dinuxbg@xxxxxxxxx>
- Re: [PATCH] wlcore: Fix BUG with clear completion on timeout
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 2/3] clk: ti: check clock type before doing autoidle ops
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] ARM: dts: am335x-pdu001: Fix polarity of card detection input
- From: Felix Brack <fb@xxxxxxx>
- Re: USB3-OTG on OMAP5EVM (and Pyra)
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH net-next] net: ethernet: ti: cpsw: drop vid0 configuration in dual_mac modey
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: [PATCH net-next] net: ethernet: ti: cpsw: drop vid0 configuration in dual_mac modey
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: USB3-OTG on OMAP5EVM (and Pyra)
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH] wlcore: Fix BUG with clear completion on timeout
- From: Adam Ford <aford173@xxxxxxxxx>
- Re: USB3-OTG on OMAP5EVM (and Pyra)
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v2 2/3] clk: ti: check clock type before doing autoidle ops
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH 12/16] dt-bindings: remoteproc: ti-pruss: Document application node bindings
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v2 0/3] mach-omap2: handle autoidle denial
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH v2 2/3] clk: ti: check clock type before doing autoidle ops
- From: Tero Kristo <t-kristo@xxxxxx>
- [net-next][PATCH 0/4] davinci_emac: read the MAC address from nvmem
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [net-next][PATCH 2/4] net: cadence: switch to using nvmem_get_mac_address()
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [net-next][PATCH 3/4] of: net: kill of_get_nvmem_mac_address()
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [net-next][PATCH 4/4] net: davinci_emac: use nvmem_get_mac_address()
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [net-next][PATCH 1/4] net: ethernet: provide nvmem_get_mac_address()
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v2 0/3] mach-omap2: handle autoidle denial
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v2 2/3] clk: ti: check clock type before doing autoidle ops
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v2 0/3] mach-omap2: handle autoidle denial
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH v2 2/3] clk: ti: check clock type before doing autoidle ops
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH v2 2/3] clk: ti: check clock type before doing autoidle ops
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v2 2/3] clk: ti: check clock type before doing autoidle ops
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v2 0/3] mach-omap2: handle autoidle denial
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v2 2/3] clk: ti: check clock type before doing autoidle ops
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH] net: ethernet: ti: cpsw: allow to configure min tx packet size
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH net-next] net: ethernet: ti: cpsw: drop vid0 configuration in dual_mac modey
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH] mmc: core: Lower max_seg_size if too high for DMA
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] ARM: OMAP1: devices: configure omap1_spi100k only on OMAP7xx
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP1/2: fix SoC name printing
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/3] ARN: OMAP1: ams-delta: Post-GPIO-refresh cleanups
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP: PM: Change to use DEFINE_SHOW_ATTRIBUTE macro
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP1: clock: Change to use DEFINE_SHOW_ATTRIBUTE macro
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP1: ams-delta: Provide GPIO lookup table for LED device
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP1: ams-delta: make board header file local to mach-omap1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL 4/4] defconfig changes for omaps for v4.21
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL 3/4] dts changes for omaps for v4.21
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL 2/4] driver changes for omaps for v4.21
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL 1/4] soc changes for omaps for v4.21
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 10/25] net: ethernet: provide nvmem_get_mac_address()
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH] mmc: core: Lower max_seg_size if too high for DMA
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: dra7: Move the ti,no-idle quirk on proper gmac node
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 4/4] ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL] few minor fixes for omaps for v4.20-rc cycle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 10/25] net: ethernet: provide nvmem_get_mac_address()
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH 12/16] dt-bindings: remoteproc: ti-pruss: Document application node bindings
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH 01/17] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH 01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH net-next] net: ethernet: ti: cpsw: drop vid0 configuration in dual_mac modey
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: [PATCH] net: ethernet: ti: cpsw: allow to configure min tx packet size
- From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
- RE: [PATCH] net: ethernet: ti: cpsw: allow to configure min tx packet size
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: [PATCH 01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 05/16] remoteproc/pru: Add pru-specific debugfs support
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 12/16] dt-bindings: remoteproc: ti-pruss: Document application node bindings
- From: Roger Quadros <rogerq@xxxxxx>
- USB3-OTG on OMAP5EVM (and Pyra)
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH 04/16] remoteproc/pru: Add PRU remoteproc driver
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 02/16] remoteproc: Add a rproc_set_firmware() API
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 01/17] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH] net: ethernet: ti: cpsw: allow to configure min tx packet size
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH] net: ethernet: ti: cpsw: allow to configure min tx packet size
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH] ARM: dts: dra7: Move the ti,no-idle quirk on proper gmac node
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH] net: ethernet: ti: cpsw: allow to configure min tx packet size
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH] net: ethernet: ti: cpsw: allow to configure min tx packet size
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH net-next] net: ethernet: ti: cpsw: drop vid0 configuration in dual_mac modey
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH] net: ethernet: ti: cpsw: allow to configure min tx packet size
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Applied "dt-bindings: sound: omap-mcpdm: Update documentation for pdmclk" to the asoc tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 08/17] soc: ti: pruss: Add a PRUSS irqchip driver for PRUSS interrupts
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH 01/17] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH 4/4] ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 1/2] mfd: ti_am335x_tscadc: Provide unique name for child mfd cells
- From: Vignesh R <vigneshr@xxxxxx>
- Re: [PATCH 1/2] mfd: ti_am335x_tscadc: Provide unique name for child mfd cells
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- [PATCH] ARM: dts: dra7: Move the ti,no-idle quirk on proper gmac node
