* Tony Lindgren <tony@xxxxxxxxxxx> [181127 17:55]: > The only option that works for omap5 at palmas end is if > PALMAS_POLARITY_CTRL_INT_POLARITY is cleared. Setting the SoC internal > pulls does not make a difference, so I suspect there is either some > unknown pull-up/pull-down configuration register in palmas, or there > is an external pull resistor. Remuxing the palmas interrupt to gpio_wk16 instead of sys_nirq1 makes the palmas interrupt work just fine configured with active-low or active-high with the internal pulls. So palmas.c is doing the right thing, and the issue configuring palmas interrupt active-high with sys_nirq1 on omap5 is somewhere between omap wkupegen and GIC. Regards, Tony