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH 1/2] mfd: ti_am335x_tscadc: Provide unique name for child mfd cells
- From: Vignesh R <vigneshr@xxxxxx>
- Re: [PATCH 2/2] iio: adc: ti_am335x_tscadc: Improve accuracy of measurement
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 1/2] mfd: ti_am335x_tscadc: Provide unique name for child mfd cells
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] net: ethernet: ti: cpsw: allow to configure min tx packet size
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH] net: ethernet: ti: cpsw: allow to configure min tx packet size
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH linux-next 09/10] dt-bindings: net: ti: deprecate cpsw-phy-sel bindings
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH linux-next 01/10] dt-bindings: phy: add cpsw port interface mode selection phy bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 4/4] ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 08/17] soc: ti: pruss: Add a PRUSS irqchip driver for PRUSS interrupts
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 06/17] soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 01/17] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 4/4] ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCHv5 0/6] omapdrm: DSI command mode panel support
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Add support for PCIe MMU on DRA7xx / AM57xx
- From: "Ralf Goebel" <ralf.goebel@xxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH net-next] net: ethernet: ti: cpsw: drop vid0 configuration in dual_mac modey
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH 01/17] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 12/16] dt-bindings: remoteproc: ti-pruss: Document application node bindings
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH 05/16] remoteproc/pru: Add pru-specific debugfs support
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH 04/16] remoteproc/pru: Add PRU remoteproc driver
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH 02/16] remoteproc: Add a rproc_set_firmware() API
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH 01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH 13/17] soc: ti: pruss: export pruss_intc_configure/unconfigure APIs
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH 11/17] soc: ti: pruss: add pruss_get()/put() API
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH 10/17] soc: ti: pruss_intc: Add API to trigger a PRU sysevent
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH 09/17] soc: ti: pruss: add pruss_{request,release}_mem_region() API
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH 08/17] soc: ti: pruss: Add a PRUSS irqchip driver for PRUSS interrupts
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH 06/17] soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH 01/17] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH net-next] net: ethernet: ti: cpsw: drop vid0 configuration in dual_mac modey
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: [PATCH linux-next 09/10] dt-bindings: net: ti: deprecate cpsw-phy-sel bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 01/17] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 08/17] soc: ti: pruss: Add a PRUSS irqchip driver for PRUSS interrupts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH net-next] net: ethernet: ti: cpsw: drop vid0 configuration in dual_mac modey
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH 15/17] ARM: dts: AM33xx: Add the PRU-ICSS DT nodes
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH 17/17] ARM: dts: am335x-*: Enable PRU-ICSS nodes
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH net-next] net: ethernet: ti: cpsw: drop vid0 configuration in dual_mac modey
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: [RFC 0/9] ASoC/ARM: Merge the davinci and omap audio directories
- From: Sekhar Nori <nsekhar@xxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Thierry Reding <treding@xxxxxxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Thierry Reding <treding@xxxxxxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Thierry Reding <treding@xxxxxxxxxx>
- Re: [PATCHv5 0/6] omapdrm: DSI command mode panel support
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCHv5 4/6] drm/omap: fix incorrect union usage
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCHv5 2/6] drm/omap: populate DSI platform bus earlier
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCHv5 1/6] drm/omap: use DRM_DEBUG_DRIVER instead of CORE
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 08/17] soc: ti: pruss: Add a PRUSS irqchip driver for PRUSS interrupts
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 08/17] soc: ti: pruss: Add a PRUSS irqchip driver for PRUSS interrupts
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 02/16] remoteproc: Add a rproc_set_firmware() API
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 04/16] remoteproc/pru: Add PRU remoteproc driver
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 05/16] remoteproc/pru: Add pru-specific debugfs support
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 06/16] dt-bindings: remoteproc: ti-pruss: Update bindings for supporting rpmsg
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 07/16] remoteproc/pru: Add support for virtio rpmsg stack
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 08/16] remoteproc/pru: Add pru_rproc_set_ctable() function
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 10/16] remoteproc/pru: add pru_rproc_get_id() API to retrieve the PRU id
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 13/16] remoteproc/pru: add support for configuring GPMUX based on client setup
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 12/16] dt-bindings: remoteproc: ti-pruss: Document application node bindings
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 11/16] soc: ti: pruss: add helper functions to set GPI mode, MII_RT_event and XFR
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 14/16] remoteproc/pru: configure firmware based on client setup
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 16/16] remoteproc/pru: Add support for INTC Interrupt map resource
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 15/16] remoteproc/pru: add support for parsing pru interrupt mapping from DT
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 09/16] remoteproc/pru: add APIs to get and put the PRU cores
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 03/16] remoteproc: Add support to handle device specific resource types
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 00/16] remoteproc: Add support for TI PRU
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 01/17] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH] net: ethernet: ti: cpsw: allow to configure min tx packet size
- From: Andrew Lunn <andrew@xxxxxxx>
- [PATCH linux-next 01/10] dt-bindings: phy: add cpsw port interface mode selection phy bindings
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH linux-next 06/10] ARM: dts: dm814x: switch to use phy-gmii-sel
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH linux-next 07/10] ARM: dts: am4372: switch to use phy-gmii-sel
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH linux-next 05/10] ARM: dts: dra7: switch to use phy-gmii-sel
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH linux-next 02/10] phy: ti: introduce phy-gmii-sel driver
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH linux-next 09/10] dt-bindings: net: ti: deprecate cpsw-phy-sel bindings
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH linux-next 08/10] ARM: dts: am335x: switch to use phy-gmii-sel
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH linux-next 10/10] net: ethernet: ti: cpsw: deprecate cpsw-phy-sel driver
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH linux-next 03/10] dt-bindings: net: ti: cpsw: switch to use phy-gmii-sel phy
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH linux-next 04/10] net: ethernet: ti: cpsw: add support for port interface mode selection phy
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH linux-next 00/10] net: ethernet: ti: cpsw: replace cpsw-phy-sel with phy driver
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH net-next] net: ethernet: ti: cpsw: drop vid0 configuration in dual_mac mode
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH] net: ethernet: ti: cpsw: allow to configure min tx packet size
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH 2/2] iio: adc: ti_am335x_tscadc: Improve accuracy of measurement
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v2 3/5] USB: omap_udc: fix omap_udc_start() on 15xx machines
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- [PATCH v2 1/5] USB: omap_udc: use devm_request_irq()
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- [PATCH v2 4/5] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- [PATCH v2 2/5] USB: omap_udc: fix crashes on probe error and module removal
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- [PATCH v2 5/5] USB: omap_udc: fix rejection of out transfers when DMA is used
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- [PATCH v2 0/5] omap_udc bug fixes
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCHv5 4/6] drm/omap: fix incorrect union usage
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Subject: [PATCH v4 0/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 1/4] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] phy: mapphone-mdm6600: Improve phy related runtime PM calls
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 14/17] ARM: OMAP2+: use pdata quirks for PRUSS reset lines on AM335x
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 08/17] soc: ti: pruss: Add a PRUSS irqchip driver for PRUSS interrupts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 07/17] soc: ti: pruss: enable OCP master ports in SYSCFG always
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 05/17] soc: ti: pruss: Configure SYSCFG properly during probe/remove
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 01/17] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: pinctrl: k3: Introduce pinmux definitions
- From: Nishanth Menon <nm@xxxxxx>
- Applied "ASoC: omap-mcbsp: Fix latency value calculation for pm_qos" to the asoc tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Applied "ASoC: omap-mcpdm: Add pm_qos handling to avoid under/overruns with CPU_IDLE" to the asoc tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Applied "ASoC: omap-dmic: Add pm_qos handling to avoid overruns with CPU_IDLE" to the asoc tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH] ARM: OMAP1: ams-delta: Fix audio permanently muted
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: pinctrl: k3: Introduce pinmux definitions
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH 11/17] soc: ti: pruss: add pruss_get()/put() API
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 11/17] soc: ti: pruss: add pruss_get()/put() API
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 11/17] soc: ti: pruss: add pruss_get()/put() API
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH 11/17] soc: ti: pruss: add pruss_get()/put() API
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 2/2] phy: mapphone-mdm6600: Improve phy related runtime PM calls
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH 11/17] soc: ti: pruss: add pruss_get()/put() API
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- [PATCH 00/17] Add support for TI PRU ICSS
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 01/17] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 02/17] soc: ti: pruss: Define platform data for PRUSS bus driver
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 03/17] soc: ti: pruss: Add pruss_soc_bus platform driver
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 04/17] soc: ti: pruss: Fix system suspend/MStandby config issues
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 05/17] soc: ti: pruss: Configure SYSCFG properly during probe/remove
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 06/17] soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 08/17] soc: ti: pruss: Add a PRUSS irqchip driver for PRUSS interrupts
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 09/17] soc: ti: pruss: add pruss_{request,release}_mem_region() API
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 10/17] soc: ti: pruss_intc: Add API to trigger a PRU sysevent
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 11/17] soc: ti: pruss: add pruss_get()/put() API
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 13/17] soc: ti: pruss: export pruss_intc_configure/unconfigure APIs
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 14/17] ARM: OMAP2+: use pdata quirks for PRUSS reset lines on AM335x
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 15/17] ARM: dts: AM33xx: Add the PRU-ICSS DT nodes
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 16/17] ARM: dts: AM33xx: Add PRU system events for virtio
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 17/17] ARM: dts: am335x-*: Enable PRU-ICSS nodes
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 12/17] soc: ti: pruss: add pruss_cfg_read()/update() API
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH 07/17] soc: ti: pruss: enable OCP master ports in SYSCFG always
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH 09/11] mfd: tps65910: Make it explicitly non-modular
- From: Graeme Gregory <gg@xxxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 00/11] mfd: simple demodularization of non-modular drivers
- From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
- [PATCH 09/11] mfd: tps65910: Make it explicitly non-modular
- From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
- [PATCH] ARM: dts: am335x-chiliboard: Add stdout-path property
- From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
- [PATCHv5 6/6] drm/omap: add support for manually updated displays
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- [PATCHv5 5/6] drm/omap: add framedone interrupt support
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- [PATCHv5 4/6] drm/omap: fix incorrect union usage
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- [PATCHv5 3/6] drm/omap: don't check dispc timings for DSI
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- [PATCHv5 2/6] drm/omap: populate DSI platform bus earlier
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- [PATCHv5 1/6] drm/omap: use DRM_DEBUG_DRIVER instead of CORE
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- [PATCHv5 0/6] omapdrm: DSI command mode panel support
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- Re: Subject: [PATCH v4 0/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
- Re: [PATCH v4 3/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
- [PATCH v4 1/4] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- [PATCH v4 2/4] mtd: rawnand: ams-delta: Request data port GPIO resource
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- [PATCH v4 4/4] ARM: OMAP1: ams-delta: Drop obsolete NAND resources
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- [PATCH v4 3/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- Subject: [PATCH v4 0/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: pinctrl: k3: Introduce pinmux definitions
- From: Vignesh R <vigneshr@xxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: pinctrl: k3: Introduce pinmux definitions
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: pinctrl: k3: Introduce pinmux definitions
- From: Vignesh R <vigneshr@xxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2] MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5910/OMAP310
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- [PATCH] ARM: OMAP1: devices: configure omap1_spi100k only on OMAP7xx
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- [PATCH] ARM: OMAP1/2: fix SoC name printing
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH 0/6] ARM: dts: am437x-gp-evm: Add pinctrl nodes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: am3517-evm: Enable earlycon stdout path
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: omap3-gta04: Fix comment block
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: am3/am4/dra7 clkctrl data conversion
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: timer: Remove obsolete inclusion of <asm/smp_twd.h>
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5912/OMAP310
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] ARM: OMAP2+: prm44xx: Fix section annotation on omap44xx_prm_enable_io_wakeup
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: hwmod: Fix some section annotations
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/2] phy: core: Add phy_pm_runtime_enabled
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH 0/3] ASoC: omap: Fix and add pm_qos configuration
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 1/3] ASoC: omap-mcbsp: Fix latency value calculation for pm_qos
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCHv4 5/6] drm/omap: add framedone interrupt support
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH] mmc: core: Lower max_seg_size if too high for DMA
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCHv4 5/6] drm/omap: add framedone interrupt support
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- [PATCH] dmaengine: ti: omap-dma: Configure LCH_TYPE for OMAP1
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5912/OMAP310
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH] dt-bindings: ti-tsc-adc: Add new compatible for AM654 SoCs
- From: Vignesh R <vigneshr@xxxxxx>
- Re: [PATCH v2 00/25] at24: remove
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
- Re: [PATCH v2 00/25] at24: remove
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: pinctrl: k3: Introduce pinmux definitions
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCH 2/2] iio: adc: ti_am335x_tscadc: Improve accuracy of measurement
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH 1/2] mfd: ti_am335x_tscadc: Provide unique name for child mfd cells
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH 0/2] tscadc: Couple of fixes
- From: Vignesh R <vigneshr@xxxxxx>
- Re: [PATCH] MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5912/OMAP310
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5912/OMAP310
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- [PATCH v2 2/3] regulator: core: Properly handle case where supply is the couple
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2 3/3] regulator: core: Keep regulators-list locked while traversing the list
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2 1/3] regulator: core: Use ww_mutex for regulators locking
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2] dt-bindings: regulator: Change regulator-coupled-max-spread property
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2 0/3] Coupled-regulators follow up
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v2] MAINTAINERS: update OMAP MMC entry
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v2] MAINTAINERS: update OMAP MMC entry
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH] MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5912/OMAP310
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- [PATCH 4/4] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- [PATCH 1/4] USB: omap_udc: use devm_request_irq()
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- [PATCH 2/4] USB: omap_udc: fix crashes on probe error and module removal
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- [PATCH 3/4] USB: omap_udc: fix omap_udc_start() on 15xx machines
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH 2/2] ASoC: omap-mcpdm: Add support for pdmclk clock handling
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
- Re: [PATCH 0/3] ASoC: omap: Fix and add pm_qos configuration
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
- Re: [PATCH 1/3] ASoC: omap-mcbsp: Fix latency value calculation for pm_qos
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
- Re: [PATCH v2 02/25] mtd: add support for reading MTD devices via the nvmem API
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
- Re: [PATCH v2 00/25] at24: remove
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
- Re: [PATCH v2 11/25] net: cadence: switch to using nvmem_get_mac_address()
- From: <Nicolas.Ferre@xxxxxxxxxxxxx>
- Re: [PATCHv4 6/6] drm/omap: add support for manually updated displays
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCHv4 5/6] drm/omap: add framedone interrupt support
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCHv4 3/6] drm/omap: don't check dispc timings for DSI
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCHv4 2/6] drm/omap: populate DSI platform bus earlier
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCHv4 1/6] drm/omap: use DRM_DEBUG_DRIVER instead of CORE
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCHv4 0/6] omapdrm: DSI command mode panel support
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH v2 0/4] AM654: Add pinmux support
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH v2 4/4] arm64: dts: ti: k3-am654-base-board: Add I2C nodes
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: pinctrl: k3: Introduce pinmux definitions
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: pinctrl: k3: Introduce pinmux definitions
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH v2 12/25] of: net: kill of_get_nvmem_mac_address()
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/2] phy: core: Add phy_pm_runtime_enabled
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: pinctrl: k3: Introduce pinmux definitions
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/2] phy: core: Add phy_pm_runtime_enabled
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 2/2] phy: mapphone-mdm6600: Improve phy related runtime PM calls
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/2] phy: core: Add phy_pm_runtime_enabled
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/2] Improve phy-mapphone pm
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: pinctrl: k3: Introduce pinmux definitions
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCHv4 4/6] drm/omap: fix incorrect union usage
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCHv4 0/6] omapdrm: DSI command mode panel support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Regression in next with spi return from transfer_one()
- From: Lubomir Rintel <lkundrak@xxxxx>
- Re: [PATCHv4 4/6] drm/omap: fix incorrect union usage
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH 0/2] ASoC: omap-mcpdm: Support for handling pdmclk
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH -next] PCI: dra7xx: Fix potential NULL dereference
- From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
- Re: [alsa-devel] [PATCH 0/3] ASoC: omap: Fix and add pm_qos configuration
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 0/2] ASoC: omap-mcpdm: Support for handling pdmclk
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Applied "spi: omap2-mcspi: Add missing suspend and resume calls" to the spi tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: Regression in next with spi return from transfer_one()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Regression in next with spi return from transfer_one()
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH] spi: omap2-mcspi: Add missing suspend and resume calls
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Regression in next with spi return from transfer_one()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCHv4 6/6] drm/omap: add support for manually updated displays
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- [PATCHv4 5/6] drm/omap: add framedone interrupt support
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- [PATCHv4 4/6] drm/omap: fix incorrect union usage
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- [PATCHv4 3/6] drm/omap: don't check dispc timings for DSI
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- [PATCHv4 2/6] drm/omap: populate DSI platform bus earlier
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- [PATCHv4 1/6] drm/omap: use DRM_DEBUG_DRIVER instead of CORE
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- [PATCHv4 0/6] omapdrm: DSI command mode panel support
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- [PATCH] ARM: dts: omap5: Add l4 interconnect hierarchy and ti-sysc data
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] bus: ti-sysc: Detect devices for debug on omap5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/2] ASoC: omap-mcpdm: Support for handling pdmclk
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: Regression in next with spi return from transfer_one()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/2] bus: ti-sysc: Add mcasp optional clocks flag
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/2] bus: ti-sysc: Add mcasp optional clocks flag
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/2] bus: ti-sysc: Fix getting optional clocks in clock_roles
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/2] Two non-urgent ti-sysc driver fixes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Regression in next with spi return from transfer_one()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/3] ASoC: omap: Fix and add pm_qos configuration
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 0/3] ASoC: omap: Fix and add pm_qos configuration
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH] ARM: OMAP2+: timer: Remove obsolete inclusion of <asm/smp_twd.h>
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- Re: [PATCH 0/3] ARN: OMAP1: ams-delta: Post-GPIO-refresh cleanups
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [balbi-usb:testing/next 17/22] drivers/usb/dwc3/drd.c:604: undefined reference to `usb_role_switch_unregister'
- From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
- Re: [balbi-usb:testing/next 17/22] drivers/usb/dwc3/drd.c:604: undefined reference to `usb_role_switch_unregister'
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [balbi-usb:testing/next 17/22] drivers/usb/dwc3/drd.c:604: undefined reference to `usb_role_switch_unregister'
- From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
- [balbi-usb:testing/next 17/22] drivers/usb/dwc3/drd.c:604: undefined reference to `usb_role_switch_unregister'
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH v1 2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH net-next 0/4] net: ethernet: ti: cpsw: allow vlan h/w timestamping
- From: "Strashko, Grygorii" <grygorii.strashko@xxxxxx>
- [balbi-usb:testing/next 17/22] drivers/usb/dwc3/drd.c:491:2-3: Unneeded semicolon
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH] usb: dwc3: drd: fix semicolon.cocci warnings
- From: kbuild test robot <fengguang.wu@xxxxxxxxx>
- Re: [PATCH v1 2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP1: ams-delta: Provide GPIO lookup table for LED device
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 2/2] ASoC: omap-mcpdm: Add support for pdmclk clock handling
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 1/2] dt-bindings: sound: omap-mcpdm: Update documentation for pdmclk
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 0/2] ASoC: omap-mcpdm: Support for handling pdmclk
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v1 2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v1 2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- [PATCH 2/3] ASoC: omap-mcpdm: Add pm_qos handling to avoid under/overruns with CPU_IDLE
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 3/3] ASoC: omap-dmic: Add pm_qos handling to avoid overruns with CPU_IDLE
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 1/3] ASoC: omap-mcbsp: Fix latency value calculation for pm_qos
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 0/3] ASoC: omap: Fix and add pm_qos configuration
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v1 2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v1 1/5] drivercore: Revert "deferral race condition fix"
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v1 2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [PATCH v1 2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v1 2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [PATCH v1 1/5] drivercore: Revert "deferral race condition fix"
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v1 2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v4] cpufreq: ti-cpufreq: Only register platform_device when supported
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH v1 1/5] drivercore: Revert "deferral race condition fix"
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH net-next 0/4] net: ethernet: ti: cpsw: allow vlan h/w timestamping
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH v1 2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [RFC 0/9] ASoC/ARM: Merge the davinci and omap audio directories
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v4] cpufreq: ti-cpufreq: Only register platform_device when supported
- From: Dave Gerlach <d-gerlach@xxxxxx>
- Re: [PATCH v3] cpufreq: ti-cpufreq: Only register platform_device when supported
- From: Dave Gerlach <d-gerlach@xxxxxx>
- Applied "ASoC: omap-mcbsp: Clean up dma_data addr initialization code" to the asoc tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Applied "ASoC: omap-mcbsp: Skip dma_data.maxburst initialization" to the asoc tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3] cpufreq: ti-cpufreq: Only register platform_device when supported
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH v3] cpufreq: ti-cpufreq: Only register platform_device when supported
- From: Dave Gerlach <d-gerlach@xxxxxx>
- Re: OMAP5+TWL6040: CONFIG_CPU_IDLE=y breaks (non AESS) audio
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v2 00/25] at24: remove
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH v2 01/25] nvmem: add new config option
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 04/25] ARM: davinci: dm644x-evm: use cell nvmem lookup for mac address
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 06/25] ARM: davinci: da830-evm: use cell nvmem lookup for mac address
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 08/25] ARM: davinci: dm850-evm: use cell nvmem lookup for mac address
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 09/25] ARM: davinci: da850-evm: remove unnecessary include
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v2 00/25] at24: remove
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 12/25] of: net: kill of_get_nvmem_mac_address()
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 11/25] net: cadence: switch to using nvmem_get_mac_address()
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 15/25] ARM: davinci: mityomapl138: don't read the MAC address from machine code
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 16/25] ARM: davinci: dm365-evm: use device properties for at24 eeprom
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 17/25] ARM: davinci: da830-evm: use device properties for at24 eeprom
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 18/25] ARM: davinci: dm644x-evm: use device properties for at24 eeprom
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 20/25] ARM: davinci: sffsdr: fix the at24 eeprom device name
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 22/25] ARM: davinci: remove dead code related to MAC address reading
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 24/25] ARM: davinci: mityomapl138: use device properties for at24 eeprom
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 25/25] eeprom: at24: remove at24_platform_data
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 23/25] ARM: davinci: mityomapl138: use nvmem notifiers
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 21/25] ARM: davinci: sffsdr: use device properties for at24 eeprom
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 19/25] ARM: davinci: dm646x-evm: use device properties for at24 eeprom
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 14/25] ARM: davinci: da850-evm: remove dead MTD code
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 13/25] net: davinci_emac: use nvmem_get_mac_address()
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 10/25] net: ethernet: provide nvmem_get_mac_address()
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 07/25] ARM: davinci: mityomapl138: use cell nvmem lookup for mac address
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 05/25] ARM: davinci: dm646x-evm: use cell nvmem lookup for mac address
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 03/25] ARM: davinci: dm365-evm: use cell nvmem lookup for mac address
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 02/25] mtd: add support for reading MTD devices via the nvmem API
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 00/25] at24: remove
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH] config: arm: omap2: remove PROVE_LOCKING from defconfig
- From: Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2 4/4] arm64: dts: ti: k3-am654-base-board: Add I2C nodes
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH v2 2/4] arm64: dts: ti: k3-am65: Add pinctrl regions
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH v2 3/4] arm64: dts: ti: am654-base-board: Add pinmux for main uart0
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH v2 0/4] AM654: Add pinmux support
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH v2 1/4] dt-bindings: pinctrl: k3: Introduce pinmux definitions
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH AUTOSEL 4.18 32/39] clk: ti: fix OF child-node lookup
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.19 36/44] clk: ti: fix OF child-node lookup
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Re: omap_hsmmc + gta04 + sdio irq + runtime_suspend + 4 bit = trouble
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: omap_hsmmc + gta04 + sdio irq + runtime_suspend + 4 bit = trouble
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: omap_hsmmc + gta04 + sdio irq + runtime_suspend + 4 bit = trouble
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: OMAP5+TWL6040: CONFIG_CPU_IDLE=y breaks (non AESS) audio
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: omap_hsmmc + gta04 + sdio irq + runtime_suspend + 4 bit = trouble
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL] ARM: SoC fixes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] mmc: core: Lower max_seg_size if too high for DMA
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v1 1/5] drivercore: Revert "deferral race condition fix"
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH net-next 0/4] net: ethernet: ti: cpsw: allow vlan h/w timestamping
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH net-next 4/4] net: ethernet: ti: cpsw: allow vlan tagged packets to be timestamped
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH net-next 3/4] net: ethernet: ti: cpts: move enable/disable flags outside of cpts module
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH net-next 1/4] net: ethernet: ti: cpts: correct debug for expired txq skb
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH net-next 2/4] net: ethernet: ti: cpts: purge staled skbs from txq
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: [RFC 0/9] ASoC/ARM: Merge the davinci and omap audio directories
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v3 0/8] ASoC: omap-mcbsp: Cleanup and split core/sidetone support
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v1 2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 4/5] usb: dwc3: drd: Switch to device property for 'extcon' handling
- From: Felipe Balbi <balbi@xxxxxxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix missing of_platform_depopulate()
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH v3 0/4] omapdrm: Fix runtime PM issues at module load and unload time
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [GIT PULL] ARM: SoC fixes
- From: Corentin Labbe <clabbe.montjoie@xxxxxxxxx>
- Re: [PATCH v1 2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [RFC 0/9] ASoC/ARM: Merge the davinci and omap audio directories
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
- Re: [PATCH v1 1/5] drivercore: Revert "deferral race condition fix"
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH] ARM: OMAP1: ams-delta: Provide GPIO lookup table for LED device
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH v3 4/4] drm/omap: Move DISPC runtime PM handling to omapdrm
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH v3 3/4] drm/omap: dsi: Ensure the device is active during probe
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH v3 2/4] drm/omap: hdmi4: Ensure the device is active during bind
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH v3 1/4] drm/omap: Populate DSS children in omapdss driver
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH v1 2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- [PATCH v2 0/3] mach-omap2: handle autoidle denial
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v2 1/3] clk: ti: add a usecount for autoidle
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v2 3/3] arm: omap_hwmod disable ick autoidling when a hwmod requires that
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v2 2/3] clk: ti: check clock type before doing autoidle ops
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v1 3/5] staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v1 2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v1 1/5] drivercore: Revert "deferral race condition fix"
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/5] drivercore: Revert "deferral race condition fix"
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH v1 1/5] drivercore: Revert "deferral race condition fix"
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 5/5] usb: dwc3: drd: Add support for DR detection through extcon
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 2/5] extcon: Return -EPROBE_DEFER when extcon device is not found
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 3/5] staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 4/5] usb: dwc3: drd: Switch to device property for 'extcon' handling
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [GIT PULL] ARM: SoC fixes
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [PATCH v3 0/8] ASoC: omap-mcbsp: Cleanup and split core/sidetone support
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
- [PATCH v3 4/4] drm/omap: Move DISPC runtime PM handling to omapdrm
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v3 3/4] drm/omap: dsi: Ensure the device is active during probe
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v3 2/4] drm/omap: hdmi4: Ensure the device is active during bind
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v3 1/4] drm/omap: Populate DSS children in omapdss driver
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v3 0/4] omapdrm: Fix runtime PM issues at module load and unload time
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] clk: ti: add a usecount for autoidle
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v3 3/3] MAINTAINERS: Add entry for i2c-omap driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 0/3] i2c-omap: Enable i2c-omap driver for AM654 SoCs
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 3/3] MAINTAINERS: Add entry for i2c-omap driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 3/3] MAINTAINERS: Add entry for i2c-omap driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH v4 2/3] i2c: busses: Kconfig: Enable I2C_OMAP for ARCH_K3
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH v4 3/3] MAINTAINERS: Add entry for i2c-omap driver
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH v4 1/3] dt-bindings: i2c-omap: Add new compatible for AM654 SoCs
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH v4 0/3] i2c-omap: Enable i2c-omap driver for AM654 SoCs
- From: Vignesh R <vigneshr@xxxxxx>
- Re: [PATCH 1/2] dt-bindings: pinctrl: k3-am6: Introduce pinmux definitions
- From: Nishanth Menon <nm@xxxxxx>
- Re: mainline/master boot bisection: v4.19-12838-g71e56028173b on beagle-xm
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: pinctrl: k3-am6: Introduce pinmux definitions
- From: Vignesh R <vigneshr@xxxxxx>
- Re: omap_hsmmc + gta04 + sdio irq + runtime_suspend + 4 bit = trouble
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v2 net-next 0/4] net: ethernet: ti: cpsw: fix vlan mcast
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: mainline/master boot bisection: v4.19-12838-g71e56028173b on beagle-xm
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: mainline/master boot bisection: v4.19-12838-g71e56028173b on beagle-xm
- From: Kevin Hilman <khilman@xxxxxxxxxxxx>
- [PATCH v2 net-next 2/4] net: 8021q: vlan_core: allow use list of vlans for real device
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH v2 net-next 4/4] net: ethernet: ti: cpsw: fix vlan configuration while down/up
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH v2 net-next 3/4] net: ethernet: ti: cpsw: fix vlan mcast
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH v2 net-next 1/4] net: core: dev_addr_lists: add auxiliary func to handle reference address updates
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH v2 net-next 0/4] net: ethernet: ti: cpsw: fix vlan mcast
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: omap_hsmmc + gta04 + sdio irq + runtime_suspend + 4 bit = trouble
- From: Adam Ford <aford173@xxxxxxxxx>
- Re: omap_hsmmc + gta04 + sdio irq + runtime_suspend + 4 bit = trouble
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix missing of_platform_depopulate()
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH] ARM: OMAP1: ams-delta: Fix possible use of uninitialized field
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: am3517-som: Fix WL127x Wifi interrupt
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix missing of_platform_depopulate()
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: omap_hsmmc + gta04 + sdio irq + runtime_suspend + 4 bit = trouble
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix missing of_platform_depopulate()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] config: arm: omap2: remove PROVE_LOCKING from defconfig
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v1 10/11] regulator: core: Use ww_mutex for regulators locking
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH] ARM: multi_v7_defconfig: Enable 8250-omap serial driver and use it by default
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: mainline/master boot bisection: v4.19-12838-g71e56028173b on beagle-xm
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL] ARM: SoC fixes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC 0/9] ASoC/ARM: Merge the davinci and omap audio directories
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: ti: k3-am65: Add pinctrl regions
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 3/3] MAINTAINERS: Add entry for i2c-omap driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: ti: k3-am65: Add pinctrl regions
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 1/2] dt-bindings: pinctrl: k3-am6: Introduce pinmux definitions
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH v1 10/11] regulator: core: Use ww_mutex for regulators locking
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/2] arm: omap_hwmod disable ick autoidling when a hwmod requires that
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH v3 3/3] MAINTAINERS: Add entry for i2c-omap driver
- From: Vignesh R <vigneshr@xxxxxx>
- Re: [PATCH v2 0/7] ASoC: omap-mcbsp: Cleanup and split core/sidetone support
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH 1/2] dt-bindings: pinctrl: k3-am6: Introduce pinmux definitions
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH 0/2] AM654: Add pinmux support
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH 2/2] arm64: dts: ti: k3-am65: Add pinctrl regions
- From: Vignesh R <vigneshr@xxxxxx>
- Re: [PATCH 2/2] arm: omap_hwmod disable ick autoidling when a hwmod requires that
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH 1/2] clk: ti: add a usecount for autoidle
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH 2/2] arm: omap_hwmod disable ick autoidling when a hwmod requires that
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH v3 3/3] MAINTAINERS: Add entry for i2c-omap driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH v3 1/3] dt-bindings: i2c-omap: Add new compatible for AM654 SoCs
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH v3 3/3] MAINTAINERS: Add entry for i2c-omap driver
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH v3 2/3] i2c: busses: Kconfig: Enable I2C_OMAP for ARCH_K3
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH v3 0/3] i2c-omap: Enable i2c-omap driver for AM654 SoCs
- From: Vignesh R <vigneshr@xxxxxx>
- [RFC 0/9] ASoC/ARM: Merge the davinci and omap audio directories
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [RFC 1/9] ASoC: ti: Merge davinci and omap directories
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [RFC 8/9] ARM: davinci_all_defconfig: Update the audio options
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [RFC 7/9] ARM: omap1_defconfig: Do not select ASoC by default
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [RFC 9/9] ASoC: ti: Kconfig: Remove the deprecated options
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [RFC 5/9] ARM: davinci: dm365-evm: Update for the new ASoC Kcofnig options
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [RFC 2/9] MAINTAINERS: Add entry for sound/soc/ti and update the OMAP audio support
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [RFC 6/9] ARM: omap2plus_defconfig: Update the audio options
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [RFC 4/9] ARM: OMAP2: Update for new MCBSP Kconfig option
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [RFC 3/9] ARM: OMAP1: Makefile: Update for new MCBSP Kconfig option
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v3 8/8] ASoC: omap-mcbsp: No need to initialize max_xx_thres when it is not used
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v3 6/8] ASoC: omap-mcbsp: Re-arrange files for core McBSP and Sidetone function split
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v3 7/8] ASoC: omap-mcbsp: Remove redundant check for mcbsp->pdata
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v3 4/8] ASoC: omap-mcbsp: Simplify the mcbsp_start/_stop function parameters
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v3 5/8] ASoC: omap-mcbsp: Move out the FIFO check from set_threshold and get_delay
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v3 1/8] ASoC: omap-mcbsp: Clean up dma_data addr initialization code
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v3 2/8] ASoC: omap-mcbsp: Skip dma_data.maxburst initialization
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v3 3/8] ASoC: omap-mcbsp: Clean up the interrupt handlers
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v3 0/8] ASoC: omap-mcbsp: Cleanup and split core/sidetone support
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v2 0/7] ASoC: omap-mcbsp: Cleanup and split core/sidetone support
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 0/2] mach-omap2: handle autoidle denial
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH] ARM: OMAP1: ams-delta: Fix possible use of uninitialized field
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- [PATCH 2/3] ARM: OMAP1: ams-delta: Drop unused symbols from the board header
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- [PATCH 3/3] ARM: OMAP1: ams-delta: Move AMS_DELTA_LATCH2_NGPIO to the board file
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- [PATCH 1/3] ARM: OMAP1: ams-delta: Drop board specific global GPIO numbers
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- [PATCH 0/3] ARN: OMAP1: ams-delta: Post-GPIO-refresh cleanups
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- Re: [PATCH v2 0/7] ASoC: omap-mcbsp: Cleanup and split core/sidetone support
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
- Re: mainline/master boot bisection: v4.19-12838-g71e56028173b on beagle-xm
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: mainline/master boot bisection: v4.19-12838-g71e56028173b on beagle-xm
- From: Guillaume Tucker <guillaume.tucker@xxxxxxxxxxxxx>
- Re: [RFC PATCHv2 4/9] drm/tidss: add new driver for TI Keystone platforms
- From: Daniel Vetter <daniel@xxxxxxxx>
- Re: [RFC PATCHv2 4/9] drm/tidss: add new driver for TI Keystone platforms
- From: Daniel Vetter <daniel@xxxxxxxx>
- Re: [RFC PATCHv2 4/9] drm/tidss: add new driver for TI Keystone platforms
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix missing of_platform_depopulate()
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [RFC/PATCH] drm/omap: Move DISPC runtime PM handling to omapdrm
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v2 5/7] ASoC: omap-mcbsp: Re-arrange files for core McBSP and Sidetone function split
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 6/7] ASoC: omap-mcbsp: Remove redundant check for mcbsp->pdata
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 7/7] ASoC: omap-mcbsp: No need to initialize max_xx_thres when it is not used
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 3/7] ASoC: omap-mcbsp: Simplify the mcbsp_start/_stop function parameters
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 4/7] ASoC: omap-mcbsp: Move out the FIFO check from set_threshold and get_delay
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 2/7] ASoC: omap-mcbsp: Clean up the interrupt handlers
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 1/7] ASoC: omap-mcbsp: Clean up dma_data addr initialization code
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 0/7] ASoC: omap-mcbsp: Cleanup and split core/sidetone support
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 2/2] ARM: Kconfig: remove useless "default n"
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH 6/6] ARM: dts: am437x-gp-evm: Add sleep state for beeper pins
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 5/6] ARM: dts: am437x-gp-evm: Add pinmux for gpio0 wake
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 4/6] ARM: dts: am437x-gp-evm: Add uart0 pinctrl default and sleep states
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 3/6] ARM: dts: am437x-gp-evm: Add pinctrl for debugss pins
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 2/6] ARM: dts: am437x-gp-evm: Add pinctrl for unused_pins
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 1/6] ARM: dts: am437x-gp-evm: Add state for ddr3 vtt toggle pin
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 0/6] ARM: dts: am437x-gp-evm: Add pinctrl nodes
- From: Keerthy <j-keerthy@xxxxxx>
- Re: [PATCH RFC] ARM: DTS: AM3517-evm: Enabled Extended Interrupts
- From: Adam Ford <aford173@xxxxxxxxx>
- [PATCH v2] MAINTAINERS: update OMAP MMC entry
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: omap_hsmmc + gta04 + sdio irq + runtime_suspend + 4 bit = trouble
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: omap_hsmmc + gta04 + sdio irq + runtime_suspend + 4 bit = trouble
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: omap_hsmmc + gta04 + sdio irq + runtime_suspend + 4 bit = trouble
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Applied "ASoC: omap: Remove unused machine driver for AM3517-evm" to the asoc tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: OMAP5+TWL6040: CONFIG_CPU_IDLE=y breaks (non AESS) audio
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH RFC] ARM: DTS: AM3517-evm: Enabled Extended Interrupts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: omap_hsmmc + gta04 + sdio irq + runtime_suspend + 4 bit = trouble
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: Kconfig: remove useless "default n"
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] drm/omap: dsi: Fix missing of_platform_depopulate()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] ARM: OMAP: PM: Change to use DEFINE_SHOW_ATTRIBUTE macro
- From: Yangtao Li <tiny.windzz@xxxxxxxxx>
- [PATCH] ARM: OMAP1: clock: Change to use DEFINE_SHOW_ATTRIBUTE macro
- From: Yangtao Li <tiny.windzz@xxxxxxxxx>
- [PATCH 2/2] ARM: Kconfig: remove useless "default n"
- From: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
- Re: [RFC/PATCH] drm/omap: Move DISPC runtime PM handling to omapdrm
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: mainline/master boot bisection: v4.19-12838-g71e56028173b on beagle-xm
- From: Guillaume Tucker <guillaume.tucker@xxxxxxxxxxxxx>
- Re: [RFC/PATCH] drm/omap: Move DISPC runtime PM handling to omapdrm
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH] ARM: OMAP1: ams-delta: Provide GPIO lookup table for LED device
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- [PATCH] ARM: OMAP1: ams-delta: make board header file local to mach-omap1
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- Re: [RFC/PATCH] drm/omap: Move DISPC runtime PM handling to omapdrm
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/4] drm/omap: hdmi4: Ensure the device is active during bind
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 0/3] omapdrm: Fix runtime PM issues at module load and unload time
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC/PATCH] drm/omap: Move DISPC runtime PM handling to omapdrm
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 3/4] drm/omap: dsi: Ensure the device is active during probe
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 2/4] drm/omap: hdmi4: Ensure the device is active during bind
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 1/4] drm/omap: Populate DSS children in omapdss driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [RFC/PATCH] drm/omap: Move DISPC runtime PM handling to omapdrm
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Linux WPAN Networking]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]